REPAIR / MAINTENANCE / REPLACEMENT OF LT OH LINE / LT UG CABLE AND FEEDER PILLAR BOX AND WATER SUPPLY ALLIED WORK AT CQA (SV) AREA UNDER GE DEHU ROA D

Taking down unserviceable any type of pole and Supply & erect in repair in position steel tubular pole swagged type as per IS 2713 complete with MS base plate finial tapper plug cap bolt, nut, screws etc all as specified for swaged pole of type 410 SP 31 , 09 mtrs long incl painting with two coats of aluminium paint over a coat of red oxide paint all as directed including removing existing pole. ( Note :- Excavation and earth work and PCC in foundation shall be measured and paid separately)

Taking down unserviceable any type of pole, supply & errection in repair in position steel tubular pole swagged type as per IS 2713 complete with MS base plate finial tapper plug cap bolt, nut, screws etc all as specified for swaged pole of type 410 SP 55 , 11 mtrs long incl painting with two coats of aluminium paint over a coat of red oxide paint all as directed including removing existing pole.( Note :- Excavation and earth work and PCC in foundation shall be measured and paid separately)

M&L for painting of steel tubler LT pole any type any description including cross arm bracing with one coat of white sylver colour , including the marking of pole no all as directed.

M&L for earthing complete with galvanized steel pipe electrode,40mmbore,medium grade,2.5 Mtrers length,buried directly and preferably vertically in ground with top edge not less than 1.25 meters below ground leavle cinnected with earthing lead of 4mm dia galvanised iron or steel wire all as shwn in Plate no-2 to the earthing test point all as specified and indicated including testing on completion.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead using galvanised iron strip 25×4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.(For all installation transformer)