SPECIAL REPAIR TO BLDG NO P105 AND P 8 507 AND OTHER SANCTIONED WORK AT AGE BR II AREA UNDER GE PANAGARH

Amount

Surface excavation n.exc 30 cm deep and and average 15 cm deep and getting out soft and loose soil complete all as specified and directed.

Surface excavation n.exc 30 cm deep and and average 15 cm deep and getting out hard/dense soil complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m deep for foundation etc or for shafts n.ecx 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

All as per Item No 3.00 here-in-above but hard/ dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth, watering, and removing surplus soil n exc 50 m and making good surface in hard/dense soil complete all as specified and directed.

M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M & L for broken bricks hard core gauge n.exc 63mm deposited, spred and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified and directed.

M & L for broken stone hard core gauge n.exc 63mm deposited, spred and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in bed concrete for foundation filling & mass concrete complete all as specified and directed.

M & L PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in roof kerbs or mud stop rounded complete all as specified and directed.

M & L PCC (1:2:4) type B-0 (using 12.5mm grade stone aggregate) as in caping, plinth course padding for levelling course of roof etc bed blocks for hold fast including necesssary formwork complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as specified and directed.

M & L for reinforced cement concrete type B-0 1:2:4 (12.5mm graded aggregate) such as cover slab and similar work complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (using 20mm graded stone aggregate) as in columns, pillars, post, piers and struts etc complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

Demolition/dismantling of brick work built in cement mortar or stone masonary including all quoins, arches pillars etc and removing unserviceable material exc 100 mtr complete all as specified and directed.

M & L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M & L for brick work fly ash bricks,straight or curved on plan to any radius in half brick thk wall, built in cement mortar (1:4) complete all as specified and directed.

M&L for brick work using old size bricks (except bricks) straight or curved on plan exceeding 6 Mtrs mean radius built in CM 1:6 complete all as specified and direcetd.

M & L cutting holes in brick walls exc half brick but n. exc one brick for inserting holdfasts and making good dismantaled portion in cement mortar (1:4) or cement concrete 1:2:4 type B-1 built in cement mortar complete all as specified and directed.

M & L for damp proof course 40mm thick in cement concrete (1:2:4) type B-0 to horizontal or vertical surfaces including necessary form work complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed.

Use and waste for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for rough finished surface, not exceeding 200m thick (horizontal or sloping) complete all as specified and directed.

Use and waste of formwork to soffits of floor or roof beams, beam haunching, grider, bressumber, lintels,cantilever ,sleves including supports ,over hang etc also splay between floor and beams to rough finish surface of concrete flat complete all as specified and directed.

S & F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.

S & F glazed and gauged Skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20, and shop coat of pink primer complete all as specified and directed.

S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, including 1st clas Hwbeading alround polished complete all as specified and directed.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed.

All as per item No 32.00 above but size of chowkhats or frame not exceeding 1.5 Sq. m each with shutter(s) (without taking off shutters from the frame) complete all as specified and directed.

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F factory made solid PVC moulded door shutter, 28 to 30mm thick (styles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S & F Aluminium, anodized barrel tower bolts of extruded section and fixed, 150 mm long, dia of bolt not less than 10 mm, ISI marked complete all as specified and directed.

S & F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed.

S & F aluminium alloy anodised barrel tower bolt 100mm long complete all as specified and directed.

S& F aluminium alloy anodied sliding door bolt size 300 mm with hasp staplw (bolt type ) and fifing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extrueded section or cast aluminium alloy and fixed complete all as specified and directed.

S & F hat and coat hooks, soild body aluminium 175 mm to 250 mm fixed to wall with screws and rawl plugs, fixed complete all as specified and directed.

S & F for 40mm dia brass, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, polished fixed etc complete all as specified and directed.

S & F 100 mm long hasp and staple, aluminium anodized with bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F in repair aluminium curtain rods 25 mm dia decorative type with a pair of brackets, powder coated of approved pattern and colour complete all as specified and directed.

S & F stainles steel tubular towel rail /towel ring 20mm dia D type and 60cm long between flanges of brass chromium plated complete all as specified and directed.

M & L in repair double leg aluminium anodised door stopper with rubber foot, ISI marked and fixed with standard aluminum screws complete all as specified and directed.

S & F in repair hydraulic door closer aluminium extruded section body desiganation No-3 universal type, suitable door shutter width and weight between 61kg to 80kg of approved make, fixed with screws, complete all as specified and directed by Engr-in -Charge.

S & F 100 mm size cold rolled mild steel butt hinges complete all as specified and directed.

S & F in repairs Galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S & F in repair continouous (piano) hinges, brass, bright finish or electro galvanised width of flaps 30mm (when open) fixed complete all as specified and directed.

S & F aluminium handles, fabricated type, anodised 150mm long complete all as specified and directed.

S & F extruded aluminium alloy handle fabricated type anodized 100mm long complete all as specified and directed.

S& F in repair Aluminium alloy wire mesh, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium beads complete all as specified and directed.

S & F mild steel flat iron hold fast inserted in brick wall etc small article complete all as specified and directed.

M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per Item No 54.00 here-in-above but 6 to 8 mm dia.

S & F rolled mild steel structural steel work as in tubular roof trusses (framed), trussed, purlin, crane grantries, rails and fasterning and heave bracket framing (beam,tee,angle, channel or flat sections) including distance pieces, cleats etc incl necessary welding, riveting, bolting confirming to Fe-410 (Gde E-250) quality 'A' complete all as specified and directed.

S & F steel work in tubular/rectangular roof trusses including special shaped washer etc. complete using ERW or induction butt welded tubes including one shop coat of zine cromate primer(including prepration of surface) conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

S & F anodised Aluminium frame for doors, sliding windows & ventilators (moveable louvers type) with one or more rebates including joining cleat for fixing etc. Rubber gasketing all round the panels/ shutters to fix glass, PVC gasketing in all channels, locking arrangement, (minimum thickness of powder coating 50micron) complete all as specified and directed.

S&F for aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, rubber neoprene packing, handle 02 Nos in each door hinges anodised aluminium snap beading screw etc complete all as specified (minimum thickness of powder coating 50 micron) complete all as specified.

S & F for aluminium window and ventilator shutters ,fixed type without sah bar , aluminium section weighing 0.55 kg/m including necessary joining cleats , glazing clips , rubber packing, anodised aluminium snap beading screw etc complete all as specified and directed. (minimum thickness of powder coating 50micron complete all as specified.)

S & F steel ventilators with centre hung shutter including hinges, steel peg stay, complete all as specified and directed.

Dismantling of ceilling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, of any thickness including cover fillets complete all as specified and directed.

S & F for anodised aluminium snap grid frame work for false ceiling (size of grid 605 x 605 mm) fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fastners 12.5mm dia, 40 mm long complete all as specified and directed.

M & L hanger 6mm dia G.I (upto 1200 mm length) adjusted level fixed to roof slabs by means of ceilling cleat made out of GI flat 40x3 mm size 60mm long and expansion hold fastener 12.5 mm dia 40 mm long complete all as specified and directed.

S & F 8mm thick 'E' board (non asbestos fiber) plain building boards fixed in aluminium frame work in ceilling flat or sloping with screw complete all as specified and directed.

S & F Pre - Painted galvanized aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L 0.90mm thick decorative laminates type-1 of surface finish, colour and pattern as aproved, fixed with adhesive as per manufacture's instruction complete all as specified.

Dismantling timber fillets, rail, posts, rafters, purlins, etc under 40 sqcm in section (framed work) as in studs complete all as specified and directed.

Dismantling of boarding, any description, fixed in any position with nails complete all as specified and directed.

M & L for 2nd class hard wood plain fillets,square,rectangular, or triangular in section clean sawn, secured with nails, cross sectional area exc 6 & n.exc 13 sq.cm complete all as specified and directed.

M & L for Veneered decorative plywood 12 mm thick, grade I (with BWR resistance) with decorative one face veneer fixed with nails complete all as specified and directed.

Demolition of cement concrete (un-reinforced) roofs surfaces of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for 100 mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.

M & L for 75 mm thick PCC type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection, footpath and hardstanding finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for 100 mm thick cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in flooring laid in alternative bays finishing the surfaces even and smooth with using extra cement complete all as specified and directed.

S & F 38 mm wide and 3 mm thick glass dividing strips as in flooring and inserted in position conform to design complete all as specified and directed.

M & L 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in subbase of floor to received tiles and finishing even and fair without using extra cement complete all as specified and directed.

M & L for roughening the existing PCC floor by picking/chieseling/sweeping and cleaning the entire surface and brushing neat cement slurry @ 3.00Kg per Sqm complete all as specified and directed.

M & L glazed coloured ceramic tiles 300 x 200 x 7 mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry painted in coloured cement to match the existing surfaces over and including rendering 10 mm thick in cement mortar (1:4) on brick or concrete surfaces complete all as specified and directed.

M & L Glazed coloured joint free ceramic tiles of size 350 x 250 x 7mm/450 X 600 X 7mm thick quality not less than group-II, straight edge, k, as on skirting, dados, walls etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:6 complete all as specified and directed.

M & L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surfaces over and including screed bed or bedding layer 15 mm thick in cement mortar (1:6) complete all as specified and directed.

M & L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. over and including screed bed or bedding layer 15 mm thick in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per Item No 82.00 here-in-abovebut on vertical surfaces including 10mm thick rendering in CM 1:4 complete all as specified.

M&L coloured ceramic designer tiles & size of 300 x 450 x 7mm to 8mm thick superior quality (as aproved by GE) laid on vertical surface such as dado/skirting over and including cement mortar 1:4, 10mm thick backing coat set jointed in neat cement slurry and pointed in white or coloured cement complete all as specified.

M&L coloured ceramic tiles border joint free & size of 300 x 75 x 7mm to 8mm thick superior quality laid on vertical surface such as dado/skirting over and including rendering 10mm thick in cement mortar (1:4) as backing coat, set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified.

M&L coloured Virified Ceramic tiles 10 mm thick dark shade(square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and jointed in neat cement slurry over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified as directed. Note : Design, shade and pattern of fixing of tiles shall be as directed.

M & L for Vitrified Ceramic dark shade tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and jointed in neat cement slurry including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed. Note : Design, shade and pattern of fixing of tiles shall be as directed.

M & L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigments complete all as specified and directed.

M & L for Chequered Cement concrete tiles 25cm x 25cm x 20mm thick, set jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in cement mortar (1:4) with grey cement and pigment complete all as specified and directed.

M&L for providing Granite (of any type) as in cills, jambs, cooking platform etc cement screed laid over and including 20mm thick and jointed with gray cement slurry and pointed with admixture of pigment to match the shade of granite including grinding and polishing complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceble tiles to store and rubbish off the permises complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) below or above ground level and paving n. exc 15 cm thickness below or above GL complete all as specified and directed.

M&L for rendering over roof slab with CM 1:3, 10mm thick mixed with and including water proofing compound (liquid as per measurement) complete all as specified and directed.

M&L for providing AP based membrane course roof treatment in layers with following provisions:- (a) 20mm thick (average) screed bed of bedding layer in CM (1:6) and finished the surface even and smooth without using extra cement on top of the roof surface. (b) Applying one coat of bituminous primer, polymerized primer oil based coat, evenly @ 0.3 Kg/Sqm as priming coat to the prepared surfaces, till the surfaces is properly impregnated and the solvent oil in the based primer shall be allowed to evaporated completely. (c) Aplying AP based pre fabricated with non woven polyster reinforced membrane stabilised with fibre glass strands & top with grey mineral slates, not less than 3mm thick and not less than 3Kg/Sqm by torch aplication method.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water including removing rubbish etc. complete all as specified and directed.

M & L for rendering 15 mm thick in cement & sand mortar 1:6 (internally) on brick or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed.

M & L rendering 15 mm thick cement plaster in cement mortar (1:4) on external surfaces of brick/concrete work finished even and smooth (without using extra cement) mixed with WPC @ 3% by weight of cement complete all as specified and directed (WPC will be measured and paid separately).

M & L rendering 10mm thick cement & sand mortar (1:3) on concrete surfaces finished even and smooth without using extra cement on ceiling/pillar complete all as specified.

M&L for rendering 20mm thick in cement and sand mortar 1:4 in 2 coats (15mm thick backing coat and 5mm thick setting coat) mixed with water proofing compound @3% by weight of cement on fair faces of brick work or concrete surfaces finished plaster complete all as specified and directed. Note: WPC will be measured and paid seperately.

M & L for 3 mm thick wall care putty in wall complete all as specified and directed.

M & L for preparation new plastered wall surfaces and applying three coats of white washing complete all as specified and directed.

M & L for preparation new plastered surfaces and applying three coats of white washing on ceiling complete all as specified and directed.

M & L for two coats of oil bound distemper on newly wall surface including chalk whiting including prepration of surfaces complete all as specified and directed.

M & L for two coats of oil bound distemper on old wall surface including chalk whiting, prepration to distempering including complete removal of existing surfaces complete all as specified and directed.

M & L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance complete all as specified and directed.

M & L for preparation of old plastered or un-plastered surface of walls and aplying two coats of cement base paint complete all as directed.

M & L for washing, rubing down and stoping of old distempered on ceiling surfaces including brooming down or steel wire brushing scrapping down smoke soot, moulds moss and efforescent salt complete removal of existing treatment of surface and providing 3mm thick wall care putty & aplying two coats of oil bounded distempter over chalk whiting/primer complete all as specified and directed.

M & L for complete removal/scrapping of existing treatment of plastered surfaces and applying one coat of primer over a layer of 3mm thick wall care putty and two coats of oil bound distemper complete all as specified and directed.

M&L for complete removal of existing treatment on wall plaster old surface providing 3mm thick wall care putty & applying two coat of weather proof acrylic emusion paint, exterior grade over a coat of primer complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq.m in each pane fixed to aluminium window/ ventilators etc complete all as specified and directed.

S&F 4 mm thick glass sheet one side frosted ordinary quality and glazing in square n. exc 0.50 sqm in each pane fixed to aluminium windows/ventilator complete all as specified and directed.

S&F 10mm thick toughned glass with diamond cut edge for door shutters and partition wall fixed over floor spring including with pivot assembly and necessary locking arrangement with all fittings such as door handles both sides, hinges, clamps with necessary embrosement as required complete all as specified.

S & F Solar control film 50 micron relfective type sticked to glass panes as per instructions of manufacturer's complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wood surfaces of any description not other wise described over 10 cm with or girth complete all as specified and directed.

M & L for preparation of new iron/steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint on old surfaces over & including a coat of red oxide primer over steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore complete all as specified and directed.

S & F 15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified and directed.

S & F 20 mm dia galvanized pipes medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S & F 50 mm bore (LDPE) Low density polythene pipes of dia of pressure rating 6 Kgf/cm2 fixed complete to walls, ceiling or in floor etc complete all as specified and directed.

S & F of 500 ltrs capacity rotational moulded polyethylene water storage tank (Cylendrical, vertical with closed top with double layer conforming to IS-12701-96 complete including provision of all inlet, outlet, overflow and drain pipe fitting complete all as specified and directed.

Supply & fixing 1000 litres capacity rotational moulded polyethylene water storage tanks multi layer (cylindrical vertical with closed top with double layer) conforming to IS-12701-96 complete including provision of all inlet, outlet, overflow and drain pipe and fittings complete all as specified and directed.

S & F bib tap long body with CP nipple cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore complete all as specified and directed.

S & F in repair 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed.

S & F CP Stop/angle valve, any description, suitable for 15mm bore pipe complete all as specified and directed.

S & F in repair concealed stop valve /angle valve cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe complete all as specified and directed.

Taking down CI pipe/AC, PVC pipe with fittings of any dia fixed to walls complete all as specified and directed.

S & F Gun-metal ball valve (quarter turn type) with MS lever handle, suitable for GI tubes 15 mm bore (ISI marked) with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

M & L for 20mm bore PTMT float valve with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 140gms), fixed compete all as specified and directed.

S & F PTMT shelf 450 mm x 124 mm any colour with brass chromium plated screws & PVC rawl plugs (Minimum weight 300 gm) complete all as specified and directed.

S & F waste coupling of PTMT for WHB any colour half or full threaded suitable for 32 mm size discharge pipe (minimum weight 45gm) complete all as specified.

S & F grating 100 mm dia with or without hole of PTMT (Minimum weight 40 gm) and fitting of shade matching to tiles/floor, fixed with white cement including matching shade pigment, complete all as specified and directed.

S & F Towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F stainless steel towel ring dia 150mm aproved make & pattern fixed to works with screws complete all as specified and directed.

S & F CI/Soil waste pipe 100mm dia sand cast iron any length with or without ears with cement joint fixid to wall complete all as specified and directed.

S & F CI/Soil waste pipe 75mm dia sand cast iron any length with or without ears with cement joint fixid to wall complete all as specified and directed.

S & F Cast iron bends (any radius), diminishing pieces or tapers (largrer bore measured), suitable for 100 mm bore spun pipes, ISI marked complete all as specified and directed.

S & F Cast iron bends (any radius), diminishing pieces or tapers (largrer bore measured), suitable for 75 mm bore spun pipes, ISI marked complete all as specified and directed.

S & F 110mm bore PVC (SWR) pipe single socketed, in any length laid in trenches complete all as specified and directed.

S&F PVC (SWR) bends of 110 mm bore complete all as specified and directed.

S&F Jet Spray CP cast copper alloy fancy type having PVC tube 750mm long SS nut bolts at either ends of aproved make complete all as directed.

S&F 100mm cast iron sanitary connection socket to fit WC out-let complete all as directed.

S&F Stainless Steel Soap disch fancy type complete all as specified and directed.

S&F toilet paper holder CP fixed to walls with brass screws complete all as specified.

S&F in repairs PVC sheet cabinet, made out 5mm thick sheet with openable shutter and mirror of thickness not less than 2mm with suitable compartment in side as directed of size 450mm x 350mm x 120mm fixed to wal chromium plated brass screws complete all as specified.

S&F in repair wall mixer with connector for hand shower arrangement with connecting legs wall flanges and bracket for hand shower with all accessory complete all as specified.

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

M&L cement concrete bed to 150mm dia drain pipes including packing under and hunching against the sides of pipes after they are laid and tested in cement concrete (1:3:6) type C2 (40mm graded stone aggregate) complete all as specified.

M & L cement concrete bed to 200 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (40mm graded stone aggregate) complete all as specified and directed.

M & L reinforced concrete pipes, class NP2, 150mm internal dia laid in trenches on concrete bed and jointed complete all as specified and directed. Note:- Excavation earth work concrete bed and haunching shall be measured and paid separately.

M & L reinforced concrete drain pipes, class NP2, 200mm internal dia laid in trenches on concrete bed and jointed complete all as specified and directed. Note:- Excavation earth work concrete bed and haunching shall be measured and paid separately.

S & F toilet paper holder, vitreous china box type fixed to wall with chromium placed brass screws complete all as specified and directed.

S &F in repair Vitreous china Water closet (pedestal pattern) white with P or S trap including plastic WC seat & cover mild steel chromium plated or aluminised hinging device and jet, flushing cistern low or high level, 32 mm dia polyethylene flush pipe etc complete all as specified and directed.

S & F Vitreous China urinal flat black, size of 465 x 355 x 265mm white (minimum), with grating and union for discharge pipe (back to corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed. Note: Exclusive of fixing supply pipe to flushingcistern, trap and waste pipe.

S & F vitreous china squatting pan Orrisa pattern of size 580 x 440mm white with intergal footrest, excluding flusing cistern & flush pipe fixed 'P' or 'S' trap complete all as specified and directed.

S&F PVC low level flushing cistern, low level, white (to match the EWC/IWC) including brackets 10 Ltr capacity with inlet ball valve float, handle, flush pipe etc complete all as specified.

S & F wash hand basin vitreous china white (flat back) of size 550x400mm including bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified and directed.

S & F Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes complete all as specified and directed.

S & F waste pipe 32mm dia complete all as specified and directed.

S & F in repair sink made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420mm bowl size 430mm x 380mm x 203 mm complete all as specified and directed.

S&F in repair plate rack of stain less steel of size 24" x 30" x 10" deep of aproval design and make, made of steel sheet 1.00mm thick fixed to wall with screw and hold fastener complete all as specified.

M&L for CI floor trap/Nahani trap 100mm dia with CI grating including jointing to waste pipe in PCC (1:2:4) type B-1 as directed in run lead complete all as specified.

S & F salt glazed stone ware gully trap of size 150 x 100mm square or rounded mouthed complete all as specified and directed.

S & F stainless steel Swivel shower arm 15 mm size, 195mm long with bend 45 degree with flanged fixing with 15mm bore pipe (Minimum weight 40gms) complete all as specified and directed.

S&F decorative corner glass shelf round 6mm thick, 200mm size with railing 225mm high in bathroom, fixed with 'D' type bracket on wall of approved and pattern complete al as specified.

S&F in repair CP mixer long body for mixing hot and cold water to fix in kitchen sink screwed down iron pipe and fixed complete all as specified.

M&L for cement concrete type B0 1:2:4 (12.5mm graded aggregate) in padding for levelling course of roof, rounded or chamfer edge sloping, coving all around at the junction of parapet and the roof slab etc concrete mixed with water proofing compound complete all as specified (WPC measured and paid seperately)

Dismantling plain or corrugated steel sheet or galvanised sheet in roof any gauge gauge, any thickness complete all as specified and directed.

Dismantling steel work of any description complete all as specified and directed.

Demolition of reinforced cement concrete any thickness complete all as specified and directed.

Demolition and breaking up drain pipe (SGSW/PVC/RCC etc) set in cement mortar of internal dia of pipe 150 mm complete all as specified and directed.

M & L for machine cut kota stone slab flooring 20-25 mm thick over 15 mm thick screed bed in cement mortat 1:6 jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.

Material and labour concealed type point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including Modular pressed steel terminal switch boxes of diffrent module and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FR PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

All as per item No 177 above but One 3 pin 5 Amps socket out let points on independent board

All as per item No 177 above but 5 Amp socket on same board with other switches.

Material and labour concealed type point wiring for 15 Amps socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including Modular pressed steel terminal switch boxes of diffrent module and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified.

Supply and fixed Modular switch 1 way 5/6 A, 1 module complete all as specified.

Supply and fixed Modular socket 6 A -2/3 pin combined, 2 Module complete all as specified.

Supply and fixed Modular Switch socket Combination 16A, 6 pin, 3 module complete all as specified.

Supply and fixed Modular Fan stepped regulator, 120 W, 2 Module complete all as specified

Supply and fixed Modular white cover plate with frame 2 module complete all as specified.

Supply and fixed Modular white cover plate with frame 3 module complete all as specified.

Supply and fixed Modular white cover plate with frame 4 module complete all as specified.

Supply and fixed Modular white cover plate with frame 6 module complete all as specified.

Supply and fixed Modular white cover plate with frame 8 module complete all as specified.

Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

Supply & fixed Bell push , flush type , 5 amp complete all as specified.

Supply & fixed Buzzer, Ding dong, AC 230 Volts, single pole 230 volts all as specified and directed.

Supply & fixed lamp holder, PVC/polycarbonate type with back plate straight or anfular suitable for batten fittings complete all as specified.

Supply & fixed in repair for Modular type 20 Amps power unit combine with on/off switch enclosure single pole and neutral with two pin and earth socket complete all as specified and directed.

Material and labour surface type point wiring for light point/ fan point one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FR cables in and including suitable size PVC casing and caping (ISI marked) , including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FR PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

All as per item No 195.00 above but 5 Amp soicket on same board with other switches

Supply and fixed switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.

S&F socket outlets 2 in 1, 5/6 Amps, 230/240 V complete all as specified and as directed.

Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

Supply & fixed lamp holder, PVC/polycarbonate type with back plate straight or anfular suitable for batten fittings complete all as specified.

Taking down existing unservicebale service main / sub main wiring complete all as specified from electric poles to service brackets, wall etc. including removing of unserviceable wiring complete all as specified.

Supplying and fixing two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked), concealed, including 2.5 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified.

Supplying and fixing two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked), concealed, including 4 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified.

Supply and fixed in repair security light fittings 25 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed.

Supply and fixed in repair 20 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 20 watt,6000K including necessary connection complete all as specified and directed.

S&F in repair recessed mounted 2' x 2 Ft LED lumanaire 42 Watts for grid celing minimum lumen output 100 lumen/watt, pre-treated CRCA frame powder coated with diffused profied including necessary connection complete all as specified and directed.

S&F 01 x 18W LED fittings decorative ultra slim linear LED lighting fixture with extruded polycarbonate complete with all accessories and connection from ceiling rose with twin core twisted flexible coper conductor cable with suitable size and earthing complete all as specified and directed.

