HEW 126 Construction of Toe Wall grill fencing, Garden benches, Dustbin, Plantation and all other works contingent thereto in green belt dividing road sector-2and64 and sector-2 along Delhi Mumbai Vadodara expressway Faridabad

[10.1]Providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling. [Through Rate]

[10.10.1]Providing and laying Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 1. 40 mm thick with 20 mm nominal size stone aggregate [Through Rate]

[10.100.2]Cement Concrete 1:8:16 Flooring 2. Cement Concrete 1:8:16 with stone aggregate 40 mm size in foundation and plinth. [Through Rate]

[10.29.2]Providing and laying of chequered terrazzo tiles 20 to 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : 2. Medium shade pigment using 50% white cement, 50% ordinary cement [Through Rate]

[10.57]Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. [Through Rate]

[11.39]Washed stone grit plaster on exterior walls height up to 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately). [Through Rate]

[11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand) [Through Rate]

[11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand) [Through Rate]

[11.62.2]Colour washing such as green, blue or buff to give an even shade : 2. New work (two or more coats) with a base coat of whiting [Through Rate]

[11.68.3]Applying priming coat: 3. With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works [Through Rate]

[11.78]Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. [Through Rate]

[13.28]Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. [Through Rate]

[13.29.2]Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works [Through Rate]

[17.14.1]Granular Sub-Base with Close Graded Material - (Table:- 400-1) Plant mix method Construction of granular sub-base by providing Material as per Grading III (Table 400-I of MORTandH 5th revision) mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per technical clause 401 of MORTandH specifications 1. Grading I material [Through Rate]

[17.6]Construction of Embankment with Material obtained from Borrow pits NA Construction of Embankment CBR 8% (for new road/ raising/ berms/ etc.) with approved material obtained from borrow pits, including compensation of earth with all lead and lift transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2, as per technical clause 305 of MORT&H specifications. [Through Rate]

[17.8.1]Compaction 1. Extra for laying earth/fly ash as per specifications in 20 cm layers and dressing but excluding the cost of rolling [Through Rate]

[2.B0045] B0045. Welding by electric plant [Rate]

[2.B0749] B0749. Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm [Rate]

[2.RM079] RM079. Earth Cost or compensation for earth taken from private land [Rate]

[26.1]Supplying and stacking at site of work well-decayed farm-yard manure from any available source, approved by the Engineer-in-charge including screening through sieve of I.S.designation 16 mm with 5 km lead. [Through Rate]

[26.10]Maintenance of fine grass lawn for one year including fertilizer application, DAP @ 20gm/sqm, urea 40gm/sqm, watering, weeding, top dressing with good earth and manure mixture 2:1 @ 0.01cum per sqm, maintaining fine level, regular mowing and removal of rubbish with all lifts and leads. [Through Rate]

[26.13.3]Digging holes in all kinds of soil, and refilling the same, with the excavated earth, mixed with well decayed farmyard manure (cost of well decayed farm yard manure to be paid separately) 3. Hole 0.75 metre dia and 0.75 metre deep [Through Rate]

[26.13.4]Digging holes in all kinds of soil, and refilling the same, with the excavated earth, mixed with well decayed farmyard manure (cost of well decayed farm yard manure to be paid separately) 4. Hole 0.60 metre dia and 0.60 metre deep [Through Rate]

[26.14]`Supplying and planting in prepared pits and watering, healthy , vigorous growing , permanent trees including ,application of 10 ml chlorpyriphos 20% EC, planting desired disease free, 200 cm to 220 cm height ,5 cm to 6 cm calliper size stem , full of foliage ornamental tree sapling each to be supplied in 30cm x 30cm poly bags, ` [Through Rate]

[26.18]Supply and planting of disease free healthy , vigorous growing more than 75 cm height permanent shrubs in already prepared pits, supplied in 25 cm x 20 cm poly bags , application of 10 ml chlorpyriphos 20% E.C. termiticide each and watering supplied through the tractor tanker. [Through Rate]

[26.58.1]Supply and installation of garden bench 1. Chair type garden bench with L-shaped sides made of reinforced concrete (M30), thickness 100 mm, overall height 1000 mm, base width 620 mm. Back and seat shall consist of 5 Nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. Seating height of the bench shall be 450 mm. The bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation. All materials required to be as per BIS specifications. [Through Rate]

[26.76]Providing and fixing pair of Plastic dustbins 100 litre volume each, of two different colours, for dry and wet waste, made of virgin plastic to be mounted on MS rectangular hollow section 50 x 25 x 3 mm frames pivoted on 3 MS square hollow section verticals, 1 m above ground, one 35 cm RHS welded to each vertical member at base and grouted in 180 x 40 x 30 cm 1:2:4 cement concrete. [Through Rate]

[3.1.2]By Mechanical Transport including loading, unloading and stacking 2. Earth [5km]

[4.12.1]Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. 1. All kinds of soil [Through Rate]

[5.7.4]Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 4. In cement mortar [Through Rate]

[6.1.2]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) [Through Rate]

[6.29.1]Centering and shuttering including strutting, propping etc. and removal of form work for : 1. Foundations, footings, bases for columns [Through Rate]

[6.8.3]Providing and laying damp-proof course with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) 3. 25 mm thick [Through Rate]

[7.20.2]Brick work with common burnt clay modular bricks of class designation 10.5 in foundation and plinth in: 2. Cement Mortar 1:6 (1 cement : 6 coarse sand) [Through Rate]

[7.21.2]Brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 2. Cement mortar 1:6 (1 cement : 6 coarse sand) [Through Rate]

[7.27.2]Half brick masonry with common burnt clay non-modular bricks of class designation 10.5 in foundations and plinth in : 2. cement mortar 1:4 (1 cement : 4 coarse sand) [Through Rate]

[9.33]Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( plus 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. [Through Rate]

NS Item -Air Swing: Providing designing and fixing of Air Swing pair of size 1200x900x1580 mm fabricated with main post of 140mm dia and other pipes of 50mm dia and 40x60mm dia 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick .

NS Item -Horse Rider Station : Providing, designing and fixing of Horse Rider Statin of size 1200x4600x1300mm fabricated with main post of 140mm dia and other pipes of 50 mm dia and 42mm and 32mm dia with 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick .

NS Item -Air Walker : Providing, designing and fixing of Air Walker of size 1140x450x1560 mm fabricated with main post of 140mm dia and other pipes of 42 mm dia and 40x60 mm dia 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick .

NS Item -Sit Up Station: Providing, designing and fixing of sit up station pair of size 1350 x1370x 700 mm fabricated with main post of 140mm dia and other pipes of 50mm dia and 32 mm dia 3.2 mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick .

NS Item -Leg Press : Providing, designing and fixing of Leg Press pair of size 1940x520x1450 mm fabricated with main post of 140mm dia and other pipes of 60 mm dia and 32 mm dia and 40x60 mm dia 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100- 130 micron thick .

NS Item -Analysis of rate for providing and fixing of water supply connection with road cut in the parks/green belt.

NS Item -Pull chair : Providing, designing and fixing of Pull chair pair of size 1920x760x1950 mm fabricated with main post of 140mm dia and other pipes of 60 mm dia and 50 mm dia and 42 mm dia and 32mm dia with 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick .

NS Item -Stair stepper : Providing, designing and fixing of Stair stepper pair of size 900x900x1580 mm fabricated with main post of 140mm dia and other pipes of 60 mm dia and 50 mm dia 32mm and 40x60mm dia with 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick .

NS Item -Elliptical Exerciser : Providing, designing and fixing of Elliptical Exerciser pair of size 1000x560x1600 mm fabricated with main post of 140mm dia and other pipes of 60 mm dia and 42 mm dia and 32 mm dia and 94mm x 47 mm dia and 40x60mm dia with 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100- 130 micron thick

NS Item -Rowing Machine: Providing, designing and fixing of of Rowing Machine size 1350x800x900 mm fabricated with main post of 140mm dia and other pipes of 50mm dia and 42mm dia and 32mm dia and 40x60mm dia with 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick

NS Item -ANALYSIS OF RATES FOR PROVIDING AND FIXING OF RUBBER HOSE PIPE 1” DIA DOUBLE THREADED and DOUBLE PLY 1ST MARKED and KG.1/CM/2

NS Item -Arm wheel : Providing, designing and fixing of Arm wheel pair of size 1100x800x1730 mm fabricated with main post of 140mm dia and other pipes of 60 mm dia and 32 mm dia with 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick .

NS Item -knee Chair: Providing, designing and fixing of of knee Chair size 650x600x1000 mm fabricated with main post of 140mm dia and other pipes of 60mm dia and 50mm dia and 32mm dia with 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick

NS Item -Exercising Bar : Providing, designing and fixing of Exercising Bar pair of size 1820x620x1700 mm fabricated with main post of 140mm dia and other pipes of 42 mm dia and 40x60 mm dia 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick .

NS Item -Twister: Providing, designing and fixing of Twister of size 1500x1500x1450 mm fabricated with main post of 140mm dia and other pipes of 60mm dia and 50mm and 32mm dia with 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick

NS Item -Seated Chest : Providing, designing and fixing of Seated Chest pair of size 1730x760x2200 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 60 mm dia and 50mm dia and 42mm dia and 32 mm dia and 40x60 mm dia 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick

NS Item -Double Cross Walker: Providing, designing and fixing of Double Cross walker of size 1600x560x1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 60 mm dia and 50mm dia and 32mm dia and 40x60 mm dia 3.2mm thickness all pipes / ms part made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick

NS Item -Analysis of rate for providing and fixing of water supply connection without road cut in the parks/green belt.