Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.8 LAccepted-Finance ASSOLNA SOUTH GOA | SOUTH GOA | GOA | 403802 | ₹18.8 L | L1 | Accepted-Finance low quoted |
| 2 | L2₹20.9 L+₹2.1 L (11.2%)Rejected-Finance | ₹20.9 L+₹2.1 L (11.2%) | L2 | Rejected-Finance high quoted |
| 3 | L3₹21.7 L+₹2.9 L (15.4%)Rejected-Finance | ₹21.7 L+₹2.9 L (15.4%) | L3 | Rejected-Finance high quoted |
| 4 | Rejected-Technical H NO 5 VARCHAWADA SARVAN BICHOLIM GOA | - | - | Rejected-Technical condition not fulfilled |
| 5 | Rejected-Technical | - | - | Rejected-Technical condition not fulfilled |
Tender Value
₹20.0 L
EMD Value
₹40,031
Closing Date
7 Aug 2026, 3:00 pmClosed
Executive Engineer-V
in the office of the Executive Engineer -V, PWD, Altinho Panaji Goa.
Renovation to the existing Government Primary School at Malar for Electricity Department in the view of the development of Koti Tirth Corridor at the site of Shri. Saptakoteshwar at Divar.
2026_PWD_30856_1
PWD/D-V/ASW-I/21/26-27/L02
Open Tender
Civil Works - Buildings
Percentage
30 days
Altinho, Panaji -Goa
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,000
₹40,031
12 Aug 2026
4 Aug 2026
7 Aug 2026
4 Aug 2026
7 Aug 2026
4 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling tiled roofing (mangalore or pot or country tiles) with battens etc. complete including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. | 263.37 | - | 79 | ₹20,806.23 |
| 2 | Dismantling wood work of sectional area 40 sq.cm. and above wrought framed and fixed in frames other frames and trusses including stacking of material within 50 mts. lead (span upto 10 mtrs.) | 4.49 | - | 2,056 | ₹9,231.44 |
| 3 | Providing & fixing colour coated Alluminium (PUF) sandwich panel roofing systems of approved make adhering to Aluminium 3105 grade for top & bottom sheet of thickness 0.40 & 0.35 respectively including PUF insulation betewwn the top & bottom sheet of Denslity 40 (+/-2) Kg/m3 inclusive of S.S. 304 grade self tapping fastneres complete as directed by Enigneer incharge (frame work for roof roof accesorries to be paid seperately) for tile Design PUF roof panel Gutter width should be atleast 25% more than the Crest width. Minimum height at heighest point of Crest should be minimum 65mm. Minimum thickness at anygiven point should not be below 30mm.;PUF Insulated tile roof 30mm thick of trapezoidal design | 263.37 | - | 2,536 | ₹6,67,906.32 |
| 4 | Providing & Fixing Alluminium Barge Board of approved make adhering to Alluminium 3105 grade of 0.71mm thickness & 60 cm wide inclusive of SS304 grade self tapping fastners to match the Alluminium roofing system & as directed by Engineer in charge complete | 82.15 | - | 798 | ₹65,555.7 |
| 5 | Providing & Fixing Alluminium Ridge of approved make adhering to Alluminium 3105 grade of 0.71mm thickness & 60 cm wide inclusive of SS304 grade self tapping fastners to match the Alluminium roofing system & as directed by Engineer in charge complete | 60.9 | - | 798 | ₹48,598.2 |
| 6 | Steel work in built up tubular (round square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923
/Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL TATA. VIZAG JSW APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete. | 5,267.4 | - | 184 | ₹9,69,201.6 |
| 7 | Repairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead.;With cement mortar 1:4 (1 cement : 4 fine sand) | 18.58 | - | 314 | ₹5,834.12 |
| 8 | Removing old paint of polish with paint remover of approved brand & manufacture & preparing surface | 26.28 | - | 11 | ₹289.08 |
| 9 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. | 26.28 | - | 51 | ₹1,340.28 |
| 10 | Removing dry or oil bound distemper by scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 539.38 | - | 22 | ₹11,866.36 |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.60 MB
Tendernotice_2.pdf
PDF • 1.74 MB
BOQ_31260.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .