Upgradation of O.T. No. 3 and 4 to Modular operation theater with HVAC by providing Puff paneling etc. in IGMC Shimla. (SH- Balance Work of providing and fixing hermitically sealed sliding door in all O.Ts in IGMC Shimla.)

Amount

HERMITICALLY SEALED SLIDING DOOR :- Door Size 1650 mm x 2100 mm with vision panels, 300mm x 300mm. The minimum width of the door should be 1600mm to allow smooth movement of patient in the operating room. To maintain sterility and the correct air pressure in the room, all doors should be sliding hermetically sealing type. Track system and door blade guide system. Door leaf strength of leaf core: 40mm (33mm tubular chipboard (core) + 3mmMDF (medium density fibreboard) on both side + 0.8mm HPL (High Pressure Laminate) on both side). Circumferential profile: Anodized aluminium profile, circumferential 56mm, V-shaped in the bottom area towards door lead on ground lobes. Surface: 0.8mm HPL-laminate on 3mm MDF board as carrier material; depending on the chosen material a free passage of 1.55m or more may require a seam in the laminate. Sealing: Rubber gaskets embedded in the door leaves press against the frame and the door, providing a hermetic sealing of the door. Rail system guide rail: Anodized aluminium profile with two countersunk slots at 42° for carrying wheel position in closed condition. Carrying Wheels: Ball bearing with duroplastic rolls. Covering: Rounded covering of extruded anodized aluminium. Ground Rail: Duroplastic lead lobes on bottom running rail. Operation Handle: Bilateral (inside/ outside) stainless steel lever arm handle with integrated return spring to neutral position. Frame HPL-system frame: HPL- coated embrasure board with circumferential aluminium corner protection profiles for arbitrary wall strengths. Closed frame steel: Closed steel frame with additional aluminium corner protection profiles (for sealing the operation side of the door). Closed frame stainless steel: Stainless Steel frame, steel grade 1.4301, polished 240 grains, with additional stainless steel corner profiles (for sealing the operation side of the doors). Window: Integrated 300mm x 300mm window, mounted flush with the adjacent area of the leaf. and as directed by the Engineer in Charge including carriage of materials in all leads and lifts.

HERMITICALLY SEALED SLIDING DOOR :- Door Size 1500 mm x 2100 mm with vision panels, 300mm x 300mm. The minimum width of the door should be 1500mm to allow smooth movement of patient in the operating room. To maintain sterility and the correct air pressure in the room, all doors should be sliding hermetically sealing type. Track system and door blade guide system. Door leaf strength of leaf core: 40mm (33mm tubular chipboard (core) + 3mmMDF (medium density fibreboard) on both side + 0.8mm HPL (High Pressure Laminate) on both side). Circumferential profile: Anodized aluminium profile, circumferential 56mm, V-shaped in the bottom area towards door lead on ground lobes. Surface: 0.8mm HPL-laminate on 3mm MDF board as carrier material; depending on the chosen material a free passage of 1.40 m or more may require a seam in the laminate. Sealing: Rubber gaskets embedded in the door leaves press against the frame and the door, providing a hermetic sealing of the door. Rail system guide rail: Anodized aluminium profile with two countersunk slots at 42° for carrying wheel position in closed condition. Carrying Wheels: Ball bearing with duroplastic rolls. Covering: Rounded covering of extruded anodized aluminium. Ground Rail: Duroplastic lead lobes on bottom running rail. Operation Handle: Bilateral (inside/ outside) stainless steel lever arm handle with integrated return spring to neutral position. Frame HPL-system frame: HPL- coated embrasure board with circumferential aluminium corner protection profiles for arbitrary wall strengths. Closed frame steel: Closed steel frame with additional aluminium corner protection profiles (for sealing the operation side of the door). Closed frame stainless steel: Stainless Steel frame, steel grade 1.4301, polished 240 grains, with additional stainless steel corner profiles (for sealing the operation side of the doors). Window: Integrated 300mm x 300mm window, mounted flush with the adjacent area of the leaf. and as directed by the Engineer in Charge including carriage of materials in all leads and lifts.

HERMITICALLY SEALED SLIDING DOOR :- Door Size 1200 mm x 2100 mm with vision panels, 300mm x 300mm. The minimum width of the door should be 1200mm to allow smooth movement of patient in the operating room. To maintain sterility and the correct air pressure in the room, all doors should be sliding hermetically sealing type. Track system and door blade guide system. Door leaf strength of leaf core: 40mm (33mm tubular chipboard (core) + 3mmMDF (medium density fibreboard) on both side + 0.8mm HPL (High Pressure Laminate) on both side). Circumferential profile: Anodized aluminium profile, circumferential 56mm, V-shaped in the bottom area towards door lead on ground lobes. Surface: 0.8mm HPL-laminate on 3mm MDF board as carrier material; depending on the chosen material a free passage of 1.15m or more may require a seam in the laminate. Sealing: Rubber gaskets embedded in the door leaves press against the frame and the door, providing a hermetic sealing of the door. Rail system guide rail: Anodized aluminium profile with two countersunk slots at 42° for carrying wheel position in closed condition. Carrying Wheels: Ball bearing with duroplastic rolls. Covering: Rounded covering of extruded anodized aluminium. Ground Rail: Duroplastic lead lobes on bottom running rail. Operation Handle: Bilateral (inside/ outside) stainless steel lever arm handle with integrated return spring to neutral position. Frame HPL-system frame: HPL- coated embrasure board with circumferential aluminium corner protection profiles for arbitrary wall strengths. Closed frame steel: Closed steel frame with additional aluminium corner protection profiles (for sealing the operation side of the door). Closed frame stainless steel: Stainless Steel frame, steel grade 1.4301, polished 240 grains, with additional stainless steel corner profiles (for sealing the operation side of the doors). Window: Integrated 300mm x 300mm window, mounted flush with the adjacent area of the leaf. and as directed by the Engineer in Charge including carriage of materials in all leads and lifts.

HERMITICALLY SEALED SLIDING DOOR :- Door Size 900 mm x 2100 mm with vision panels, 300mm x 300mm. The minimum width of the door should be 900mm to allow smooth movement of patient in the operating room. To maintain sterility and the correct air pressure in the room, all doors should be sliding hermetically sealing type. Track system and door blade guide system. Door leaf strength of leaf core: 40mm (33mm tubular chipboard (core) + 3mmMDF (medium density fibreboard) on both side + 0.8mm HPL (High Pressure Laminate) on both side). Circumferential profile: Anodized aluminium profile, circumferential 56mm, V-shaped in the bottom area towards door lead on ground lobes. Surface: 0.8mm HPL-laminate on 3mm MDF board as carrier material; depending on the chosen material a free passage of 0.85 m or more may require a seam in the laminate. Sealing: Rubber gaskets embedded in the door leaves press against the frame and the door, providing a hermetic sealing of the door. Rail system guide rail: Anodized aluminium profile with two countersunk slots at 42° for carrying wheel position in closed condition. Carrying Wheels: Ball bearing with duroplastic rolls. Covering: Rounded covering of extruded anodized aluminium. Ground Rail: Duroplastic lead lobes on bottom running rail. Operation Handle: Bilateral (inside/ outside) stainless steel lever arm handle with integrated return spring to neutral position. Frame HPL-system frame: HPL- coated embrasure board with circumferential aluminium corner protection profiles for arbitrary wall strengths. Closed frame steel: Closed steel frame with additional aluminium corner protection profiles (for sealing the operation side of the door). Closed frame stainless steel: Stainless Steel frame, steel grade 1.4301, polished 240 grains, with additional stainless steel corner profiles (for sealing the operation side of the doors). Window: Integrated 300mm x 300mm window, mounted flush with the adjacent area of the leaf. and as directed by the Engineer in Charge including carriage of materials in all leads and lifts.

Supply and installation of Double leaf swing SS door :- Door Size 1650 mm x 2100 mm with vision panels, 300mm x 300mm. The minimum width of the door should be 1650mm to allow smooth movement of patient in the operating room with D type handle, lock, door frame and door closer. Door leaf strength of leaf core: 40mm (33mm tubular chipboard (core) + 0.6mm SS Sheet on both side . Circumferential profile: Anodized aluminium profile, circumferential 56mm, V-shaped in the bottom area towards door lead on ground lobes. Sealing: Rubber gaskets embedded in the door leaves press against the frame and the door. Covering: Rounded covering of extruded anodized aluminium. Ground Rail: Operation Handle: Bilateral (inside/ outside) stainless steel lever arm handle with integrated return spring to neutral position. Frame SS-system frame: circumferential aluminium corner protection profiles for arbitrary wall strengths. Closed frame steel: Closed steel frame with additional aluminium corner protection profiles (for sealing the operation side of the door). Closed frame stainless steel: Stainless Steel frame, steel grade 1.4301, polished 240 grains, with additional stainless steel corner profiles (for sealing the operation side of the doors). Window: Integrated 300mm x 300mm window, mounted flush with the adjacent area of the leaf. and as directed by the Engineer in Charge including carriage of materials in all leads and lifts.

Supply and installation of Double leaf swing SS door :- Door Size 1500 mm x 2100 mm with vision panels, 300mm x 300mm. The minimum width of the door should be 1500mm to allow smooth movement of patient in the operating room with D type handle, lock, door frame and door closer. Door leaf strength of leaf core: 40mm (33mm tubular chipboard (core) + 0.6mm SS Sheet on both side. Circumferential profile: Anodized aluminium profile, circumferential 56mm, V-shaped in the bottom area towards door lead on ground lobes. Sealing: Rubber gaskets embedded in the door leaves press against the frame and the door. Covering: Rounded covering of extruded anodized aluminium. Ground Rail: Operation Handle: Bilateral (inside/ outside) stainless steel lever arm handle with integrated return spring to neutral position. Frame SS-system frame: circumferential aluminium corner protection profiles for arbitrary wall strengths. Closed frame steel: Closed steel frame with additional aluminium corner protection profiles (for sealing the operation side of the door). Closed frame stainless steel: Stainless Steel frame, steel grade 1.4301, polished 240 grains, with additional stainless steel corner profiles (for sealing the operation side of the doors). Window: Integrated 300mm x 300mm window, mounted flush with the adjacent area of the leaf. and as directed by the Engineer in Charge including carriage of materials in all leads and lifts.

Supply and installation of Double leaf swing SS door :- Door Size 1200 mm x 2100 mm with vision panels, 300mm x 300mm. The minimum width of the door should be 1200mm to allow smooth movement of patient in the operating room with D type handle, lock, door frame and door closer. Door leaf strength of leaf core: 40mm (33mm tubular chipboard (core) + 0.6mm SS Sheet on both side. Circumferential profile: Anodized aluminium profile, circumferential 56mm, V-shaped in the bottom area towards door lead on ground lobes. Sealing: Rubber gaskets embedded in the door leaves press against the frame and the door. Covering: Rounded covering of extruded anodized aluminium. Ground Rail: Operation Handle: Bilateral (inside/ outside) stainless steel lever arm handle with integrated return spring to neutral position. Frame SS-system frame: circumferential aluminium corner protection profiles for arbitrary wall strengths. Closed frame steel: Closed steel frame with additional aluminium corner protection profiles (for sealing the operation side of the door). Closed frame stainless steel: Stainless Steel frame, steel grade 1.4301, polished 240 grains, with additional stainless steel corner profiles (for sealing the operation side of the doors). Window: Integrated 300mm x 300mm window, mounted flush with the adjacent area of the leaf. and as directed by the Engineer in Charge including carriage of materials in all leads and lifts.

Om Parkash Sharma