SPECIAL REPAIR TO BLDG NO 83 P (OFFICE COMPLEX), BLDG NO 69 (OTM AT FD REGT) AND BLDG NO 192 (COOK HOUSE) UNDER AGE B/R-IV OF GE(SOUTH) MEERUT CANTT

Amount

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth in soft/ loose soil for foundation n.exc 10 Sqm on plan, including levelling of bottom surface to required level getting out complete all as specified and directed.

Removing excavated materials to a distance not exc 50 m and deposited where directed at a level not exc 1.5 m above the starting point all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25cm thick in soft / loose soil complete all as specified and directed.

Material and labour for providing formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; chajjas and similar work not exc 200mm thick; rough finished surfaces of concrete flat complete all as specified and directed.

Material and labour for from work to the edge of concrete flat n.exc 200 mm thick , rough finished surfaces of concrete flat complete all as specified and directed.

Material and labour for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Material and labour for providing reinforced cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregates) in roof slabs supported on complete all as specified and directed.

Material and labour for brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Material & labour for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed.

Material & labour for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or stone masonry surfaces, finished even and smooth without using extra cement including WPC complete all as specified & directed. Note- WPC shall be measured and paid separately.

Material & labour for 20 mm thick rendering in cement mortar 1:4 on surfaces of roof mixed with water proofing compound as per manufacturer's instructions surface, finished even and smooth without using extra cement including WPC complete all as specified & directed. Note- WPC shall be measured and paid separately.

Material and labour for rendering 5 mm thick in cement mortar 1:3 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for coloured joint free non skid ceramic tiles 7 to 8 mm thick, (square / rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in vertical surfaces etc, set and jointed in neat cement slurry and pointed in white or coloured cement s to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and and directed

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick, (square / rectangular) area of each tile exc 0.18 sqm but n.exc .38sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and and directed

Material and labour for light shade vetrified ceramic tiles 10 mm thick, (square / rectangular) polished area of each tile n.exc 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and and directed

Material and labour for light shade vetrified ceramic tiles 10 mm thick, (square / rectangular) polished area of each tile exc 0.36 sqm in vertical surface etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:4 complete all as specified and and directed

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick, (square / rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and and directed

Material and labour for cloured Glazed ceramic tiles in vertical surfaces 350x250x7mm / 450x300x7-8mm thick set and jointed in neat cement slurry and pointed in white or cloured cement to match over and including 10mm thick rendering in CM (1:4) on fair faces of brick or concrete surface complete all as specified and directed.

Material and labour for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) in path /plinth protection, finish cement concrete surface even & smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plaster surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Material and labour for preparation of newly plastered surface of wall etc and applying two coats of oil bound distemper including one coat of primer over and including 1mm thick wall putty to prepare smooth surfaces complete all as specified and directed.

Material & labour for cleaning of concrete surfaces and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed by evenly a tack coat @ 1.20 kg per Sqm using with 85/25 grade industrial bitumen, over it laid with APP modified polymeric water proofing membrane with non-woven polyester reinforced of weight not less than 3.60 kg per Sqm unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.200 kg per Sqm as per manufacturer’s instructions complete all as specified and directed.

Supply and fix 30 mm thick flush shutters, solid core construction, with particle board core and plywood facepanels, commercial type on both sides, complete all as specified and directed.

Material and labour for gauzed shutter made out from mild steel "U" frame 35x35x5mm, 25x25x5mm and 1.5 mm thick as shown on drawing, the frame for shutter shall be of pressed steel and 10 mm square bars grill complete with fly proof stainless steel wire mesh having 0.63mm nominal dia wire and 1.4 mm average width of aperture including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fix pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates, etc profile of frame 125x60mm made out of 1.25 MS sheet including one shop coat of primer complete all as specified and directed.

Supply and fix pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates, etc profile of frame 105x60mm made out of 1.25 MS sheet including one shop coat of primer complete all as specified and directed.

Material and labour Mild Steel angle iron door frame 40mm x 40mm x 6mm conforming to Fe-410-0 incl 12mm dia deformed bars for strengthening at bottom of chowkhats including cutting floor at bottom to accommodated strengthing bars & making good the floor in PCC 1:2:4 type B-0 to match the existing floor complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC, ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 174 of SSR 2020 (Part-II) complete all as specified and directed.

Supply & fix 125mm size aluminium alloy handles, cast type, anodised complete all as specified and directed.

Supply & fix 200mm long aluminium anodized barrel tower bolts of 10mm dia stove enamelled black with bright bolt fixed complete all as specified and directed.

Supply and fix 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Supply and fix MS 150mm size helical door spring including roller and plate fixed with screws to wooden or welded to iron chowkat complete all as specified and directed.

Supply & fix steel window box type using ERW 'P' section comprising double frame for gauged and glazed skeleton shutter jointed internally with flat iron 40x3mm all arround the complete frame including iron mongry etc complete including hinges, handle tower bolts stops, lugs etc all as shown on drawing Note (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit .

Supply & fix steel window or ventilators fixed type wire guage and top hung glazed shutters with glazing bars complete all as specified and directed.

Supply & fixing mild steel framed work such as grills or framed guard bars with end of bars shouldered or reveted or forged into spike, and similar articles conforming to Fe 410-0 or Fe 310-0 complete all as specified & directed.

Supply and fix bib taps, cast copper alloy chromium plated ,long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

Supply and fix vitreous china wash hand basin, white, flat back of size 550x400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets and CP brass waste coupling complete all as specified and directed.

Supply and fix angular valve , 15mm dia, cast copper alloy, chromium plated fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions all as specified and directed.

Supply and fix in repair rotational moulded polyethylene water storage tank triple layers(cylindrical, vertical with closed top) 500 litre capacity hoisted and fixed in position complete all as specified and directed.

Supply and fix in repair PVC low level duel flushing cistern 9-10 Ltr capacity white with inlet, ball valve, float , handle ,brackets and 32 mm dia PVC flush pipe for low level cistern complete all as specified and directed.

Supply and fixing in repair 15mm bore, GI tubes medium grade, galvanised, with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply and fixing in repair 20mm bore, GI tubes medium grade, galvanised with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply and fix 3 mm thick plain sheet glass ordinary quality and glazing with oil putty / beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

Supply and fix in repair 3 mm thick sheet glass frosted type ordinary quality and glazing with oil putty / beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

Supply and fix in repiar galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples including necessary beadings complete all as specified and directed.

Supply and fix butt hinges 100mm size, stainless steel heavy quality incl necessary screws complete all as specified and directed.

Supply and fixing in repair PVC connections of 450mm long suitable for 15mm dia iron pipe incl PTMT nuts complete alll as specified & directed.

Supply and fix in repair 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe fixed complete all as specified and directed.

Material and labour 75mm thick cement concrete 1:4:8 type D-2 using (40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

Material and labour 25mm thick cement concrete 1:2:4 type B-0 using (12.5 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

Supply and fix in repair pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix in repair pre-painted galvalume aluminum zinc coating GI based corrugated sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for chequered cement concrete tiles 300mmx300mmx25mm thick with grey cement and no pigments , set, jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply and fix vitreous china wash down water closet pan (Padestal Pattern) white, with 'P' of 'S' trap including connection to trap and cistern and flush pipe excluding flushing cistern) including PVC white seat cover, closed pattern fixed with aluminium hinging device and making good to disturbed surface of floor, fixed as in repair complete all as specified and directed .

Taking down of chowkhats or frame with shutters without taking off shutters from the frames exc 1.50 Sqm & n exc 4.00 Sqm each complete all as specified & directed.

Taking down of chowkhats or frame with shutters without taking off shutters from the frames n.exc 1.50 Sqm each complete all as specified & directed.

Taking down shutter of any description exe 1 Sqm and n.exc 2 Sqm each complete all as specified & directed.

Taking down shutter of any description exe 2 Sqm each complete all as specified & directed.

Supply and fix anodised aluminium frame for doors, windows ventilators with one or more rebates including joint cleat for fixing etc complete all as specified and directed.

Supply and fix in repair floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, with overall length of cover plate as 140mm long, complete all as specified & as directed by Engr-in-Charge.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Supply and fix mild steel flat iron as in wind ties including cutting drilling holes and securing bolts confirming to Fe-410 Gde-310 complete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

Demolition of cement concrete in ground floors and paving n.exc. 15 cm thick (below or above ground level) complete all as specified & as directed .

Material and labour for machine cut kota stone slab flooring incl 15-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete laid over and including screed bed or bedding layer of mortor 15mm thick for laying floor finishes in CM 1:6 complete all as specified & directed.

Material and labour kota stone slab 15-20mm thick in riser of teps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including CM 1:4 all as specified and directed.

Material and labour for preparation of new wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats synthetic enamel paint over a coat of pink primer on new wooden surfaces complete all as specified and directed .

All as per item No 68.00 above but on steel surface over a coat of red oxide primer complete all as specified and directed.

Material and labour for writing letter or figures (block, italic or indian) not exc 30cm high complete all as specified and diriected.

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.complete all as specified & directed.

Supply and fix for anodised aluminium doors shutters without sash bars, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, aluminum snap beading screws with lock and key for locking including figured glass 5 mm thick pin headed type etc, complete all as specified and directed.

Supply and fix for anodised aluminium doors shutters without sash bars, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber packing, aluminium snap beading screws suitable anodized fittings such as hinges, handles, including anodised aluminium frame with one or more rebates including supply and fix 5 to 6mm thick black glass all and aluminium grill fixed to frame complete all as specified and directed.

Material and labour anodised aluminium window and ventilator shutters, side hung type without sash bars aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stay 150mm long (1 No) hinges type B-21 100 mm long (2 No) suitable handle (1 No) complete and including figured glass, 5mm thick, pin head type complete all as specified and directed.

Material and labour anodised aluminium window and ventilator shutters, side hung type without sash bars aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stay 150mm long (1 No) hinges type B-21 100 mm long (2 No) suitable handle (1 No) complete and including galvanised mild steel sire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

Material and labour cement concrete type B-1(1:2:4) using 20mm graded brocken stone aggregate as coping, benching, cills, lintles up to 1.5 Mtr clear span, filling around hold fast, fitting in chowkhats etc complete all as specified and directed.

Material and labour for three coats of white washing on new ceiling/chajja sufraces including preparation of new surfaces complete all as specified and directed.

Material and labour for two coats of white washing on oldceiling/chajja sufraces including preparation of new surfaces complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed.

Supply and fix in repair harrison rails mild steel curtain rod chromium plated including brackets , stopes, rollers complete of approved quality complete all as specified and directed.

Material and labour for preparation of old painted surface of wood and wood based materials of any description over 10cm width or girth and applying one synthetic enamel paint complete all as specified and directed .

All as per item No 81.00 above but on steel surface complete all as specified and directed.

Material and labour for preparation of old/undecorated surface and finishing the surfaces of wall with birla/JK wall putty and applying two coats of cement base paint of any colour complete all as specified and directed.

Material and labour for preparation of old/undecorated surface and finishing the surfaces of wall with birla/JK wall putty and applying two coats of oil bound distemper of any colour complete all as specified and directed.

Material and labour for repairs to anodised aluminium partitions (upto 10Sqm) and make it serviceable condition including necessary joining cleats, glazing clips, ruber neoprene packing, snap beading,screws, complete all as specified and directed.

Demolition of brick tiles or terracing tiles, single layer on roofs all as specified and directed.

Supply and fix plastic seat cover water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

Supply and fix in repair cast iron body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Taking down roof trusses, purlins and coupled faters or trussed beams up to 4 Mtr complete all as specified and directed

Material and labour for mild steel work as in framed work in roof trusses ( framed ) , purlin, rafter , fastening , distance pieces, cleats etc (incluidng fixing independently vertical post) complete all as specified and directed.

Material and labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade wih grey cement & pigment laid over and including 25mm thick sand cushioning bed complete all as specified and directed

Supply and fix insulated PVC wall lining consisting of PVC insulated panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing as shown on page No 180 of SSR 2020 (Part-II) thickness of insulated PVC wall lining 12mm including dismantling of boarding of any thickness or description all as specified and directed by Engr-in-Charge.

Dismantling of ceiling boards of any description and any thickness including cover fillets complete all as specified and directed.

Material & labour for provision of GI frame work(snap grid) suitable for size as in false ceiling of size 605mmx605mm consisting of followings and all as directed:-i) Aluminium sections incorporated in frame work shall conform to designation 63400 given in IS: 737-1986. ii) The snap grid shall consist of aluminium anodized main /cross tee of size 36.5mmx25mmx1.4mm thick and 25mm x 25m x1.4mm thick, respectively. iii) Snap grid frame shall be fixed to ceiling with and including supporting hangers consisting of 4mm dia mild steel GI wire. iv) The main and cross tees shall be jointed at junction/crossings with aluminium anodized angle bracket, of size 15mmx15mmx1.5mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer’s instructions. v) The snap grid (main/cross tee section) shall be supported at ends all along the wall with aluminium anodized angle of size 25mmx25mmx1.4 m anodized m thick. vi) Size of the snap grid shall be 605mm by 605mm. vii) Minimum average thickness of anodizing shall be 15 micron complete all as specified and directed

Supply and fix 4mm thick gypsum board withn aluminium coating on back side in ceiling size 60cm x 60cm fixed to aluminium snap grid complete as per manufcturer's instructions complete all as specified and directed.

Material and labour for 14 to 16mm thick Udaipur Green Stone, polished (table rubbed and polished) as in jambs, window cills, cooking platforms and the like, bedded over and including 20 mm thick screed in in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of stone, including rounding of edges and drilling hole for gas pipe complete all as specified and directed.

Taking down carefully any type of battens or conduit point wiring with batten / conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed .

Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly for One tube light/Bulb/Bell/ street light point controlled by one, one way switch 05/06 Amps complete all as specified and directed.

All as per serial item No 98.00 above but for one ceilling fan/exhaust point controlled by one, one way switch 05 / 06 Amps.

All as per serial item No 98.00 above but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 98.00 above but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 98.00 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board.

Supply and fix in repair switch piano flush type, 05/06 Amp single pole, one way 240 volts complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair socket outlet 5 pin, 05/06 Amp flush type 240 volts complete all as specified and directed.

Supply and fix socket outlet 3 pin, 05/06 Amp and 3 pin 15/16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed .

Supply & fixing switch piano, flush type, 15 / 16 Amps, single pole, one way, 240 volts complete all as specified & directed.

Supply and fixing steped type electronic fan regulator flush type on the existing sheet etc. AC, 230 volts with and including connector complete all as specified & directed by Engineer-in-Charge

Supply and fixing lamp holder, PVC /polycarboante type back plate suitable for batten fitting complet complete all as specified and directed.

Supply and fixing LED lamp 9 watt Make Crompton Cat Part No LED 9W-B22-WW or equivalent in Phillips havells

Supply and fix LED tube light fitting 9/10 watt surface mounted, with extruded polycanbonate, integrated lamp & dirver, with opal diffuser and decorative end plates complete with all acessories alll as specified and directed by Engr-in-Charge. Makes Havells Cat Part No LUMELINEBS9WLED865SPCWH or equivalent in Crompton/Surya

Supply and installed LED security light fitting 1x30 Watt luminaries with pressure die cast aluminium housing comprising high power LEDs enclosed with lens embedded PC cover with LED driver complete IP 65 protection complete all as specified and directed. Make- Crompton Cat Part No-LSTS-25-CDL-M or equivalent in Havells/Phillips.

Supply & fixing of ceiling rose 3 terminal PVC / poly carbonate, isolated body complete all as specified & directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 12 way, with 200 Amp rated copper bus bar and IP-43 protection with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer-in-Charge.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amp rated copper bus bar and IP-43 protection with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer-in-Charge.

Supply and fixing sheet metal enclosure double door, tripal pole and neutral, AC, 240 volts, 4 way, with 200 Amp rated copper bus bar and IP-43 protection with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer-in-Charge.

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 4core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc including taking out old unserviceable complete all as specified and directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 2 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc including taking out old unserviceable complete all as specified and directed.

Supply & fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 32 Amps MCB, single pole, AC 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed .

Supply/laying and fixing 40 mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

Material and labour for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling and hard punning complete all as specified and directed. Note- Punned thickness shall be measured and paid as 0.18mtr

Material and labour for contineous brick edging with width equal to the length of the brick of whole sub class 'B' bricks laid on edge for protection of cable complete all as specified and directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed. (Note- After completion of work if desired result of earthing is not obtained the earthing shall be redone without any extra cost to Govt.)

Supply and fixing LED bulk head light fitting wall mounted with inbuilt edge lit LED lamp 10 Watt, complete with all acessoires all as specified and directed. Make :- Havells HEXAFT10WLED857SSYMBOPC/Crompton/Wipro/ Bajaj

Material and labour for sub main wiring with 2x6.00 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS cable with and including continuous earth wire of size 6.00 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note : One meter of conduit along with 2x6.00 sqmm wire and one 6.00 sqmm earth shall be measured as one unit length )

Material and labour for sub main wiring with 4.00 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS cable with and including continuous earth wire of size 4.00 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note : One meter of conduit along with 2x4.00 sqmm wire and one 4.00 sqmm earth shall be measured as one unit length )

Supply and fix decorative LED batten 20 Watt aluminium housing integrated type compete with all accessories and fixing material all as specified and directed. Make :- Havells Model No- PHOTONULTRAE2.01213TL20WLED865SPC+STREAKT8UPT01x22WSSBSWH OR equivalent Crompton/Wipro/Surya

Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white/colour washing/distempering etc to match the existing surfaces complete all as directed .

Supply and fixing in replacement of wall mounted polycarbonate fancy light suitable for 10 watt LED bulb complete all as specified and directed Make :- Phillips/Havells/C&S/Surya /Bajaj/Crompton

Taking down unserviceable sub main / service main wiring including all cutting/chases etc in wall, making good to walls etc including two coats of white/colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified and directed.

Supply and fixing vertical loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with and including 100 Amp MCCB, 4Pole, 16kA with adjustable thermal and magnetic setting suitable to fix in VTPN DB and having provison for fixing of 1 No MCCB 4P as Incomer and 12 Nos MCB SP inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one complete all as specified and directed.

Supplying and fix in repiar for recess mounting LED 2X2 luminaire 34/36 W CRCA powder coating housing with anti-glare diffuser new deep back lit panel metallic frame, including all acessories all as specified and directed by Engr-in-Charge. Make-Havells Model No- PLANO or equIvalent make in crompton/ Phillips/Surya

Supply & fix MCB 4 Pole 'B' series 100 amps capacity AC 415 V, 10kA complete all as specified and directed .

vibha associates

M/S YAVAV CONSTRUCTION CO.

Rajneesh Jain

Jay Ambay Enterprises