8907 REPAIR TO WALL PANELLING ROOF TILES WOODEN FLOORING PLASTERING AND OTHER WORK AT ND MUMBAI UNDER AGE BR I NW KUNJALI

Amount

Dismantling of boarding, any description, fixed in any position with nails complete all as specified and as directed by EIC

M&L for 2nd class hard wood 25mm thick boarding planed one side and edged tongued and grooved or rebated in floor and skirting complete all as specified and as directed by EIC.

M&L for providing PVC wall paneling consisting of PVC insulated panels having wall thickness of 5mm PVC sheet of density 600 Kg/Cum manufactured by an ISO 9001-2015 certified company and the desired thickness of expanded polystyrene (EPS) (depends on the insulation required) screwed in the wall using screw of adequate length. The screw shall be placed at a distance of 150 mm and shall be 25mm from the edge of insulated panel on all four sides of the panels. The PVC strip of 5mm thick PVC sheet of width 75mm feathered at the edge shall be stuck using solvent cement adhesive at the places where two panels are joined, so as to cover the screw of both the panels, using solvent cement. 90 degree heat bent strips of 5mm thick PVC sheets of width 75mm x 75mm feathered at the edges shall be stuck at wall joints pillars etc complete all as specified and as directed by EIC. Make : Rajshri or equivalent

Dismantling Mangalore pattern roofing tiles incl ridge with ceiling tiles or slate roofing as directed by EIC.

M&L for Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed.

M&L for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and as directed.

M&L for dismantling boarding/ wooden flooring, any description, fixed in any position in floor or with nails & screw complete all as specififed and as directed.

S&F in repair for 8mm thick wooden flooring laid down over necessary apung/ polythene complete all as specified and as directed. (Make : Hego/pergo)

S&F in repair for 8mm thick wooden skirting complete all as specified and as directed. (Make : Hego/pergo)

Dismantling Plain or corrugated steel sheeting/ AC sheet, any gauge, thickness, including Nainital or similar pattern roof coverings

S&F in repair pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified & as directed by EIC.

S&F in repair prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour as in ridge having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for 1.50mm thick galvanised steel sheet as in valley gutter fixed with rivets with MS strip including clamp in both sides (MS clamp in MS flat iron patti or equivalent) or other suitable arrangement over MS bracket trapezoidal shape of required profile with desired slope etc complete all as specifided and as directed by Engr-in-Charge.

Dismantling wrought iron or mild steel works of any description work etc.

M&L for framed work of Fe 410 W (Grade E-250) quality B as in gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortat bedding but not backing, removing serviceable tiles to store and rubbish off the premises.

M&L for PCC 100mm thick type D-2 (1:4:8) using 40mm graded stone aggregate as in sub base all as specified and as directed.

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified.

M & L for Coloured glazed ceramic tiles in vertical surface area of tiles n exc 0.18 Sqm thick with and including 10 mm thick cm (1:4) backing coat and Triangular filleting at top of skirting, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles.

All as per item No 20 above but in skirting/ verticle surface including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (without using extra cement) complete all as specified.

Supply only water profing compound.

All as per item No 22 above but 10 mm thick in CM (1:3) on ceilling.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth (without using extra cement) incl WPC @ 3% by weight of cement complete all as specified. Note : WPC will be measured & paid separately.

M&L for preparation of newly plastered wall surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint on wall/roof including necessary scaffolding complete all as specified and directed

M&L for preparation of old wall surfaces of any description & applying one coat of acrylic (antifungal) exterior grade paint on wall/roof including necessary scaffolding complete all as specified and directed

M & L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant primer over 3mm thk wall care putty on plastered surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed by Engr-in-Charge.

M&L for preparation of old wall surfaces of any description & applying one coat of oil bound distemper paint on wall/roof including necessary scaffolding complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for preparation of old wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete.

S & F perforated vinyl graphiscs stickers having departmental logos fixed on glass made from 3 M make.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for

M & L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in roof/chajja padding for maintaining slope of roof/chajja complete all as specified and as directed

Taking down chowkats or frame with shutter ( without taking off shutter from frame) , n exc 1.5 sqm each complete all as specified.

Taking down chowkats or frame with shutter ( without taking off shutter from frame) exc 1.5 sqm but n exc 4 Sqm each complete all as specified.

Taking down and refixing of shutter in same opening after rescuring or easing and adjusting in the same opening of any description n exc 1 Sqm each complete all as specified and as directed.

Taking down and refixing of shutter in same opening after rescuring or easing and adjusting in the same opening of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing (Colour and texture shall be as directed by GE/EIC.

S&F factory made prelam (single side) PVC Door Frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening complete all as per specification and as directed by EIC.

S&F 200 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F 100 mm size aluminium alloy handles, fabricated type extruded section, ISI marked all as specified.

S&F aluminium anodized barrel tower bolts 150 mm of extruded section.

All as per Item No 44 above but 75 mm.

S&F Door closer hydraulically regulated, designation No. 3,universal type, extruded aluminium body, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

Dismantling granite flooring/ door and window cills including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises.

M&L for 20 mm thick granite machine cut as in steps, window cills, door cill ,cooking platform, working table etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. (colour of granite will be approved by the GE/Engr-in-Charge).

Dismantling false ceiling/boarding any description fixed in any position with nails.

M&L for false ceiling made out of 600 x 600 x 4 to 6 mm thick ceiling board/tiles deep panel suspensor system made out of powder coated GI sheet main Tee of size 23.50 x 40 x 0.63 mm and cross tee of size 23.50 x 23.50 x 0.63 mm and angle size 19 x 19 x 0.63 mm including 3 mm GI wire for supending bolts necessary washers nut/cleats/pin hook etc for securing frame work to ceiling to the snap grid including provn of necessary holes/cutting for providing light/far as required including making necessary recesses/projected pattern complete all as specified and as directed (Make -Armstrong/Chanakya/Everest).

M&L for POP false ceiling using 600 x 900 x 12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work main joist of size 50 x 25 mm spaced at 750 mm centre, secondary joist of size 75x20 mm fixed to main joists spaced t 900 mm suspended to roof members using 25 x 25 x 2 mm GI angles and fasteners @ 1.2 m C/C including decorative design/pattern all as specified and directed Engr-in-Charge.

M&L for PCC 1:3:6, type C2 of 75mm thick as in plinth protection etc complete

S&F in repair for oval shaped coloured vitreous china WHB table top fancy type of overall size 595 x 380 mm, cat No 7751 of cera or of equivalent make specified here-in-after including 32 mm CP waste coupling, PVC waste pipe etc complete, including granite slab counter of black colour as approved and of size 1.20mtr x 0.60 mtr includingrounding edges etc com cutting nitches rounding edges etc complete, horizontally supported by 01 No of 35 mm thick cuddappa stone slab one side mirror polished and vertically supported by 02 No 35 mm thick complete all as specified and directed by Engr-in-Charge.

S&F PVC box type cabinet of approx size 35 x 40 x 12 cm with 3mm thick mirror mounted on shutter, with PVC shelves 2mm thick and outer frame having 4mm thickness fixed in existing opening with wooden plugd including taking down existing of (make :- Prayag/Nilkamal/Shakti).

Removing debris exc. 1.50 Km but n exc. 25 Km and depositing where directed, in soil outside MD land.

jalandhara construction

Nilesh Construction

PRABHU ASSOCIATES

Genius Construction Co.

Anil Industrial Corporation

sai construction

Joy builders