S&F 01 x 25W LED fittings with pressure die cast aluminium housing complete with heat resistant glass suitable for pole dia 25mm complete with all acessories including connected with twin core twisted flexible coper conductor of suitable size including GI bracket of 25mm dia light grade pipe including fixing arrangements complete all as specified and directed.

Supply and fixed in repair 9 W LED light fitting wall mounted batten 2ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 9 watt , 6000K including necessary connection complete all as specified and directed.

Supply and fixed in repair Surface mounted type decorative light fitting 1 x 12W LED 6k 230V AC, 50Hz complete with all accessories complete all as specified and directed.

Supply and fixed in repair street light bracket made out of GI pipe light grade 25 mm dia 1.5 mtr long bent to required shape as directed and fixed to pole complete with painting and including two set of 20x3mm FI clamps and fixing arrangement such as nuts, bolts and washers complete in all respect or as specified and as directed.

Supply and fixed Vertical distribution board double door TPN 8 way with IP 54 galazed door multiphase outgoing suitable for mounting 100 Amps as incomer with Bus bars, Neutral links complete with all accessories complete all as directed.

Supply and fixed in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

Supply and fixed in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

Supply and fixed in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

Supply and fixing MCCB of 4 pole , 415volts of capacity 100 Amps with breaking capacity of 16 KA Fixed thermal and fixed magnetic setting including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCCB are included in unit rate of each MCCB of any rating).

Supply and fixed in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs MCB TPN 40 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs MCB TPN 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I including testing after dismantling of old earthing complete all as specified and directed. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

Supply and fixed 4 mm dia GI earth lead with clamp, connection complete all as specified and directed.

Supply & fixing in replacement of ceiling fan 1200mm size , star 5 rated, ISI mark, 240V, 50 Hz all as specified and directed.

S&F ventilating exhaust fan metal type 230mm sweep 230 Volt AC complete with louvre and all acessories including cutting hole of suitable size, making good surface by doing plaster and aplying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible coper conductor (23/.0076) of suitable size complete all as specified and directed.

Supply & fixing in repair PVC Exhaust ventilation fan of sweep 250 mm sweep, 230volt AC complete with louver and all asssesories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing connected with rwin core twisted flexible copper conductor (23/0.0076) of size complete all as directed by Engr-in-Charge.

Supply, laying/fixing/connecting, testing and commissioning of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of cross sectional area 6 Sqmm 2 core including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings/walls without cable duct) after taking out old burned cable complete all as directed for the following ratings. Note:- (i) Earthwork,sand cushioning,brick will be measured and paid separtely.

All as per item No 226.00 above, but cross sectional area 16 Sqmm 4 core.

All as per item No 226.00 above, but cross sectional area 25 Sqmm x 3.5 core.

Supply and laying for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and directed. (Note : Punned thickness shall be measured).

Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed by the Engr-in-Charge.

Supply and fixing Single phase KWH meter (Energy meter) with LCD Display, Range 10-60A with optical port+Box, Model EM101+Class 1Base mounting.

Supply & fixing Junction box wheather proof in IP-67 accordance with made of thermoplastic of size 155mm x 210 mm x 92 mm complete with front openable hinged cover and locking arrangements with IP 67 degree of protection complete with electrical connection fixed to pole with suitable size FI clamp nut bolts and washer including duly painted of flat iron clamp with synthetic enemal paint (1st quality) complete all as specified and directed.

M & L for parallal boring under roads in conventional method without disturbing the top surface of the road for passing of cable protection pipe etc complete all as specified and directed.

S&F in replacement Pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified.

Supply & fixing LED garden light of 9 watt bollard in decorative mushroom shape with IP 65 Protectioncomplte with all accessories all as specified and directed.

S&F in repair of down rod heavy duty 20mm dia for hanging of ceiling fan and fixing complete including joist of suitable size, bolts & nuts, washers, 2 Nos ruber insulator including drilling hole complete all as specified and directed.

S&F in repair MS clamp made of flat iron size 25 x 6 mm including nuts, bolts and 'S' hook.

Deduct the total amount of credit against Sch 'A' Rs (-) 47,058.00/- (*) This amount is fixed and shall be deducted from the quoted amount of the bidder to arrive at contract sum.

BABY ENGINEERING ELECTRICAL MECHANICAL STORES

THE ASSOCIATED COMPANY

UNITED BUILDERS

MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP