MAINTENANCE OF DIVISIONAL OFFICE BUILDING AT LUCKNOW

Amount

Painting on inner walls with acrylic smooth silk paints after finishing by putty work including all labours and materials .

Finishing walls with premium acrylic smooth exterior paint with silicon additives of required shade old work ( 2 or more coat applied @ 1.43 ltr/ 10 sqm ) over existing cement paint surface ( apex ultima,weather coat all guard )

Painting two coat on old wooden surface over priming coat including cost of priming coat on steel and other metal surfaces upto 10cm width or girth or small articles not exceeding 0.10sqm in area whiste superior synthetic enamel such as Luxol 3,Higloss apcolite superlac,Deluxe specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stopping including cost of all materials labours tools and plants etc required for proper completion of the work.

Painting two coat on old iron work over priming coat including cost of priming coat on steel and other metal surfaces upto 10cm width or girth or small articles not exceeding 0.10sqm in area whiste superior synthetic enamel such as Luxol 3,Higloss apcolite superlac,Deluxe specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stopping including cost of all materials labours tools and plants etc required for proper completion of the work.

S/F of flush Doors conforming to I.S. 2020 Part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjusting of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally. (i) 32 mm thick

S/F of 100 mm dia P.V.C down pipe complete with rose heads bends etc. required for proper completion of work.

Fixing panes of glass with equal or equivalent ISI marked quality outty betc. of 4 mm thick

Dismantling existing plaster including disposal of refuse as direction by the Engineer-in-charge with in a distance of 60m (200ft).

12 mm Plaster in 1 : 4 Cement And Coarse Sand on Walls Including all labours, Materials T&P's etc.

12 mm Ceiling Plaster in 1 : 3 Cement And coarse Sand on Walls Including all labours, Materials T&P"s etc.

P/L "brick coba" 12mm thick laid with M-150 class brick bat coba 7.50cm thick with gap of 15 mm to each other, over 20mm thick base of cement motar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing copound in 1:4 cement and coarse sand motar finished smooth & top mashed flase square 30cm x 30cm and side wall parapet shall be mono tythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/O all material, labour,. T&P etc. complete for proper completion of work.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement: 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mmnominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.

Providing fire extinguisher of aluminium body flat Bottom powder fire extinguisher idle for use on class A,B and C fire risk ISI marked squeeze grip operation idle foreuse 9 PDP of capacity 9 kg.