Certain repair to boundary wall, fencing, plaster and drain of installation buildings under the AOR of AGE W/S-lll and AGE E/S-lll under AGE (I) (U) B/R, Delhi Cantt-10

Amount

Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered external surface of walls, pillars, cornices, chajja, facia, dropwall, parapet, roof projection and applying two coats of weather proofing coats of 100% Premium acrylic emulsion exterior paint with Graco 490 spray machine, having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10Sqm including applying 1mm thick external wall care putty over disturbed surface during preparation or any reason with sanding for smooth surface, allow 6-8 hrs to dry the surface for painting of subsequent coats etc. all work, complete all as specified and as directed.

M&L for 10mm thick rendering plaster in cement mortar 1:6 on brickwork or concrete surface of wall (Internal Surfaces) finished even & smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for two coats of oil bound distemper including preparation of new plastered internal surfaces of wall over one coat of wall care putty (not less than 1mm thick) complete all as specified and directed.

M&L for applying 5mm thick rendering plaster in cement mortar 1:3 on ceiling surface, finished even & smooth without using extra cement on brick/concrete surfaces, complete all as specified and directed by Engr-in-Charge.

M&L for two coats of oil bound distemper including preparation of new plastered surfaces of ceiling over one coat of wall care putty (not less than 1mm thick) complete all as specified and directed.

Dismantling of brick masonry work built in cement mortar or cement lime mortar complete all as specified and directed by Engr-in-Charge.

Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

- ditto - all as per above item No.10 but except bricks.

M&L for washed stone grit plaster on exterior walls in two layers,under layer 12mm cement plaster 1:4 (1 cement :4 coarse sand) furrowing the under layer with scratching tool,applying cement slurry on the under layer @ 3 Kg of cement per square metre,top layer 15mm cement plaster using white cement in the top layer of the item of washed Marbal stone chipping grit plaster 1:1/2:2(1 White Cement:1/2 coarse sand:2 Marbal stone chipping 10mm nominal size) including pigment(colour) to be added as per approved by Engr-in-Charge in panels with groove all around as per approved pattern including scrubbing and washing,the top layer with brushes and water to expose the stone chippings complete all as specified and directed by Engr-in Charge (Payment for providing grooves shall be made separately).

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens,nailed to the under layer including removalof wooden battens,repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-Charge.

M&L for framed work such as gate(any size), grills,gratings,etc with ends of bars shouldered and/or riveted,or forged into spikes framed guard bars barred iron doors ladders framed balusters,walk ways,railing,framework of water tank and similar work con-forming to Fe.290.Gde-E-165.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition (reinforced) cement concrete of any description and in any position complete all as specified and as directed.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.

- ditto - all as per above item No.17 but 6 to 8 mm dia as in stirrups.

M&L for formwork to sides of pillars, posts, struts, piers, columns and sanchions complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) of 1:2:4 type B-1 (20mm graded aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for 20 mm thick granite ( of any type ) work (table rounded and polished) in colomn, jambs, brick pillars, over 15mm thick rendering in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixer of pigment to match with shade of granite complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded agg) in kerbs , rounded or chamfered on edges, copings, kneelers, apex stones, bed plates like including weathering, slightly rounded including necessary form work and including demolition of old loose PCC coping complete all as specified and as directed.

Dismantling posts or struts (steel or RCC) any section, embedded in cement concrete including taking out embedded portion of posts or struts and making good disturbed ground complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

M&L for cement concrete 1:3:6 (40 mm graded stone aggregate) in foundation filling, fixing post hole and mass concrete etc including necessary formwork as ordered complete all as specified and directed.

M&L for mild steel works such as post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, including all necessary drilling bolting or riverting etc and similar work, conforming to Fe-290,Gde-E-165, complete all as specified and directed.

M&L mild steel round bars 10mm dia (Fe-410-W Gde E-250) quality- A or Fe 290 (gde E-165) and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Dismantling fencing wire mesh of any descripition, complete all as specified and directed.

Supply only chain link fencing 100x100mm mesh with 4.00mm dia mild steel galvanised wire, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standerds, rails, straining bolts etc including provision of mild steel binding wire (annealed) not less than 0.90mm dia, complete all as specified and as directed.

S&F of galvanised 2 stand steel barbed wire 2.24mm dia barbed with 2mm dia at barbs 75mm spacing and strainings and fixed to any type of standard rails staning bolts including securing or tying at crossing with provision of GI mid steel wire, staples or steel pins etc, (each line wire to be measured) including dismatling old barbed wire of any type and any size, complete all as specified and as directed.

M&L for mild steel screw bolts (machine made) 5.00mm to 10.00mm diameter of neck and length of bolt exc 5.0 cm and n.exc 10cm with hexagonal or square heads at one end and screwed the other end, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, complete all as specified.

S&F in repair concertina coil fencing with punched tape concertina coil 600mm dia 10 mtr openable length having 50 Nos rounds per 6 mtr length , spring core wire ( 2.5mm thick) of high tensile strength of 165 Kg/Sqm with tape (0.52 mm thick and weight 43.478 gm/metre and fixing the same with existing Y shape Angle iron with 6 horizontal R.B.T ( Reinforced Barbed Tape) wire, stud tied with GI Staple sand GI clips to retain horizontal all complete as per direction of Engineer-in-Charge

M&L for applying two coat of synthetic enamel paint on new steel surfaces of any description n.exc 10 cm width or girth including preparation of surfaces, complete all as specified and directed.

M/S GEETANJALI ENTERPRISES (BID ID -3093965)

SURESH KUMAR SHARMA & CO (BID ID -3081988)

M/s ALFA STRUCTURE (BID ID -3080610)

B. S BUILDERS (BID ID -3076595)

HARICHAND CONSTRUCTION (BID ID -3086555)

M/S MSD & Associate (BID ID -3092427)