Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.7 LAccepted-AOC 0 0 MOH SITARGANJ PIPRI POST UKHLI KATRA SHAHJAHANPUR UTTAR PRADESH 242301 SHAHJAHANPUR SHAHJAHANPUR UTTAR PRADESH 242301 | SHAHJAHANPUR | UTTAR PRADESH | 242301 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹46.8 L+₹4.8 L (11.5%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹47.3 L+₹5.3 L (12.7%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹48.0 L+₹6.0 L (14.2%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹48.4 L+₹6.4 L (15.1%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
6 Sept 2023, 6:00 pmClosed
GE(AF) GORAKHPUR
GE(AF) GORAKHPUR
REPAIR MAINT OF SEWAGE LINE SYSTEM, COMPOUND WALL, FENCING AND GATE AND CLEANING OF SEWAGE LINE AT GRD UNDER GE AF STN GORAKHPUR
2023_MES_600657_3
9052/E8
Open Tender
Civil Works
Item Rate
330 days
GE(AF) GORAKHPUR
Class D Cat a ii
8 documents required · 8 mandatory
₹500
Yes
GE(AF) GORAKHPUR
₹86,000
Yes
29 Sept 2023
19 Aug 2023
8 Sept 2023
19 Aug 2023
6 Sept 2023
31 Aug 2023
19 Aug 2023 - 22 Aug 2023
Amount
Demolition of cement concrete (unreinforced) in ground floors and roof and paving not exceeding 15 cm thickness (below or above ground level) .complete all as specified and directed at site.
Ditto here in above but in RCC ( reinforcement cut as required to facilitate demolition) .complete all as specified and directed at site.
M&L for PCC (1:4:8) type C-2, (using 40mm graded stone aggregate) as in foundation, mass fillings,sub base etc. complete all as specified & directed.
M&L for Precast RCC 1: 2:4 type B1 (nominal mix ) using 20mm graded stone aggregates as in drain/MH cover slab etc complete all as specifide and directed .
M&L plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate in surface channels and drains complete all as specified and directed
M&L plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping complete all as specified and directed
S&F10mm diaTMT bars cut to legth, bent to shape required including cranking bending spirally for hooping for slab for manhole etc complete all as directed.
Extra for forming fair finished drain or channel up to 30 cm inner girth in cement concrete using extra cement incl forms, moulds, mitred/stopped ends etc.
Demolition of brick work built in cement mortar or cement lime mortar .complete all as specified and directed at site.
M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed at site.
All as per Item No- 10 here in above but except bricks..complete all as specified and directed at site.
M&L for brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4).
Taking down cement or cement lime plaster any description on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed
M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed
Preparation of old plaster surfaces of wall and applying two coat of White washing complete all as specified and directed.
Preparation of new plaster surfaces of wall and applying three coats of White washing complete all as specified and directed.
Preparation of new plaster surfaces of wall and applying two coats of cement base paint with one coat of white cement primer on new surface complete all as specified as directed.STEEL GRAY Shade and tint shall be decided by the GE.
Preparation of old plaster surfaces of wall including complete removal of existing treatment and applying two coats of cement base paint over a coat of white cement primer complete all as specified as directed. STEEL GRAY Shade and tint shall be decided by the GE.
M&L for preparing of old decorated surfaces and applying one coat of cement based paint STEEL GRAYon walls complete all as specified and as directed.
M&L for 50mm thick cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor / paving laid in panels, surface finished even and fair without using extra cement complete all as specified and directed.
M&L 75 mm PCC (1:2:4 ) type B2 using 40 mm graded aggregate as in floors,hard standing, sub base floor finished the surface even and smooth without using extra cement and spike rolling to surface or making impressions of expanded metal whilst the concrete is green .complete all as specified and directed at site.
M&L in repairs for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified including 25 mm sand cutioning .complete all as specified and directed at site.
M&L for precast designer chequered tiles rubber moulded (factory made rectified) of size tiles 300mX300mmX25mm,top layer glazed made in any type of cement and pigment in required patterns(compressive strength not less than250 kg per Sqm) including 20 mm 1:6 Screed bed .complete all as specified and directed at site.
Dismantling stone slab & tiles of any description complete all specified and directed
S&F 20 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like 20 mm cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite .complete all as specified and directed at site.
Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises .
M&L Non skid joint less colour Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick cement mortar 1:6 bedding .complete all as specified and directed at site.
S&F Glazed ceramic coloured tiles 300x450x7mm thick in skirting dados risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over 15mm thick rcement plaster in cm 1:4 complete all as specified as directed..
