REPAIR REPLACEMENT TO FLOOR/WALL TILES PLUMBING SANITARY FITTING FLOOR WALL TILES OF CERTAIN BLDG OF 19 AD REGT 707TSU 955 AD REGT WKSP LT AD BTY AND DEPOT BTY AT ZONE B AREA INCLUDING REPAIR MAINT OF CEILING FANS EXHAUST FANS GEYSERS CONNECTED AC

Amount

Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 75 mm thick surface finished even and smooth without using extra cement to receive the topping layer complete all as specified and directed.

M&L for glazed ceramic joint free coloured tiles in vertical surface 350 x 250 mm x 7 mm/450 x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles including 10mm thick rendering in CM 1 :4 complete all as specified and directed.

M&L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in CM 1 :6 complete all as specified and directed.

All as per item No 4 above but vertical surfaces area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm as skirting non skid ceramic tiles including 10 mm thick rendering in CM 1:4 complete all as specified and directed

M&L for Non Skid ceramic tiles 7 to 8 mm thick (square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 20mm thick screed bed in CM 1 :6 complete all as specified and directed.

All as per item No 6 above but vertical surfaces area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm as skirting non skid ceramic tiles ncluding 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like 15mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

M&L for vitreous china wash basin, white,flat back, size 550 x 400 mm with brackets, including supply & fixing pillar cock 15 mm bore CP fancy type, PVC connection of 450 mm long, PVC (HDPE) 32 mm bore waste pipe, brass couplings 32 mm CP etc complete all as sapecified and directed.

S&F in repairs viterious china squatting pan orissa pattern size 580x440mm white intigral foot rest & including 10 lit cap flushing cistern PVC low level & flush pipe including concrete bedding & including P trap 100mm complete all as specified and directed.

M&L for Vitreous China urinals, bowl type flat back size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc complete all as sapecified and directed.

S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, 'P' or 'S' type, inc. 10 litres, PVC flushing cistern, L L, white, with inlet,ball valve, float & brackets, inc. flush pipe, PVC tube 32mm dia. & inc. plastic water closet seat, black, closed pattern with flat bottem, & cover & M S CP or aluminium hinging device, complete all as specified and directed.

S&F PVC 10 litres capacity valveless ,syphonic action type low level flushing cistern ,white including flush pipe, cantilever brackets ,inlet, ball valve, float and handle, PVC connection 15mm dia etc complete all as specified and directed.

S&F health faucet with fluxi pipe and hand shower ,the length of hose 1.50mt fitted to the tap complete all as specified and directed.

S&F in repairs EWC seat cover of any pattern including cover and Mild steel chromium plated hinging devices of any colour complete all as specified and directed.

Taking up or down GI steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Taking up or down GI steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings fixed to walls and ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings fixed to walls and ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 15 mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 20 mm bore of pipe complete all as specified and directed.

S&F in repairs Ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 20 mm bore of pipe complete all as specified and directed.

S&F in repairs Ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 25 mm bore of pipe complete all as specified and directed.

S&F in repairs Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mm bore of pipe complete all as specified and directed.

S&F in repairs Gun metal globe or gate valves with iron wheel head screwed both ends (ISI marked) for iron pipe of 25 mm bore of pipe complete all as specified and directed.

S&F in repairs for 15mm bore of pipe pillar taps cast copper alloy, with capstan head chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair Stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle chromium plated fancy type screwed both ends for iron pipe or for unions for 15 mm bore of pipe complete all as specified and directed.

S&F in repairs bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fancy type chromium plated of 15 mm bore of pipe complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125 mm size with or without swivel joint complete all as specified and directed.

S&F in repairs Waste fittings 32 mm dia, brass, chromium plated for sinks/basins etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Taking down ceiling fan any size or sweep after disconnecting, dismantling and removal to trade workshop for repair and refixing after repair to its place complete all as specified and directed.

Opening the unserviceable/burnt fan 1200/1400 mm sweep and cutting of old burnt copper winding and rewinding the same with super enamelled copper winding wire of suitable gauge including insulating material such as paper cotton sleeves, varnish, reassembling, painting with one coat of primer and two coats of white enamel paint to fan motor and blades,testing and connecting for satisfactory run, complete all as specified and directed.

Supply and replacing of Ball bearing of the ceiling fan (any sweep) as per existing size incl greasing/oiling, complete all as specified and directed.

Supply and replacenment gun metal bushes of surface size for ceiling fan incl necessary mechanical work, complete all as specified and directed.

Supply and replacing of cord cable, three core 1.5 Sqmm PVC insulated copper conductor cable for connecting ceiling fan, complete all as specified and directed.

Supply and replacing electronic step type fan regulator 240 Volt, 50 C/S, five step, suitable for 1200/1400mm sweep ceiling fan,complete all as specified and directed. Make:- Anchor/ Philips/ Havells.

S&F Capacitor of of 2.5 MFD for ceiling fan, complete all as specified and directed.

S&F Capacitor of 4 Mfd for exhaust fan, complete all as specified and directed.

Supply for replacement ceiling fan blade set of three heavy duty suitable for 1200/1400mm sweep of suitable approved make complete all as specified and directed.

S&F PVC canopy for ceiling fan 1200/1400mm sweep complete for various makes/model of fan, complete all as specified and directed.

M&L for ceiling fan down rod made out of 15mm GI tubing medium grade including making necessary threads / holes etc suitable for hanging ceiling fan up to 3 meter height after removing the unsv down rods complete all as specified and directed.

S & F of ceiling fan clamps nut & bolt and rubber bush of suitable size complete all as specified and directed.

M&L for alloy steel D-Hook hanger (Heavy duty) with M10X75mm fastners for hanging ceiling fan complete all as specified and directed.

S&F ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star ratedwith brushless direct current motor (BLDC) complete all as specified and directed.

Disconnecting and taking down exhaust fan and blades any size or sweep after dismantling and removal to trade workshop for repair and after repair refixing the same to its original place, complete all as specified and directed.

M&L for Strip opening and cutting of old burnt copper winding of exhaust fan and rewinding of exhaust fan motor of sweep 380/450mm with super enamelled copper winding wire of suitable gauge including insulating material such as paper cotton sleeves, varnish, re-assembling, testing and connecting for satisfactory run, complete all as specified and directed.

All as per item No. 48 above, but of 200/250/300mm sweep.

S&F ball bearing of exhaust fan of any size/make as per the existing, complete all as specified and directed.

Supply and replacenment gun metal bushes of surface size for exhaust fan incl necessary mechanical work, complete all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mm complete all as specified and directed

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed

S&F exhaust fan, steel body AC single Phase. 230V of size 380mm sweep with, blades, and frame and louvers complete all as specified and directed

S&F exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep with, blades, and frame and louvers complete all as specified and directed

S&F exhaust fan, steel body AC single Phase. 230V of size 230 mm sweep with, blades, and frame and louvers complete all as specified and directed

Servicing of Geyser by disconnecting the electric and water supply connections, dismantling the geysers of any size, type & capacity and opening the top and bottom cover, thermostat, heating element, safety valve, vent pipe, separating inner & outer tank, removing glass wool insulation complete and keeping aside for re-use after de-scaling of inner tank by liquid chemical and with pressure water jet, painting one one coat primer and two coat of enamel paint and assembling back the geyser including re-installation on wall with studs, nuts & bolts complete and testing after reconnecting electric and water connections, complete all as specified and directed.

S&F Heating element for geyser of cap 1.5/2.0KW, AC 230 Volts, 50 Hz (as per sample), complete all as specified and directed. Make:- Micron/ Bajaj/ Havells

S&F Thermostat for Geyser of capacity 25/50 ltr (long size) with temperature setting adjustment range from 40 to 85°C, ISI Marked, complete all as specified and directed. Make:- Philips/ Bajaj/ Venus.

S&F in replacement geyser Syphon Assembly Set suitable for 25 ltr capacity geyser, fixed complete all as specified and directed .

S&F in replacement rubber gasket for water heater storage type of any capacity and suitable as per the existing, complete all as specified and directed .

Taking down old unserviceable plug top from geyser connection and Supply and Fixing in replacement plug top 15/16 Amps for Geyser, complete all as specified and directed. Make:- Havells/ Anchor/ Leader/ Plaza.

S&F PVC sheathed three core copper conductor flexible wire of size 2.5 Sqmm for connecting geyser, complete all as specified and directed. Make:- Havells / Plaza /Polycab

S&F Sheet Metal Enclosure with socket, plug top and MCBs single pole and neutral enclosures with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 Volts, complete all as specified and directed.

Supply and replacement of safety valve for geyser of 25/50 litre capacity, complete all as specified and directed.

S&F in repairs/replacement of cold/hot water inlet pipe 15mm dia 450mm long with PVC union complete all as specified and directed.

S &F in repair to Prismatic cold water inlet pipe 15mm dia 450mm long with brass union and rubber washers complete all as specified & directed.

Disconnecting and taking out geyser of capacity 25 litre and replacement of copper/SS inner tank and refilling of glass wool, refixing, connecting and testing, complete all as specified and directed.

Disconnecting and taking out geyser of capacity 50 litre and replacement of copper/SS inner tank and refilling of glass wool, refixing, connecting and testing, complete all as specified and directed.

S&F of geyser Bolt 100 mm Long with nut & washers, complete all as specified and directed

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed .

S&F in repairs/repalcement of modular fan regulator step type one module 240 volts. 50 Hz complete all as specified and directed

S & F in replacement of rusted out louvers with MS finned louvers complete all as specified and directed. of the following sizes of exhaust fans Note : (Rates quoted to be included of necessary sky folding/ladders to work upto the ht of 15mtrs) (a) 300 to 380 mm sweep

All as per Item No. 75 above but 400 to 600 mm sweep

S&F in repairs ceiling fan shaft of suitable size as per existing complete all as specified and directed

Taking down wall fan any size or sweep after disconnecting, dismantling and removal to trade workshop for repair and refixing after repair to its place complete all as specified and directed.

Opening the unserviceable/burnt wall fan 400 mm sweep and cutting of old burnt copper winding and rewinding the same with super enamelled copper winding wire of suitable gauge including insulating material such as paper cotton sleeves, varnish, reassembling, painting with one coat of primer and two coats of white enamel paint to fan outerbody,testing and connecting for satisfactory run, complete all as specified and directed.

S&F in repairs wall fan blade cover front and back of 400mm sweep including rubber gasket nuts/bolts and washers complete all as specified and directed

S&F in repairs wall fan blade of suitable capacity PVC/steel complete all as specified and directed

S&F in repairs capilary thermostat for water heater/geyser with temperature adjustable for 25 Ltrs capacity geyser complete all as specified and directed

S&F in repairs wall fan body plastic/PVC complete all as specified and directed as per the existing size

S&F in repairs wall fan 400mm sweep, 50 watts with double string, low noise, air delivery 70CMM, RPM-1320, overload thermal protector, 240 volts, 50 Hz complete all as specirfied and directed.

M/S SOMANATH ENTERPRISES

M/s MAA BHAIRABI ENTERPRISES

MM ENGINEERING SYSTEMS

HARAGOURI SUPPLIERS

ABC CONSTRUCTION COMPANY

M/s Ats Electricals