Construction of 1 No. Forest Guard Quarter Office at Palkudar of Kansar Section in Deogarh Range under Deogarh Forest Division for the year 2025-26 .

Earth work in excavation of foundation trenches in all kinds of soil incluidng moorum stoney earth and earth mixed with boulders except sheet rock and boulders requiring blasting, including dressing and levelling the bed up to the required depth and depositing the excavated materials with all leads and lifts, T&P. shoring and shuttering if required etc.complete as directed by the Engineer-in-charge

Supplying and filling foundation and plinth with sand well watered and rammed with cost, conveyance, royalities of all materials complete (Measurement to be taken on compacted section only)

Cement concrete (1:3:6) in foundation and floor i;e below the base course of terrazo flooring using 4cm (1½”) size black crusher hard broken granite chips metal of approved quality and from approved quarry, including lowering, laying concrete, watering curing etc. complete to required level laid in layers not exceeding 1'-6" thick including cost, conveyance, royalitiesof all materials and cost of all labour, T&P. required for the work etc. complete as per direction of the Engineer-in-charge

R.C.C. (1:2:4) ........... having a minimum compressive strength ( in work test) 150 kg/cm2 cubes at 28 days after mixing and tests conducted in accordance with I.S. 456 and I.S. 516 using 12mm to 20mm size black hard crusher broken granite chips of approved quality and from approved quarry (20mm size not to exceed 25%) including hoisting, lowering, laying, compacting concrete watering and curing for 28 days centering, shuttering, finishing the exposed surface smooth, providing grooves or beads where necessary, as directed including cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work etc. complete in all respect but excluding the cost of M.S. roads or Tor steel and binding wire and labour charges for bending binding and tying the grills Cloum base

Gade beam

Lintel Bend

Chajja

Roof beam

Roof Slab

Cutting, straightening the bent up M.S. Rods or Tor steel, bending, binding, welding joining if necessary and tying the grills and placing in position as required for R.C.C. works and for providing required no of fan hooks hoisting, lowering, laying including, cost, conveyance of all M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work bending, binding and tying the grills in all floors (Payment will be made on weight of M.S. Rods or Tor steel only and no separate payment will be made towards the weight of binding wires)

Fly ash brick masonry in cement mortar (1:6) using 25x12x8cm size bricks after immersing the bricks for six hours in water before use in Foundation and Plinth including, splays cutting, circular moulding and carbelling, champhering and similar such type of works watering, curing etc. all complete including cost, conveyance, royalties of all materials and cost of all labour, and T&P required for the work etc. complete (Crushing strength of bricks should not be less than 75kg to 99 kg/cm2 with dimensional tolerance +3%/8%)

Fly ash brick masonry in cement mortar (1:6) using 25x12x8cm size bricks after immersing the bricks for six hours in water before use in Superstructure including, splays cutting, circular moulding and carbelling, champhering and similar such type of works watering, curing etc. all complete including cost, conveyance, royalties of all materials and cost of all labour, and T&P required for the work etc. complete (Crushing strength of bricks should not be less than 75kg to 99 kg/cm2 with dimensional tolerance +3%/8%)

12mm (½") thick cement plaster (1:6) over brick masonary finished smooth, after racking out the joints including watering and curing etc. with cost, conveyance, royalities of all materials and cost of all labour and T&P required for the work etc. complete as per direction of the Engineer-in-charge

16mm (5/8") thick cement plaster (1:6) over brick masonry finished smooth, after racking out the joints including watering and curing etc. with cost, conveyance, royalties of all materials and cost of all labour and T&P required for the work etc. complete as per direction of the Engineer-in-charge

6mm thick cement plaster (1:4) over ceilling plaster finished smooth after chipping, chiselling & cleaning including watering, curing etc. with cost, conveyance, royality and taxes of all materials, labour, T&P required for the work etc. complete

12mm (½") thick cement plaster (1:4) over brick masonary fiwith neat Cement Punning etc. with cost, conveyance, royalities of all materials and cost of all labour and T&P required for the work etc. complete as per direction of the Engineer-in-charge

Finshing Wall Surface of Wall with Acrylic wall putty (Waterbased)

25mm thick grading Concrete (1:2:2) over roof slab using 12mm & down graded size black hard crusher broken granite chips of approved quality and from approved quarry, including finished smooth with proper slope after chipping, chiselling and cleaning the roof slab including hoisting, watering, curing, cost, conveyance, royalities of all materials and cost of all labour, T&P required for the work etc. complete as per direction of the Engineer-in-charge

Providing Vettrified tiles for floor

Provding vertified tiles on walls

Provding ceramic glazed tiles for floor

Provding ceramic glazed tiles for Wall

Supplying fitting fixing of pannleed shutter

Supplying fitting fixing of grill & grill door

Suppling fitting MS Angular frame etc

Painting two coats on new wood work / iron work ober a coat of priming

Suppling fitting fixing of door shutters (GRP) of 32 mm thick

Suppling fitting fixing of door frame (GRP) of 75 mmx 100 mm thick

Wall painting two coats with platic emulsion paint of approved shade inluding cost of paint

Painting two coats with weather coats of approved shade inlucing cost of paint

Providing P.H fitting

Providing E.I Fitting