M&L Light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick cement mortar 1:6 bedding.
M&L for spot welding in repairs not exc 2.5cm in length exc 6mm but n.exc 9mm thick complete all as specified and as directed.
Excavation in post holes (or similar holes) each n.exc 0.5cum getting out, returning, filling in watering and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm thick in soft/loose soil, making good surface and disposal of surfaces spoil to a distance not exc 50 Mtrs complete all as specified and as directed.
M&L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in filling, mass concrete and similar work complete all as specified and directed.
Dismantling mild steel work of any description not otherwise provided for any position complete all specified by Engineer-in-Charge.
Dismantling MS grills/guard bars from window frames/varandah railing and from gate complete all as specified and directed.
S&F framed work such as grills, gate etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conf to Fe 290 Gde E 165 complete all as specified and directed.
M&L for MS angle iron post flat, square/pipe tube, round bar such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, post gate, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work and struts in fencing including cutting tops to shape as directed, drilled holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting screws, etc and similar work complete all as specified
Fixing only for angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire etc. including all necessary drilling, bolting or riveting etc. conforming to Fe 290 Gde E-165, complete all as specified and directed.
Dismantling security fencing wire any type (babed wire, chinling fencing, GI mesh etc) all as specified and directed
Supply only Chain link MS galvanised fencing conforming to IS 2721: 2003 including line wires of 3.15mm dia straining bolts, etc including provision of binding wire . (Weight of chain link fencing shall be decided through a BOO)
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire
Restraining, resecuring including making good staples etc for Chain link MS galvanised fencing complete all as specified and directed at site.
S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
Restraining, resecuring including making good staples etc for Galvanised steel barbed wire complete all as specified and directed at site.
S&F in repair 610 mm dia punchhed tape concertina coil (effectve dia 550mm at stretch iength of coil 6 m) two hendle and spikes at bot ends of ends of coil with dove tail clipes (18 SWG ) including razor wire (07 No) 6m length in each wire width medium size ,barbed length 20 mm and barbed 14mm inclucding 51 pins 128 No of clips in each coil inluding 230 gm / sqm Zinc coating on core ire complete all as spd and directed.
M&L preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.
M&L preparation of old steel surfaces of any description and applying one coats of synthetic enamel paint complete all as specified.
Taking down or down steel tubing and connections 15 mm bore .complete all as specified and directed at site.
Taking down or down steel tubing and connections 20 mm bore .complete all as specified and directed at site.
S&F steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls (concealed) or laid in floors all as specified and directed.
All same as per item No. 50 here in above but only fixing .complete all as specified and directed at site.
S&F steel water tubing 20 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls (concealed) or laid in floors all as specified and directed.
All same as per item No. 52 here in above but only fixing .complete all as specified and directed at site.
Excavation in trenches n.exc 1.5M wide and n.exc 1.5M depth and n.exc 10 Sqm on plan and getting out in any type of soil (for manholes and sewage lines, drain etc.) .complete all as specified and directed at site.
Returning filling in including spreading watering and well raming in layer . Exc 25 cm each in loose/soft soil complete all as specified and directed.
Removing excavated material to a distance not exc 50 m and depositing where directed, complete all as specified and directed
Demolation and breaking up 150mm dia drain pipes ( salt glazed ware, AC or reinforced Concrete ) set in cement mortar complete all as specified.
Demolation and breaking up 200mm dia drain pipes ( salt glazed ware, AC or reinforced Concrete ) set in cement mortar complete all as specified.
Concrete bed to drain pipes in PCC 1:4:8 type D2 using 40mm grade stone aggregate including packing under and haunching against the sides of pipe after they are laid and tested for the following :-(a) 150mm bore pipe.
(b ) 200mm bore pipe
S&F Reinforced conctrete 150mm bore of pipes class NP2, laid and jointed complete with collars all as specified and directed :-
S&F Reinforced conctrete 200mm bore of pipes class NP2, laid and jointed complete with collars all as specified and directed :-
Cutting into existing manholes for connecting new drains and making good to pipe and rendering cutting out existing bending for and forming branch channel in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for pipe 150mm bore complete all as specified and directed.
De-silting of sewer line 150/200mm dia with mechanical device like super sucker machine, high pressure jetting machine/gantry machine or any other mechanical device & cleaning site all as specified and directed by Engineer-in-Charge.
