Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.4 LAccepted-AOC M 18 HOUSING BOARD UNIT MADAYANKUTTAI POST METTUR DAM 636 452 | METTUR DAM | SALEM | TAMIL NADU | 636452 | ₹39.4 L Quoted ₹42.8 L | L1 | Accepted-AOC Accepted |
| 2 | L2₹46.4 LRejected-AOC 5A 582 CALDWELL COLONY TUTICORIN 628008 | TUTICORIN | THOOTHUKUDI | TAMIL NADU | 628008 | ₹46.4 L | L2 | Rejected-AOC Rejected |
| Sl No | Description | Qty | Unit | THIAGARAJAN ENGINEERING CONTRACTOR L1 | CKEE ENGINEERING PRIVATE LIMITED L2 |
|---|---|---|---|---|---|
| 1.00 | (Supply to the NCTPS-I stores. The contractor should inspect the site in overhaul to ascertain the actual requirement of Iron & Steel material and as per the direction of Engineer in charge the materials will be supplied by TNPGCL available at stores during execution of works).
Corton steel of 6 mm thick including loading, transporting and un loading charges. | 0.6 | MT | 92,520 ₹55,512 | 95,000 ₹57,000 |
| 2.00 | Corton steel of 3.15 mm thick including loading, transporting and un loading charges | 1.5 | MT | 92,520 ₹1.4 L | 95,000 ₹1.4 L |
| 3.00 | EN -8 ROD | 100 | kg | 80 ₹8,000 | 85 ₹8,500 |
| 4.00 | Stuffing box for SADC shaft damper | 10 | Nos | 10,815 ₹1.1 L | 12,000 ₹1.2 L |
| 5.00 | Style-I Bellow of size - 3007 X 1839 X 81 mm | 10 | Mtr | 3,856 ₹38,560 | 4,500 ₹45,000 |
| 6.00 | Burner Door with frame assembly for AB/EF Elevation
Material: Door: Cabom Steel
Frame: Carbon steel unequal Angle 80 x 50 8 mm With Bolt & Nut - HT, Size: M12 | 8 | Sets | 53,100 ₹4.2 L | 55,000 ₹4.4 L |
| 7.00 | Burner Door with frame assembly for CD ElevationMaterial: Door: Cabom SteelFrame: Carbon steel unequal Angle 80 x 50 8 mm With Bolt & Nut - HT, Size: M12 | 4 | Sets | 64,850 ₹2.6 L | 65,500 ₹2.6 L |
| 8.00 | Square head Pin | 52 | Nos | 1,130 ₹58,760 | 1,250 ₹65,000 |
| 9.00 | Reach rod Pin | 24 | Nos | 75 ₹1,800 | 80 ₹1,920 |
| 10.00 | Air /Oil Nozzle Pin | 56 | Nos | 245 ₹13,720 | 300 ₹16,800 |
Tender Value
Refer Docs
EMD Value
₹48,800
Closing Date
9 Sept 2025, 2:00 pmClosed
SE MI NCTPS1 CH 120
OFFICE OF THE SE MI NCTPS1 CH 120
NCTPS I SE MI circle AOH 25 26 BM Dn Unit I Revamping of SADC dampers in corner 1 4 Rectification of Burner door Renewal of sagged radiant roof tubes from CRH to HRH Inter pass and other allied works during AOH for the year 2025 26
2025_EB_601515_1
CE SE MI NCTPS I 179 25 26
Open Tender
Power/Energy Projects/Products
15 days
Works
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹48,800
Yes
2 May 2026
8 Sept 2025
10 Sept 2025
8 Sept 2025
9 Sept 2025
8 Sept 2025
Amount
(Supply to the NCTPS-I stores. The contractor should inspect the site in overhaul to ascertain the actual requirement of Iron & Steel material and as per the direction of Engineer in charge the materials will be supplied by TNPGCL available at stores during execution of works). Corton steel of 6 mm thick including loading, transporting and un loading charges.
Corton steel of 3.15 mm thick including loading, transporting and un loading charges
EN -8 ROD
Stuffing box for SADC shaft damper
Style-I Bellow of size - 3007 X 1839 X 81 mm
Burner Door with frame assembly for AB/EF Elevation Material: Door: Cabom Steel Frame: Carbon steel unequal Angle 80 x 50 8 mm With Bolt & Nut - HT, Size: M12
Burner Door with frame assembly for CD ElevationMaterial: Door: Cabom SteelFrame: Carbon steel unequal Angle 80 x 50 8 mm With Bolt & Nut - HT, Size: M12
Square head Pin
Reach rod Pin
Air /Oil Nozzle Pin
Bell Crank Pin
Zero Pin
GI corrugated Sheet Size: 920 MM X 1830mmX thick 18 SWG Material : GI
Providing scaffolding arrangement at Boiler area including consumables and T&P's
Revamping of SADC damper internals in corner 1&4 Charges for fabrication of New air damper by sizing, bending of carbon steel plate of 8 / 6 mm thick, 25 mm of EN8 pipe sizing, hinge plates, link plate, arresting plates etc., drilling and welding the arresting plate, hinge plate suitability as per the released sample.(2Nos of Moving plate & 1 No fixed plate) including consumables and T&P's. .
Charges for cutting removal of worn out air dampers fixed & moving blades, shaft, preparing air compartment, Fixing shaft and damper blades, welding shaft with moving blade and making proper alignment and checking for free operation.(2Nos of Moving plate & 1 No fixed plate) including consumables and T&P's.
Rectification of Metallic expansion joints Style 1 Renewal / reconditioning of metallic expansion joints style - 1 / 2:-Work involves arresting the upstream and down stream of duct, cutting and removal of existing eroded cover plate and metallic expansion joints and gauching. Leading, lifting, positioning of new expansion joint, aligning with the duct channel and complete welding. Including consumables and T&P's.
Charges for fabrication and erection of Damaged / eroded support structure in SADC. Including consumables and T&P's. (Required structural material will be supplied by TNPGCL)
Charges for renewal of eroded / weakened Radiant roof tube T-11 boiler tubes of size Dia 51 x 5mm ( above 44.5mm ) in b/w CRH to HRH inclusive of transportation, cutting of defective tubes, edge/spool preparation, welding with IBR welder and assisting for hydraulic test. Including consumable and hire charges for T&P's. (Material Available at stores)
ARC FILLING in CRH tube at radiant roof tubes in 1st loop after rectifying seal box including consumable and hire charges for T&P's.
Charges for bending of plates : Drawal of 3.15 / 10 mm M.S plate from central stores transporting the materials to outside workshop cutting in to required size, bending to the required size and profile, transporting back to NCTPS boiler area. Including consumable and hire charges for T&P's.
Renewal of radiant roof Skin casing welding and patch up work at CRH to HRH area (This work involves removing refractory, cutting the damaged existing skin casing sheet where ever required, Welding with new skin casing sheet) including consumable and hire charges for T&P's.
Refractory: Charges for chipping removal of old defective refractory, cleaning, surface preparation, patch work new refractory in various elevation of Boiler, and disposing removed refractory from site. i) Charges for transporting the refractory from stores and unloading at site, leading, lifting, stacking at 7m to 52m elevation of Boiler and removing the waste refractory from Boiler lowering to the ground floor, loading to tipper and disposing at waste disposal area of TPS. Charges for chipping removal of old defective refractory, cleaning, surface preparation, mixing the refractory with water application and curing the patch worked refractory in Boiler at various elevation. Including consumable and hire charges for T&P's.
Charges for fin welding by cleaning, surface preparation and welding. Including consumables and T&P's.
This work involves Cutting and removal of the existing damaged M.S / G.I Corrugated sheets rectification and rewelding with new sheet in the pent house roof. Including consumables and T&P's.
Charges for cutting removal of damaged / deformed Burner door frame in all 4 corners and welding with new frame and fixing the new burner door. Including consumable and hire charges for T&P's.
CKEE ENGINEERING PRIVATE LIMITED (BID ID -1452531)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.87 MB
BOQ_719069.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid