REPAIR/MAINTENANCE OF INTERNAL ELECTRIFICATION, FAN, HEATING AND COOLING APPLIANCES, SECURITY LIGHTS, GARDEN LIGHTS AND ALLIED WORKS AT 31 WEU AND NRS THANE UNDER GE(NW) MANKHURD

Amount

Taking down copper/ aluminum point wiring (Light/Fan/Socket or power) complete including fitting and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. (Removing materials to store for keeping in safe custody for reuse at site or for credit or and making good disturbed surfaces to walls floors etc).

Taking down main switch/DB/ changeover/AC box of any capacity including fixing accessories

M&L for point wiring complete 1.5 sqmm single core PVC FRLS insulated, unsheathed, 1100V grade multistranded copper conductor drawn through in and including PVC casing and capping surface on walls, roofs floors etc and bushed conduit / casing & caping to pass through wall/floor including PVC insulated copper earth continuity conductor 1.5 Sqmm cable ( green) connected to common earth dolly including pressed steel terminal boxes 60 mm deep concealed in walls with laminated sheet top cover 3mm thick for housing the switches, sockets regulations etc all specified and directed by Engineer-in-Charge for the following:- For one light, fan, call bell point controlled by one switch.

All as per item No 3 here-in-before but For one 5A 2 pin/3pin socket out let multipurpose on same board with other switches.

All as per item No 3 here-in-before but For one 5A 2 pin/3pin socket out let multipurpose on Independent board.

All as per item No 3 here-in-before but for one light point controlled by two 2- way switch.

All as per item No 3 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, multistranded 1100 volt grade cable and 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, multistranded 1100 volt grade cable as continuous earth lead.

S & F switch piano flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified.

S & F switch socket combination 2 in 1, 3 pin 5 Amps multipurpose flush type , 240 volts, white finish complete all as specified.

S & F switch flush type single pole two way 5 Amps, 240 volts, white finish complete all as specified.

S & F switch socket combination 2 in 1, 3 pin, 5A/16 Amps multipurpose flush type , 240 volts, white finish complete all as specified.

S & F bell push AC 230 Volt, flush type 5 Amps white finish complete all as specified.

S & F electronic socket size, rotary, 5 speed step type regulator, 250 V white finish complete all as specified.

S & F Calling Bell 230 Volt, AC, Single pole.

S & F ceiling rose, 3 phase/PVC polycarbonate, isolated body

S & F in repair for switch piano flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified.

S & F in repair for switch socket combination 2 in 1, 3 pin 5 Amps multipurpose flush type , 240 volts, white finish complete all as specified.

S & F in repair for switch flush type single pole two way 5 Amps, 240 volts, white finish complete all as specified.

S & F in repair for switch socket combination 2 in 1, 3 pin, 5A/16 Amps multipurpose flush type , 240 volts, white finish complete all as specified.

S & F in repair for bell push AC 230 Volt, flush type 5 Amps white finish complete all as specified.

S & F in repair electronic socket size, rotary, 5 speed step type regulator, 250 V white finish complete all as specified.

S & F in repair Calling Bell 230 Volt, AC, Single pole.

S & F in repair ceiling rose, 3 phase/PVC polycarbonate, isolated body

S & F in repair Modular Socket 6A, 2/3 Pin combined 2 modular, inclusive of moudler cover plate & box as per combintion of points.

S & F in repair Modular Socket 6A/16A, 2/3 Pin combined 2 modular, inclusive of moudler cover plate & box as per combintion of points.

S & F in repair Modular Switch, single pole, 1 way 6A 1 modular inclusive of moudler cover plate & box as per combintion of points.

S & F in repair Modular Switch single pole 1 way 16A 1 modular inclusive of moudler cover plate & box as per combintion of points.

S&F, double door sheet metal enclosure DB SPN 8 ways, with 200 Amps rated bus bar 240 V complete fixed properly on/in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

All as per item No 28 here-in-before but 4 ways complete all as specified and directed.

S&F double door sheet metal enclosure DB TPN, 4 ways, 415Volts (horizontal type) with 200 Amps rated bus bar properly on/in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires old or new complete all as directed.

S & F MCB, SP, 240 volt, 6 Amp to 32 amp, 10 KA, capacity having B-curve characteristics connected with suitable lugs.

All as per item No 31 here-in-before but SP 40 Amps -do-

All as per item No 31 here-in-before but SPN 16-32 Amps -do-

All as per item No 31 here-in-before but SPN 40 Amps -do-

All as per item No 31 here-in-before but TPN 63 Amps, -do-

S & F in repair MCB, SP, 240 volt, 6 Amp to 32 amp, 10 KA, capacity having B-curve characteristics connected with suitable lugs.

All as per item No 36 here-in-before but SP 40 Amps -do-

All as per item No 36 here-in-before but SPN 16-32 Amps -do-

All as per item No 36 here-in-before but TP 40 A 415V -do-

All as per item No 36 here-in-before but TPN 63 Amps, -do-

S&F sheet metal enclosure , 20A SPN with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB 20-32 Amp fixed properly on in concealed position all as directed by Engineer-in-Charge.

S & F in repair metal clad socket industrial 2pin & earth plug top 20A, 230V complete suitable for AC Box.

M&L in repair sub main wiring with two single core PVC-FRLS insulated unsheathed multistranded copper conductor cable of size 4 sqmm drawn in PVC casing caping with 2.5 Sqmm PVC-FRLS insulated unsheathed multistranded copper conductor as a continuous earth wire complete all as specified. Note : (i) Two single core cable, one run of earth copper conductor & one run of PVC casing & caping will be measured and paid as one unit length.

M&L in repair sub main wiring with two single core PVC-FRLS insulated unsheathed multistranded copper conductor cable of size 6 sqmm drawn in PVC casing caping with 6 Sqmm PVC-FRLS insulated unsheathed multistranded copper conductor as a continuous earth wire complete all as specified. Note : Two single core cable, one run of earth copper conductor & one run of PVC casing & caping will be measured and paid as one unit length.

Taking down tube light / CFL fitting any wattage from roof /wall and repairing & refixing the same at directed place incl replacement of three core 0.5 Sqmm copper conductor flexible wire/cable complete.

M & L for opening switch mounting plate, rectifying the defects in fittings and fixtures by tightening loose connectiion or taking down of unserviceable / burnt Piano switches, fan regulators, 5/15 Amps Sockets, 5/15 Amp Switch Socket combination or any other electric accessories of switch socked complete. Note - (i) Replacement of defective parts/items will be measured and paid as supply respective items here in below.

M & L for opening MCB DB/MCCB DB front door & replacing of burnt wires & testing complete after carrying out repairs. Note - (i) MCCB & MCB required to be replaced shall be paid under respective item of this schedule as supply. (ii) Minor spares such as connectors, wires, lugs are deemed to be inclusive of the quoted rate.

M & L for rewiring of old burnt out copper wiring in LT panels/LT Feeder, replacing of damaged cable glands, burnt cable lugs, bus bar link, connectors, damaged insulators, burnt copper cables, door hinges, panel door locks & scrapping of old paints & appling two coats of synthetic enamal paint over a coat of zine chrome red oxide primer paint all as directed by Engr-in-charge.

S&F Ultra bright glass LED tube rod 20 Watts, 230 volts with very high efficiency with G13 lamp holder including fixing arrangements complete, the rod shall conform to Cat No. CRYSTAL 1213T8DSTL20WLED865SGLASS of Havells or Equivalent from Wipro/Bajaj

S&F in Repairs Ultra bright glass LED tube rod 20 Watts, 230 volts with very high efficiency with G13 lamp holder including fixing arrangements complete, the rod shall conform to Cat No. CRYSTAL 1213T8DSTL20WLED865SGLASS of Havells or Equivalent from Wipro/Bajaj

S&F Surface and wall mounted batten suitable for LED tube 22 watts, 230 volts, including fixing mounting blocks 2 Nos, 1.5 sqmm 3 core PVC insulated copper conductor cable including fixing arrangements complete . The fitting shall conform to Cat No. REGALBATTENT8UPTO1X22WDSBSWH of Havells or equivalent from Wipro/Bajaj

S&F in Repairs Surface and wall mounted batten suitable for LED tube 22 watts, 230 volts, including fixing mounting blocks 2 Nos, 1.5 sqmm 3 core PVC insulated copper conductor cable including fixing arrangements complete . The fitting shall conform to Cat No. REGALBATTENT8UPTO1X22WDSBSWH of Havells or equivalent from Wipro/Bajaj

S&F in repair surface and wall mounted 10 Watt LED batten with LED rod complete, extruded aluminium housig provided for efficient heat dissipation with polycarbonate diffuser & interrated electronic driver including fixing arrangements complete . The Fitting Shall conform to Cat no - ENDURALINEARNEOBS10WLED830SPCWH of Havells or Equivalent from Wipro/Bajaj

Supply and fix in repairs decorative recessed type LED light fitting 36 watt (size 2'x2') and including driver unit, including provision of 3 core copper flexible cable 1.5 Sqmm from ceiling rose to connector, including making addition/altn to existing false ceiling and providing of false ceiling sheets, aluminium frames including fixing arrangements complete etc. The Fitting Shall Conform to Cat No -ENDURASLIMPROPLUS2X2PR28/36WLED840MOD for Module and LEDDRIVER36V28WS for driver of Havells or Equivalent from Wipro/Bajaj

Supply & fix in repairs new generation, ultra modern recess mounting luminaire 36 Watt (Pluto Neo Panel 4x1) with high brightness SMD LED as light source and including driver unit, including provision of 3 core copper flexible cable size 1.5 Sqmm from ceiling rose to connector, including making addition/altn to existing false ceiling and providing of false ceiling sheets, aluminium frames including fixing arrangements complete etc. The Fitting Shall Conform to Cat No -PLUTONEO4X1PLR36WLED840S of Havells or Equivalent from Wipro/Bajaj

Supply and fix in repair flood light fittings in street light poles/Buildings the fitting shall be of LED type 100 Watts complete with and including drivers, pressure die cast aluminium housing, prewired complete. The fitting shalll conform to cat No . JETAIRISFLS100WLED757ASYMLTG of Havells or Equivalent from Wipro/Bajaj

Supply and fix in repair flood light fittings in street light poles/Buildings the fitting shall be of LED type 150 Watts complete with and including drivers, pressure die cast aluminium housing, prewired complete. The fitting shalll conform to cat No . ENDURAPULSENSL150WLED757PASYBOTG of Havells or Equivalent from Wipro/Bajaj

S&F in repair of building Security light fitting 30 Watt made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP66 protection and impact resistance of IK07 including fixing arrangements complete all as per directed by Engr- in – charge. The fitting shall conform to Cat no ENDURAPEARLSL30WLED757SASYTOPCMP of Havells or Equivalent from Wipro/Bajaj .

M& L repair for bracket made out of GI pipe 40mm dia medium grade, 1.2mtr long bent to shape with MS flat iron clamps made out of 40mmX 6mm thick FI nuts, bolts complete all as directed by Engr-in-charge.

M&L for earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the earth plate not less than 1.5M below normal GL, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade GI Pipe, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 3 of SSR Pt-I, 2009 specification.

M&L for cutting / boring of PCC/hard standing at a depth not more than 15 cm deep and 15 cm in wide for passing earthing conductor and making good the disturbed surfaces with PCC (1:2:4) type B-0 or cement mortar (1:3) complete all as specified.

Supply and fixing of GI pipe light grade of size 15 mm bore for laying in trenches/floors or walls including all fittings for fixing complete as required and directed by Engineer-in-Charge.

M&L for earth continuity conductor or main earthing lead 4 mm dia GI or steel wire fixed to wall on batten or recessed or buried in ground or drawn in existing/ new conduit of Item No 60 above all as required at site.

M&L for testing of old earthing using calibrated earth tester & submitting result to engr -in -charge all as directed. Note : (i) Watering of earthing with 30Ltrs water mixed with 20 Kg salt shall be carried out one day before the testing & the cost of the same shall deemed included in unit rate quoted.