Material and labour for Cleaning/removal of blockage from bathroom,EWC/IWC (any type), kitchen, WHB and urinals including connected Nahani traps / gully traps/floor traps, grating of trap, waste pipes, pipe in any length upto first manhole etc choked with mud / other accumulated sludge and getting out, washing thoroughly at any location, at any floor by rodding/choke remover/Pressure technique/manually or otherwise to clear blockage upto entire satisfaction of users,including refixing of oval assess door covers with new nuts & washers and refixing manhole covers, including removing of all wastes, solid or liquid sludge and depositing the sludge in a pit (at empty/open area) of suitable size at a distance exceeding 50 metres from the building where directed and covering the same with the soil obtained from excavation of pit after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases including all excavations and earthwork complete all as specified andas directed .(a) Contractor must employ Minimum 3 Nos labourers daily deployed i.e. 1 No in Vijay vihar, 01 No in GRD and 1 No for NCC area, complete all as specified and as directed . (b) Contractor or his representative shall report daily at 09.00 AM except on Sunday/ National holidays in the office of Engineer-in-Charge/ Complaint cell to receive complaint slip and necessary directions. Complaints received through telephonic message from JE/ Engineer-in-Charge shall also be attended on the same day and the completion of work shall be reported by 05.00 PM of every working day to JE/ Engineer-in-Charge. (c) In case of non attedence of complaints against BOQ item 64 above by the contractor on the same day, a penalty of Rs 200/- per complaint per day and for complaints against BOQ item 63 above, a penalty of Rs 100/- per complaint per day will be recovered from the contractor due complete all as specified and as directed . (d) The cost for all necessary T&P such as green female bamboo strips, iron rods, sewage rodding machine, buckets, rope, ladder, safety mask, bleaching powder etc and all other other materials for execution of the work shall be included in the unit rate complete all as specified and as directed . (e) A complaint register shall be maintained by JE and proper record of complaints received and attended with date and time shall be recorded and shall be signed daily by both the parties. Complaint register shall be kept on record of Engineer-in-Charge after completion of work complete all as specified and as directed .
Cleaning of septic tanks / Manholes including bailing out water, from it and removing sludge and blockages from inlet and outlet of sewer lines including taking out the excavated sludge and carting away the same to a distance far away from residential/office area and cover the same with fresh earth and recommissioning the septic tank including site clearance to a distance of 3 Metre around septic tank complete all as specified and directed for the following capacity :- (a) For Manhole n. exc 1.50m deep.
(b) For Manhole exc 1.50m but n.exc 3m deep.
(c) For septic tank of 25 to 50 user capacity.
Dewatering of septic tank, sump wells including bailing out water, from it and removing sludge and blockages from inlet and outlet of sewer lines including taking out the excavated sludge and carting away the same to a distance far away from residential/office area and cover the same with fresh earth and recommissioning the same including site clearance to a distance of 3 metre around complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern, with EWC including p or s trap ,seat cover , including connection to trap /drain and to flushing pipe anti syphonage pipe etc complete including making good floorcomplete all as specified as directed.
S&F in repair vitreous chaina squating pan orissa pattern size 580X 440mm white with intregal foot rest complete including lime concrete(excl flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc complete fixed in repair complete all as specified as directed.
S&F in repairs angle valves, 15 mm dia cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed all as specified and directed.
Supply and fix in repairs 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairs all as specified and directed.
S & F in Repair Two way Angle cock with wall flange complete all as specified as directed.
S & F Health faucet with 1 meter long easy flex tube in chrome finish and wall hook with NRV( Back flow preventer)(JAQUAR Cat Part No-ALD-CHR-579)
S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed. Make-Cera/Hindware or equivalent
S&F in repairs 15 mm bore PVC connection 45cm long with brass nuts and washers on both ends all as in repairs specified and directed.
Taking down rain water / vent pipe of any description including fittings etc including removal to store, complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls ,floors, trenches etc complete all specified and directed.
S&Fin repair PVC (SWR) P or S trap 125/110 mm,setting and jointing with solventcement complete all specified and directed.
M&L in repair 75mm dia PVC (SWR) floor trap, plane with grating including jointing with solvent cement complete all specified and directed.
S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
S&F 75mm PVC (SWR) bends anyradius complete all specified and directed.
S&F in repair CP Grating 125 mm size complete all as specified as directed.
Supply and fixing PVC (SWR) bends (any radius) 100/110mm complete all specified.
Supply and fixing PVC (SWR) Junction single ,(single T) equal or un equal (any radius) 100/110mm complete all specified.
S & F Joist, channel, angle, or tee sections, FI Strip for monkey cage,for water tank cover,etc fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)
M/S DIVYA TRADERS
M/S B.P. CONSTRUCTION
m/s allied enterprises
M/S SHAILZA TRADERS
M/s Rajmani Engineers
Yaduvanshi Traders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .