Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹87.9 LAccepted-AOC | ₹87.9 L | L1 | Accepted-AOC awardee |
| 2 | L2₹96.7 L+₹8.9 L (10.1%)Rejected-Finance | ₹96.7 L+₹8.9 L (10.1%) | L2 | Rejected-Finance Rate offered is higher than L1 |
Tender Value
₹80 L
EMD Value
₹1.6 L
Closing Date
14 Nov 2019, 11:30 amClosed
Chief Executive Officer
Vita Milk Plant GT Road Near Village Sanwala Kurukshetra
CONSTRUCTION OF MILK PLANT BUILDING INCLUDING WATER SUPPLY, SEWERAGE AND ROADS AT GT ROAD VILLAGE SANWALA, DISTRICT KURUKSHETRA
2019_HBC_106294_1
MUK/Tender/NPDD/2019/04a
Open Tender
Civil Works - Buildings
Works
180 days
Vita Milk Plant GT road near Village Sanwala Kuruk
Please refer Tender Document
3 documents required · 3 mandatory
₹1,000
Vita Milk Plant Kurukshetra
₹1.6 L
19 Sept 2020
31 Oct 2019
15 Nov 2019
31 Oct 2019
14 Nov 2019
31 Oct 2019
Surface dressing of area to be developed
Earth work in excavation in foundation trenches
Providing and laying lean concrete 1:4:8 in foundation
Providing & laying RCC 1:1.5:3 in foundation & plinth excluding the cost of reinforcement
Providing & laying RCC 1:1.5:3 in beam in SST including shuttering but excluding the cost of reinforce ment
Providing & laying RCC 1:1.5:3 in beam in SST including shuttering but excluding the cost of reinforce ment
Providing & laying RCC 1:1.5:3 in roof slab
DPC over walls in foundation and plinth
RCC in flooring of new extended hall
150mm thick PCC 1:4:8 over WBM for laying CC Road/ Paver tiles
P/L inter locking paver tiles 65 mm thick as per specifications including fixing edges in cem. Mortar for footpath
P/L inter locking paver tiles 80mm thick as per specifications including fixing edges in cem. Mortar. (Must be ISI Marked as per latest amendment of HSR)
P/Laying concrete 1:2:4 for concrete base for water Tanks
In foundation Brick work and plinth in cem. Mortar 1:6
Brick work in super structure in cem. Mortar 1:6
Tile terracing with brick tiles laid in mud phuska over two coats of hot bitumen covered by mud phuska
Cem. Concrete gola on roof
Providing top Khurras
P/f 150mm dia PVC Rain water pipes along the walls
P/F PVC Bends
Base course for flooring
Screed of 50mm thickcem. Concrete 1:8:16
P/ Fixing wall tiles in dado of size 8"x 12" in toilets
Kota stone flooring
Extra for flooring in steps
Extra for nosing in treads
Kota stone in steps and risers/ skirting
Providing and laying plaster 12 mm thick on inside of walls in cem. Mortar 1:6
Providing and laying plaster 15 mm thick on inside of walls in cem. Mortar 1:6
Cem pointing flush 1:2 on tile terracing
P/laying vertical DPC on outer walls
Applying Priming coat with metal primer on new work including preparation of surface ( Stair Railing)
Painting two coats of ready mixed paint on metal surface
Preparation of plastered surface for oil bound distemper
Distempering with oil bound distemper of approved manufacturer and choice shade
Finishing walls with cem. Based paints of choice shade and approved make
Supplying and fixing Rolling shutters
Providing and laying steel bars FE500 EQR TMT as per design
P/F fan hooks 80cm long
Preparation of sub grade for roads
WBM 230 mm thick laid in two layers
laying jointing and fixing of PVC/GI pipe line for water supply with 20mm dia pipes including all special
Fixing Galvanised Malleable holder bats for rain water pipes on walls
Fixing stop cock 20mm dia of approved make
Making connection to existing line upto 40mm dia
Const. Brick masonary Inspection chambers
Extra for every 0.3 mtr depth
Construction of rectangular standard brick masonary chamber
Lowering SWPipes 150mm dia
Jointing and fixing in SW pipes 150 dia
P/F Gully trap 100m dia
Fixing of water tank including all connections for 5000 litre capacity
Providing circuit wiring with 3 core pvc copper wire
Earthing with tinned copper plate 600x600x3mm including all accessories and providing brick masonary enclosure with cover plates etc.
Wiring with 1.5sqmm PVC Insulated Copper conductor cable in 1.6mmthick conduit pipe for medium length points Fan Points
Light points
light point without control
Call bell point including MS box of size 180x100x60mm deep for call bell.
3-pin 5amp plug point with earthing the third pin
3-pin 15amp plug point with 4sqmm PVC Insulated copper conductor cable including earthing the third pin
P/Fixing modular type accessories of app. Make in existing box including fixing and making necessary connections 10amp. 1 way Switch
20amp. Switch
10amp. Socket
16amp. Socket
bell push
Fan Regulator
Blinking plates
supply and erection of doble door sheet steel enclosure for MCBs and ELCBs recessed in walls including all. 12 way SP&N
8 Way SP & N
P/F GI sheet concealed sheet metal box complete 1 & 2 Modules
3 Module
4 Modules
6 Modules
8 Modules
Supply of earth including loading, transportation, unloading and filling under floors in 15cm layers including spreading, ramming, watering consolidation and cost of earth brought at any distance complete in all respects including lead. Consolidated earth to be measured. )
Suppying 75mm stone metal
Providing 20mm id GI pipe B class for water supply
Providing 150mm dia PVC pipes for storm water and waste water disposal
Laying 150mm dia PVC pipe for storm & waste water
Providing 150mm dia SWP
Providing stop cock 20mm dia
Providing Galvanised Holder bats for 150mm dia pipes
Mandana stone flooring 25mm thick and above in any pattern as specified over 12mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match thee shade of stone including rubbing and polishingasper specification attached
P/ fixing CI grid tiles 30mmx 300mm weighing 5kg in position as per required slope laid over 37mm cement concrete 1:1.5:3 with stone aggregate 12mm and down grade and holes filled with cement concretw 1:1.5:3 with 3mm down aggregate. The tiles fixed shall be han/Machine polished and holes and joints not properly filled should be redone. The entire top surface should be left smooth. No extra charges shall be paid for cutting of CI tiles. The area shall be kept wet for a minimum of 20 days. The tiles to be supplied as per the Pattern /sample approved.
Providing & Fixing of Powder coated Aluminium glazing/ windows in specified windows. The glazing to include Aluminium sections of size 2.25”x1.5”in frames & 1.5”x1.5” in shutters and 5mm thick glass of Saint Gobain/ Modifloat/ Asahi, all necessary hardware including Hinges, stays, bolts etc. The Aluminium section used to be of 12 gauge shell thickness.
Same as above but for doors and partitions as specified . The section of frame be 4"x1.75" and that of door shutter shall be 3"x1.5" and shell thickness of 12 gauge.
Heavy duty floor spring of Ozone/ dorma
Rebarring with Hilti grout 126mm dia 16mmdia
Extra for Mixing ISI marked integral water proofing compound (liquid) in conc as per manufacturer's specifications
Demolition of brick work
Scrapping of roof brick tiles
Demolition of concrete work (Base of Tanks)
Demolition of RCC
Removal of existing shed including removing brick work, RCC , steel columns etc falling in the new proposed construction as per requirement without disturbing the balance shed.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .