REPAIRS/MAINT OF JOINERY, SANITARY WORK, TILING AND OTHER MISC WORK IN OFFRS MD/OTM ACCN AT FATEHGARH CANTT..

Amount

Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as soecified and directed.

M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and directed.

Dismantling of floor hearth or wall tiling any type including cement mortar bedding complete all as specified and directed.

M & L for vitrified ceramic light shade tiles 8-10mm thick (square or rectangular) polished area of each tile exc. 0.18 and not exc.0 .36 sqm in floor,skiritng etc. and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade complete laid over 15mm thick screed bed or bedding layer of mortar CM (1:6) complete all as specified and directed.

M&L for non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc. 0.11 sqm but n.exc. 0.18 sqm in floors coloured tiles etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc laid over 15mm thick screed bed or bedding layer of mortar CM (1:6) complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350 x 250 x 7 mm th/450 x 350 x 7 mm th thick as in vertical surfaces set and jointed in neat cement slurry and jointed or coloured cement to match etc laid over 10mm thick screed bed or bedding layer of mortar CM (1:6) complete all as specified and directed.

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar of any description complete all as specified and directed.

M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement all as specified and directed

M & L for 15mm thick rendering or brick work or concrete surface in cm 1:4 finished even & smooth w/o using extra cement all as specified.

M&L 5mm thick cement plastering in CM (1:3) on ceiling surfaces even and smooth without using extra cement complete all as specified

Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats ) including making good of distrubed surfaces to match with the existing surfaces as before complete all as specified and directed.

-ditto- all as per item ser No above but exc 1.50sqm but n.exc 4Sqm…ditto….

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: Stainless steel butt hinges shall be paid separately)

S&F for Steel ventilators , fixed type, complete with glazing bars/gauzed portion dovetailed or welded etc complete all as specified and directed.

S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded etc complete all as specified and directed.

S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with-out glazing bars , dovetailed or welded etc complete all as specified and directed.

S & F MS work as in window guard bars, plain, let in and fixed independently in wooden frames etc, and similar articles conforming to Fe 290 Gde E 165 complete all as specified and directed

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm, modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately)

S&F Factory made solid panel PVC wiremesh door shutter 30 mm thick (style) wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree) used instead of exposed portion of PVC sheet beading ,wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmlyconsisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S & F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, welded tinned tacks,rivets,wooden beads etc. to steel windows/wodden doors/windows complete all as specified and directed.

S & F in Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, welded tinned tacks,rivets,wooden beads etc. to steel windows/wodden doors/windows complete all as specified and directed.

S&F Aluminium anodized barel tower bolt of extruded sec 150mm long complete all as specified and directed.

S&F aluminium alloy handle cast type anodized of size 100mm long complete all as specified and directed.

S&F stainless steel butt hinges med weight cold rolled 100mm size fixed with stainless steel screws complete all as specified and directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S & F 300 mm ordinary rat rail made of MS rod pattern spring including roller and roller plate complete all as specified and directed.

S & F in repair Harrison rails, mild steel, chromium plated with fixing brackets,stops, rollers etc complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty of fixed with beads complete all as specified and directed.

S & F 3 mm thick sheet glass, ordinary quality and glazing with mitred beads or oil putty including glazing clips in square not exc 0.50 sqm in each pane complete all as specified and directed.

S&F in repair door seal with brush complete all as specified as directed

S & F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connection union to pipe overall size 914 mm x 460 mm ,bowl size 405 mm x 354 mm complete all as specified and directed.

S & F in repairs Stainless steel kitchen plate rack 900mm x 600mm and made out of 1 mm thick stainless steel sheet complete all as directed by Engr in Charge.

S&F in repairs chromium plated grating doom 100mm dia with or without waste hole etc complete all as specified and directed.

S&F in repairs CP brass Health Faucet with flexible pipe 1.00 m tube and hook fixed for EWC suitable for 15mm bore of pipe etc complete all as specified and directed.

S&F in repairs CP brass jet spray with flexible pipe 1.50m long fixed for EWC suitable for 15mm bore of pipe etc complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed up, capacity in 500 Ltrs, hoisted and fixed in position with all fittings and fixtures including float valve 20 mm bore in position complete all as specified in SSR Part- I. include is dismantling of existing water tank etc complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed up, capacity in 1000 Ltrs, hoisted and fixed in position with all fittings and fixtures including float valve 20 mm bore in position complete all as specified in SSR Part-I include is dismantling of existing water tank etc complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc complete all as specified and directed.

S&F in repair low level flushing systern PVC valveless syphonic action type, 10 ltrs capacity complete all as specified.

S&F in repair vitreous china wash down water closet pan (padestal pattern) white including fixing bolts and fixtures,P or S trap etc complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan one piece type complete with soft closing cover white including fixing bolts and fixtures,P or S trap etc complete all as specified and directed.

S&F in repairs stop valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed etc complete all as specified and directed.

S&F in repairs angle valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed etc complete all as specified and directed.

S&F in repairs shower concealed stop valve, bore of dia 15mm of Chromium plated fancy type cast copper alloy with long shank and capstan head for (Bath shower) screwed for iron pipe and fixed including making good exisiting surfaces complete all as specified and directed.

S&F in repair 15mm bore Chromium plated Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs wall mixer with L-band(provision of overhead shower) 15mm bore brass chromium plate foam flow for mixing hot and cold water fancy type complete all as specified and directed.

S&F in repairs basin mixer 15mm bore brass chromium plate foam flow for mixing hot and cold water fancy type complete all as specified and directed.

S&F in repairs sink mixer with swan neck 15mm bore brass chromium plate foam flow for mixing hot and cold water fancy type complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

S & F in repairs brass chromium plated showe rose 125mm size with shower arm complete all as specified an directed.

S & F PVC ( SWR pipe ) 110 mm bore rain water pipe including removing old pipe and making good the disturbed surfaces in CM 1:4 or PCC 1:2:4 complete all as specified and directed.

S&F in repair PVC (SWR) bends of radius 110 mm complete all as specified and directed.

Disconnecting existing tanks exc. 500 but n. exc. 1000 Ltr Capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including taking down ball valves 15mm/20mm and refixing and Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.complete all as specified and directed.

Taking up or down steel tubing and connectipons for 15 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connectipons for 20 mm bore of pipe complete all as specified and directed.

S & F GI tubes medium grade with all fittings fixed to walls and ceiling or laid in floors of 15 mm bore of pipe complete all as specified and directed.

S & F GI tubes medium grade with all fittings fixed to walls and ceiling or laid in floors of 20 mm bore of pipe complete all as specified and directed.

Supply & Fixing in repair 32 mm dia PVC Waste pipe suitable for Wash hand basin/kitchen sink all as specified and directed by Engineer-in-Charge.

S&F in repairs corner glass shelf 300mm with brass brackets complete all as specified and directed.

S&F in repairs CP brass towel rail complete all as specified and directed

S&F in repairs CP brass towel ring complete all as specified and directed

M&L for Preparation of Newly Plastered surfaces of Wall and applying Two coats of Oil Bound Distemper over a coat of chalk whitening all as specified and directed.

M&L for Preparation of Newly Plastered surfaces of Ceiling and applying Three coats of White Washing all as specified and directed.

M&L for Preparation of Newly Plastered surfaces of wall and applying two coat of Cement Base Paint over a coat of alkaline primer complete all as specified and directed.

Dismantling boarding as in kitchen cupboard,drawers including chowkhats etc. fixed in any position complete all as specified and directed.

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush shutter of size plain 18mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately)

M&L for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush shutter of size 12mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush shutter of size 6mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S&F for auto closing 15-22mm concealed hinges, 2 holes complete as for kitchen cupboard all as specified and directed.

S&F for soft closing cold rolled steel drawer channel with telescopic ball bearing,latch,etc. complete all as specified and directed.

S&F for brass Drawer pulls/handle, 3 screw plate with fixed dished pull; 80 mm to 100mm long complete all as specified and directed.

S&F for 75mm Brass handles, cast type,polished brightcomplete all as specified and directed.

Demolition reinforced cement concrete in any description and in any position complete all as specified and directed.

M&L Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like using cement concrete type B-0 1:2:4 complete all as specified and directed

S&F Formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M & L mild steel TMT bars 6 to 8mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and directed

Dismantling framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed

Dismantaling of asbestos cement (Corrugated, semi corrugated etc) sheetiting in roof covering complete all as specified and directed

S & F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S & F for Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Gde E-250) quality B complete all as specified and directed.

S&F for framed work for framework and portions framed and hung as gates,including hinges,stops,hand-made sliding bolts etc. conforming to Fe.290.Gde-E-165 complete all as specified and directed

Welded steel wire fabric supplied and fixed complete to wood or steel members weight n exc. 4kg/sqm complete all as specified and directed

M/S S P CONSTRUCTION

M/s Moti Babu Agarwal