15th FINANCE SCHEME 2025-2026 TIED GRANT - II INSTALLMENT

Amount

Geophysical investigation Charges

Supplying of 150mm ODPVC casing pipe including transportation Charges etc.,

Drilling of 150mm dia Borewell in Hard rock area including 180mm dia pilot bore and labour charges for insertion of casing pipe in the drilled hole etc.,

Construction of Masonry Pedestal for Kiosk with a size of 1.20 x 0.45 x 1.95m including material cost etc.,Earthwork Excavation and depositing on banks with initial lead of 10 mm and lift of 2m in all classes of soils as per 20B foundation Etc., Complete.( 1.20x0.45x0.30)Plain CC 1:5:10 mix using 40mm metal from approved Quarry including cost of materials. conveyance charges and all labour charges etc., completed. ( 1.20x0.45x0.10)Brick work in cm 1:5 mix using country brick of size 8.3/4" x 21/4" from approved quarry including cost materials, conveyance charges and all labour charges etc., complete.( 1.20x0.45x1.95)Plastering with cm 1:5 mix, 12 mm thick including cost and conveyance charges and all labour charges etc., complete.,Supply and Delivery of MS Steel door size of 1.20 x 0.45M for fixing of meter board. Switch board arrangements and fixing of street light fittings with 32 mm GI Pipe post.Painting Two coats with approved cement paint over one coat is priming over the cement plastered exposed surface etc., complete and as directed by the officers.,

Construction of Masonry pedestal 1.50 m Height from the ground level for erecting the HDPE Tank Earthwork Excavation and depositing on banks with initial lead of 10 mm and lift of 2m in all classes of soils as per 20B foundation Etc., Complete.( 22/28 X 2.5x0.30) Plain CC 1:5:10 mix using 40mm metal from approved Quarry including cost of materials. conveyance charges and all labour charges etc., completed. ( 22/28 X 2.27 x2.27x0.30) rick work in cm 1:5 mix using country brick of size 8.3/4" x 41/4" x 21/4" from approved quarry including cost materials, conveyance charges and all labour charges etc., complete., Foundation( 22/28 X 2.385 x0.115x0.30) Parapet ( 22/27 X 2.385 x0.115x0.30) Pedestal ( 22/28 X 1.30 x0.60x0.80) .For Embedment of HDPE Tank (22/28 X 1.30 x0.60x0.80)Plastering with cm 1:5 mix, 12 mm thick including cost and conveyance charges and all labour charges etc., complete.,HDPE Tank including loading and Transportation Including Fixing and including necessary GI Piper and specials for pipe connection works including cutting, Threading and fixing charges as directed by TWAD BoardPainting Two coats with approved cement paint over one coat is priming over the cement plastered exposed surface etc., complete and as directed by the officers.,Painting The name Board and Emblem of alogans in accordance with size and specification as approved by the board of HDPE tank

Construction of socket pit for mini power pump scheme as per the standard specification etc.,Earthwork Excavation and depositing on banks with initial lead of 10 mm and lift of 2m in all classes of soils as per 20B foundation Etc., Complete.Plain CC 1:5:10 mix using 40mm metal from approved Quarry including cost of materials. conveyance charges and all labour charges etc., completed. ( 1.50x0.32x0.10)Brick work in cm 1:5 mix using country brick of size 8.3/4" x 41/4" x 21/4" from approved quarry including cost materials, conveyance charges and all labour charges etc., complete.,( 2x 1.50x0.11x0.08)Supply and Filling of 40 mm HBG Stone as per specification (22/28x1x0.01)Supply and Filling of Sand Plastering with cm 1:5 mix, 12 mm thick including cost and conveyance charges and all labour charges etc., complete. etc complete.,

Supply and delivery of single phase pumpset with motor as per ISI 50 LPM x 60m head including panel board consist of following Relay with ISI mark, Contact UNIT ISI mark,Condenser ISI mark,olt meter and Ammeter suitable for the above pump etc., complete.

Supply and Delivery of HDPE tank 1000 lit capacity of approved quality including all cost of materials at site etc.,

Supply and delivery of following GI pipes and Specials confarming to IS 554/86 for GI pipes IS 123/1990 part I required for pump set creation

65mm UPVC Pipe

Supply and fixing of 32 mm Gi union

Supply and fixing of 32 mm L Bow

Supply and fixing of 32 mm PVC Copling

Supply and fixing of 32 mm PVC Pipe

Supply and fixing of 25 mm Tap

Supply and fixing of 2.5 sqmm Cable

Supply and fixing of Run of 2 x 2.5sqmm Cable

Supply and fixing of Earthing etc,complete,

Supply and fixing of 16 AMPS fuce unit with meater board etc complete

Supply and fixing of 16 AMPS DP Switch with metal clad etc complete

Labour Charges for Erection of pump set in the deep bore well including connection of submercible cable etc.,

Earthwork excavation for open excavation and depositing on Bank within initial lead of 10mt and initial lift of 2mt in hard stiff clay ,stiff black cotton hard red earth shales murrams gravel stoney earth and earth mixed with small size boulders and hard gravelly soil except rock etc., complete complying with standard specification.As per SS 20 B TNDSS NO 23&24 VI (S2 ),VII 9,10

Supplying and delivery of unplasticideHDPE pipes for portable water supply pipeline with PN6 grade and the rate including the cost and conveyance of all materials with loading and unloading charges and all other incidential charges and labour charges etc. complete as per standard specifications and as directed by departmental Engineers

Lowering HDPE pipes and specials to trench and laying to proper grade and alignment and as directed by the TWAD Officers and the rete including cost and Conveyance of all materials to site and all labour charges for filling etc., Complete. complying with standard specification.

Jointing HDPE Pipes and Specials by butt fusion welding / electro fusion welding joints using fusion equipment as per ISO 21307-2011 and as per IS 7634 (part-2) : 2012 including cost of hire charges for butt fusion equipment power supply arrangements etc., complete as per directed by departmental Engineers

V.JANARTHANAN (BID ID -1464263)