M & L for repairing of broken earthing pits chamber (size 0.30 to 0.45 Sqm) with PCC (1:3:6) type C-1 with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, funnel with wire mesh for watering pipe all as directed by Engr-in-charge.

Supply and fixing Electronic Meter 10-60 amps Single phase tamper proof with Class 1 accuracy Optical port,LED Indication for earth leakage ,Elegant Polycarbonate Enclosure,High Surge withstand upto 8 KV ,anti tamper features,Electromagnetic compatible & 6 digit Display. Make L&T Model No.EM101 Cat No. WM101BC7DDH or equivalent in Havells/Jaipuria meters/Secure meters. Note : Old unserviceable Meter will be deposit to MES.

S&F,in repair PVC laminated ISI marked top cover 3 mm including cutting/drilling holes for mounting housing of switches, sockets, etc as per site requirement suitable for following sizes of sunken/TW board. 4”x4” size

-Ditto- all as per Item No 67 here-in-before but 7”x4” size

-Ditto- all as per Item No 67 here-in-before but 8”x6” size

-Ditto- all as per Item No 67 here-in-before but 8”x10” size

-Ditto- all as per Item No 67 here-in-before but 10”x12” size

Disconnecting & Taking down ceiling fan 1200/1400 mm sweep any make from any position and height at site transporating to MES store Yard & dismantling blades opening the stator and rotor of ceiling fan and providing new lubricating, varnishing grease in bearing/bushes, re-assembling, commissioning and testing complete & rehanging fan to site incl providing nuts, bolts, locking bolts, blades screws, split pin, rubber real, PVC connector, washers where required complete all as directed by Engineer-in-charge. Note:- All major repair such as replacement of Bush, bearing , condensor, shaft, connection wire , winding & painting will be measured & paid separately

Supply only ball bearing (No 6201, 6202 & 6203) suitable for Ceiling fan 1200mm/1400mm suitable as per site requirements. Make : SKF, TATA, NBC

M&L for removing of burnt winding from ceiling fan stator of size 1200mm/1400mm sweep and rewinding the same with equal gauge of super enameled copper winding wire, insulating paper, varnishing and testing complete incl transportation to contractor's work shop and bringing back to store and testing complete.

M&L for scraping all foreign materials with emery paper, cleaning the body, blades, legs, frame and down rod (preparatory work) for painting ceiling fan and painting with one coat of supper enameled white paint (spray paint)/grey paint and writing of MES No. with capital letter of size 20 mm height and 03 mm width with synthetic enameled black paint for Ceiling fan 1200mm/1400mm sweep all as directed.

Supply only gun metal bush suitable for ceiling fan as per site requirements complete

Supply only condenser 2.5 MFD with PVC clamp.

Supply & fix PVC canopy of 1200/1400 mm sweep ceiling fan.

Taking down the ceiling fan, remove the existing down rod and provisioning of new down rod made out of GI tubing medium grade as per existing size cutting, threaded and holes drilled both ends (dual arrangement), making holes – 02 Nos for cliping with fan, painting with two coats of synthetic enamel white colour paint including their electric connections complete all as specified and directed. Note- GI tubing will be measured and paid separately under S&F item here-in-after.

Supply only GI tubing 15 mm bore medium grade for fixing in item Serial No 79 above.

S& F GI tubing 40 mm bore medium grade ISI marked for fixing on walls including PCC 1:3:6 type C-1 block 230x230x150 mm for grouting ends of pipe & all fittings for hanging of Ceiling fans complete all as directed.

M&L for fan hook made out of MS flat 50x6 mm suitably shaped to mount on 40 mm dia GI pipe including welding MS bar 10 mm dia half round shaped & necessary nuts & bolts complete all as directed.

S & F in repair of celing fan shaft complete of size 15mm dia & quality as per existing all as directed by Engr-in-charge.

S & F in repair for replacement of U/S stator block made of laminated sheets of size and quality as per existing all as specified and directed by E-in-C

S&F fan blade set (set of three) made out of aluminium sutaible for 1200 mm sweep ceiling fan, as per exisitng size and guage all directed by Engr-in-Charge .

Disconnecting & Taking down Exhaust fan/wall fan/Pedestal fan/ air circulator any make any size from any position at site, transporating to MES store Yard & dismantling blades opening the stator and rotor of fan and providing new lubrication, grease in bearing/bushes, reassembling, commissioning and testing complete & refixing fan to site incl providing nuts, bolts, locking bolts, blades screws, split pin, rubber reel, PVC connector, rubber pad, washers where required complete all as specified and directed. Note:- All major rerpair if found unserviceable such as replacement of Bush, bearing , condensor, shaft, connection wire, winding & painting will be measured & paid separately under supply only items here-in-after

S&F in repair PVC insulated three core 0.5 Sqmm size wire copper conductor 1100 Volt grade complete all as specified and directed.

Material and Labour for removing of burnt winding from Exhaust Fan 9” sweep, rewinding the same with equal gauge of super enameled copper winding wire, insulating paper, varnishing and testing complete incl transportation to work shop and bringing back to store and testing complete.

All as per item No 88 above but Exhaust Fan 12” sweep.

All as per item No 88 above but Wall Mounted Fan 16” sweep.

All as per item No 88 above but Pedestal Fan 16” sweep.

M&L for scraping of Exhaust fan 9" to 16" Sweep all foreign materials with emery paper, cleaning the body, blades, legs, frame and down rod (preparatory work) for painting of exhaust fan/air circulator fan/pedestal fan and painting with one coat of supper enameled white paint (spray paint)/grey paint and writing of MES No. with capital letter of size 20 mm height and 03 mm width with synthetic enameled black paint all as directed.

Material and Labour for making circular holes suitable for fixing of 12” sweep Exhaust fans by cutting the wall of any thickness required circumstances for exhaust of air and including grouting of anchor fastner as per site requirement, bolts and nuts complete including finishing of disturbed surfaces by using cement mortar 1:3 complete all as required at site and directed by the Engineer-in-Charge.

Supply and fixing in repair of wall mounted fan blade suitable for 400 mm sweep fan as per existing complete all as directed by Engr-in-Charge.

S&F exhaust fan MS blade 9” to 12” as per existing complete all as directed by Engr-in-Charge.

S & F in repair for MS front frame suitable for mounting of stays of 9" exhaust fan made out of MS Sheet not less than 1.6mm thick painted with two coat of synthetic enamelled paint over a coat of zinc chrome red oxide primer complete with neccesarry fixing accessories such as nut, bolts washers etc & fixing to wall all as per existing & site requirement as directed by Engr-in-charge.

All as per Item No 96 above but suitable for 12" exhaust fan -do-

S & F in repair for MS stay work (set of 4) suitable for 9"/12" exhaust fan made out of MS strip not less than 20 x 3mm bent to shape complete painted with two coat of synthetic enamelled over a coat of zinc chrome red oxide primer complete with neccesarry fixing accessories such as nut, bolts washers etc & fixing to wall all as per existing & site requirement as directed by Engr-in-charge.

S & F in repair for circular / rectangular framed shutters suitable for 9" exhaust fan made out of MS sheet not less than 1 mm thick for frame & not less than than 0.6 mm thick for shutter painted with two coat of synthetic enamelled paint over a coat of zinc chrome red oxide primer complete with neccesarry fixing accessories all as per existing & as per site requirement & directed by Engr-in-charge.

All as per Item No 99 above but suitable for 12" exhaust fan -do-

S & F in repair of exhaust fan shaft of size & quality as per existing all as directed by Engr-in-charge.

Disconnecting & taking down from position existing defective storage water heater 50 ltr capacity for carring out repairs work such as replacing worn out parts and fixing back in position in replacing the necessary nuts and bolts including painting with two coats of white synthetic enameled paint by spray paint complete all as specified and directed by the Engineer-incharge. Note : All relevant items shall be paid separately on supply only)

All as per item No 102 above but 25 ltr capacity all as specified and directed by the Engineer-incharge.

Supply only safety valve for geyser chromium plated brass 15mm dia all as specified and directed by the Engineer-incharge.

Supply only non return valve chromium plated brass 15mm dia all as specified and directed by the Engineer-incharge.

Supply only Indicator lamp red/green, round/sqare/rectangle for geyser as per site requirement 230V AC all as specified and directed by the Engineer-incharge.

S&F in repair of plug top 3 pin 15/16 Amps capacity

Supply only inner stainless steel dome of geyser of capacity 25 ltrs complete as per sample to match original patterns and shape.

Supply only heating elememt 2000 watt threaded or push type as per the existing one suitable for vertical storage water heater of any size all as specified and directed by the Engineer-incharge.

Supply & fix in repair heating elememt 3000 watt threaded or push type as per the existing one suitable for vertical storage water heater of any size all as specified and directed by the Engineer-incharge.

M & L for vaccum test, pressure test, detecting any leakage and rectifying same, and charging the refrigerant (R-32/410) as per capacity of 1.5 TR Air-Conditioners (Split/Window type) complete all as specified and directed by the Engineer-in-carge Note : Work/Job shall include dismantling/taking down of equipment from any location/position/height, transporting to the work shop and back (if necessary/when directed) and re-installation in same position after catering requisites. Rate quoted shall be deemed to be inclusive of the same and nothing extra whatsoever shall be payable on this account.

All as per item No 111 above but 2.0 TR Air-Conditioners (Split/Window type)

All as per item No 111 above but Water Coolers of capacity 40/80/60/120/150 litres

All as per item No 111 above but Refrigerators of capacity 165/260/280/300/310 litres

All as per item No 111 above but Deep freezer of any capacity

M & L for repairs to base/body/stand of water coolers of any capacity by cutting out rusted portion, replacing same with new MS sheets/stand/part of gauge as per existing, with all necessary fixing arrangements/welding, etc including painting with two coats of synthetic enamel paint and making good the disturbed surfaces of walls, etc complete all as specified and directed by the Engineer-in-charge. Note :- Work/job shall include dismantling/taking down of equipment /stand/base frame, etc from any location/position/height, transporting to the work shop and back (if necessary/when directed) and re-installation on position after catering requisites. Rate quoted shall be deemed to be inclusive of the same and nothing extra whatsoever shall be payable on this account

S&F in repair chasis for 1.5 TR air conditioner window type made out of 2mm thick MS sheet and painting with two coats of synthetic enamel paint including taking down of equipment from any location/position/height, dismantling accessories as required from old worn out chasis and re-installed same after provision of new chasis and connecting up with new wiring, etc including making good the disturbed surfaces of walls, complete all as specified and directed by the Engineer-in-charge.

All as per item No 117 above but 2.0 TR window type air-conditioners

M & L for servicing of air-conditioners 1.5/2.0 TR (spilt/window type) including taking down equipment from any location/position/height, washing cooling coil, condensor coil, base, etc with soda ash, drying with air blower, checking/testing for workability and re-installing in position complete all as specified and directed by the Engineer-in-charge

S&F in repair fan motors for 1.5 TR air - conditioners (spilt/window type), single phase, 230V, 50Hz with fan blade/blower, as in repairs, including any required addition for fixing new motor in old eqipment, necessary testing, connecting up complete all as specified and directed by the Engineer-in-charge for the following: Note :- Work/job shall include dismantling/taking down of equipment /stand/base frame, etc from any location/position/height, transporting to the work shop and back (if necessary/when directed) and re-installation on position after catering requisites. Rate quoted shall be deemed to be inclusive of the same and nothing extra whatsoever shall be payable on this account

All as per item No 120 above but 2.0 TR air - conditioners (spilt/window type)

All as per item No 120 above but Water coolers any capacity

S&F in repair relay for air - conditioners (spilt/window type) complete all as specified and directed by the Engineer-in-charge. Make : USHA/KELTRON/SHRIRAM

S&F in repair remote sensor kit with Manual control pendent, 230V, SP, 50 Hz suitable for split type air - conditioners 1.5 TR/2.0 TR capacity complete all all as specified and directed by the Engineer-incharge

S&F in repair base tray suitable for air - conditioners 1.5 TR/2.0 TR capacity made out of 2mm thick MS sheet as per existing size and painting with two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed by the Engineer-incharge

Dismantling and taking down the existing defective street light fitting of any type and any capacity T-5/LED 36/60W from steel tubular pole, opening the street light fitting, checking the serviceability of spare parts including replacement of defective parts such as drivers, cables, mounting Nut bolts etc after repairing including refixing on pole connecting & testing complete all as directed by Engr-in-Charge. [Note:- Electronic drivers will be measured and paid separately on respective item of Sch 'A' here-in-after].

Supply only 2.5 Sqmm weather proof flat, single core stranded copper conductor cable 1100 Volts grade for connecting street/Security light complete including connection and testing all as specified and directed.

S & F in repair street light fittings in street light poles/Buildings the fitting shall be of LED type 60 Watts complete with and including drivers, pressure die cast aluminium housing, prewired complete. The fitting shalll conform to cat No -ENDURAPEARLPLUSSL60WLED757SASYTOPC of Havells or Equivalent from Wipro/Bajaj

S & F in repair of GI steel tubing medium grade 40 mm dia and length up to 1.5 meter bent to shape of offset angle upto 45 degree for fixing of security /street light fittings including MS clamps made of 32mm x5mm flat iron, nuts , bolts, etc all as directed by Engineer in charge.

S & F in repair Intergral decorative 8 watt LED cone series acts as a imposing street furniture, silent observer, diffuser at the upper portion with IP-65 Protection including fixing and mounting arrangement complete all as specified and dierected by Engr-in-Charge. Make : Havells cat No CONEB8WLED857SSYMTOPC/Crompton/Bajaj.

S & F in repair of LED Driver 70 Watts Suitable for street light fitting, driver Shall Conform to Cat no X075C070V107FNY1BO of Crompton or Equivalent from Philips/Bajaj

S & F in repair of LED Driver 40 Watts Suitable for street light fitting, driver Shall Conform to Cat no S0DQL1-54-700-40Wof Crompton or Equivalent from Philips/Bajaj

S & F in repair decorative 35 Watts LED Post Top Lantern, 230 Volts, including drivers, pressure di cast aluminium housing, prewired complete. The fitting shalll conform to cat No - CORALPT35WLED757PSYMTOPC of Havells or Equivalent from Wipro/Bajaj

S & F in repair decorative 20 Watts LED Post Top Lantern, 230 Volts, including drivers, pressure di cast aluminium housing, prewired complete. The fitting shalll conform to cat No - RUBYT25WLED757PSYMTOPC of Havells or Equivalent from Crompton/Bajaj

Supply & Lay PVC insulated, heavy duty 1100 volt grade electric LT UG cable with aluminium conductor of size 10 Sqmm 2 Core in trenches/along the wall/including takingdown old unsv cable and making all connections complete with lugs as required at site and as directed by Engr-in-Charge.

Supply & Lay PVC insulated, heavy duty 1100 volt grade electric LT UG cable with aluminium conductor of size 10 Sqmm 4 Core in trenches/along the wall/including takingdown old unsv cable and making all connections complete with lugs as required at site and as directed by Engr-in-Charge.

Supply & Lay PVC insulated, heavy duty 1100 volt grade electric LT UG cable with aluminium conductor of size 35 Sqmm 3.5 Core in trenches/along the wall/including takinddown old unsv cable making all connections complete with lugs as required at site and as directed by Engr-in-Charge.

M & L For Taking down of LT XLPE insulated, armoured heavy duty 1100 volt grade electric cable with aluminium conductor of size 2 Core 10 Sqmm to 3.5 Core 35 Sqmm from wall/Roof/steel Structures of buildings/Storgae Sheds etc and refixing the same in position after replacing of cable glands & lugs, Saddles & Spacers all as directed by Enginner incharge. Note . A sum of Rs 78,492.00 towards sch of credit shall be deducted to arrive the contract sum

A P ENTERPRISES

M/s Bhagirathi Electricals

R J ENTERPRISES