PROVN OF MP POST AT ITARANA CANTT AND PROVN OF TRG SHED OF 19 JAT AT ITARANA MIL STN

Amount

Excavating over areas, n exc 1.5m deep & getting out in soft / loose soil complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified & directed.

Removing excavated material not exc 50 meter and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified & directed.

M&L PCC (1:4:8) Type D2 (using 40 mm graded stone aggregate) as in foundations, filling and mass-concrete complete all as specified & directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 mean radius, built in CM (1:6) complete all as specified & directed.

Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified & directed.

M&L 75 mm thick PCC (1:3:6) Type C-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified & directed.

M&L 25mm thick PCC (1:2:4) Type B-0 (using 12.5mm graded stone aggregate) as in sub base of floors complete all as specified & directed.

M&L coloured Non skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm, as in floors etc., laid over with and including 15 mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

S&F readymade Dholpur stone post of size 1.50 x 1.50 mtr, height - 2.10 mtr and chatri of size1.10 mtr height and 1.10 (dia) complete all as directed by Engr-in-Charge.

M&L 75mm thick PCC (1:3:6) Type C1 (using 20 mm thick graded stone aggregate) as in plinth protection laid in alternate bays n exc 2.5m length finished even & smooth and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed.

Excavation in trenches n.exc. 1.50m wide and n.exc. 1.50m in depth for foundation n.exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed .

M&L RCC, M-25 Design Mix (using 20mm graded crushed stone aggregate) as in foundation including , raft, plinth beam bases for column etc basement slabs under ramed piles and mass concrete complete all as specified and directed

M&L TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per ser item No 14 above but 5mm to 10mm dia as in stirrups, spacers binders etc complete all as specified and directed

Form work to side of concrete foundation, footing , bases of columns, raft and raft beams, sides and soffits (If any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and directed

Supply only integral water proofing compound

M&L 15 mm thick rendering in cement mortar 1:4 mixed with water proofing compound finished with even and smooth mixed with Liquid Water Proofing admixture complete all as specified and directed. (Note : WPA shall be measured and paid separately under relevant item of this Schedule).

Preparation of newly plasterd surface of wall and applying two coats cement base paint over a coat of primer complete all as specified and dircted

Preparation of new steel surface of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L 75 mm thick PCC (1:4:8) Type D2 (using 40mm graded stone aggregate) as in floor sub base complete all as specified and directed

M&L 50mm thick PCC (1:2:4) Type B2 (using 40mm graded stone aggregate) as in floor complete all as specified and directed

M&L Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over sand cushing complete all specified and directed. Note :- Sand cushioning will be measured and paid seperately.

Supply and laying of sand including spreading, levelling and ramming in layers n.exc. 25 cm thick in each layer complete all as directed

M&L providing cement concrete type B1, 1:2:4 (20 mm graded stone aggregate) as in copings complete all as directed

M&L Pre-cast (Factory casted) cement concrete Kerb stone casted in PCC (1:2:4) Type B-1 using 20mm graded stone aggregates with plan or interlocking joints (as directed) with solid blocks, exc. 10 cm in width and setting and jointed in cement mortar 1:6, complete all as specified & directed.

M&L preparation of kerb stone, new un-treated concrete or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint in black and white colour over a coat of primer complete all as specified and directed.

M&L Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, and eves board fixed with self tapping screws complete all as specified and directed

M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tesile strength of 550 Mpa as in roof covering to wall, fixed with self tapping screws complete all as specified and directed

S&F steel work in tubular section for post /truss/ purlin/rafters etc including special shaped washer etc. complete using induction butt welded tubes conforming to I.S. 1161-1998 grade St- 240 complete all as specified and directed

M&L plate (plain or chequered channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed

S&F mild steel screw bolts (Machine made) with hexagonal or square heads at one end and the screwed the other to be fitted with washers and one hexagonal or square but exc 22.5 but n.exc 30 cm long, dia of shank 11 to15 mm complete all as specified and directed

Excavating in post holes (or similar) each n.exc 0.5 cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm as in soft/loose soil complete all as specified and directed

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165

M&L framed work such as grills , gratings etc, with ends of bars shouldred and /or rivedted or forged into spikes : frmed guard bars: barred iron doors: ladders: framed ballusters: walk ways: raillings: and similar work confirming to FE 290 or EE-165 complete all as specified and as directed

M&L point wiring complete with 1.5 Sqmm single core multistranded copper conductor fire resistant low smoke (FRLS) PVC insulated and unsheathed cable 1100 Volts grade confirming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20 mm external dia) but shall be increased as per actual site requirement in accordance with clause No. 19.125 of SSR Part-I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling including 1.5 mm FRLS PVC insulated unsheathed copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakellite white/coloured top sheet cover 3.0 mm thick for one light point controlled by one way switch all as specified & directed.

All as per item No. 36.00 here-in-before but for one fan point controlled by one switch and regulator

All as per item No. 36.00 here-in-before but for one exhaust point controlled by one switch and regulator

All as per serial item No. 36.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

All as per serial item No. 36.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

All as per serial item No. 36.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.

Supply and fixing switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts.

S&F switch piano flush type single pole two way 5 Amps 230 Volts .

Supply and fixing switch piano, flush type, single pole, one way, 15 Amp, 230 Volts.

Supply and fixing socket outlet, 3 pin (with 2 pin outlet also), 5/6 Amp, flush type, 240 Volts.

Supply and fixing socket outlet, 2 in 1, 3 pin, 5 and 15 Amp, flush type, 240 Volts.

Supply and fixing ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified.

Supply and fixing stepped type electronic fan regulator, flush type and connecting up, ISI marked, 240 Volts.

Supply and fixing decorative ultra slim liner LED lighting fixture with extended poly carbonate environmental friendly, energy efficient suitable for 16W to 20W with LED tube of model E-LITE LED pride and connecting up, complete all as specified and directed.Make : Havells cat part No. LHEXBHP71N1W018 or equivalent of philips/Crompton Greaves/ bajaj/Wipro/GE

S&F LED type street-DRACO SERIES light luminaire 20 watt 230 V 50 Hz including all necessary fitting accessories and LED complete all as directed. Make: C&S Cat Part no. LTESS20WLED or equvalent Crompton Greaves /Wipro

Supply and fixing lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.

Supply and Fixing LED Bulb energy saving 10/11 W complete all as specified and directed Make :- Havells/Crompton/Syska

Supply and fixing sheet metal enclosures double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar,8 way, 240 Volts.

S & F MCB 32/40 Amp, single pole & neutral,240 Volt complete all as specified & directed.

S & F MCB 6-40 Amp, single pole 240 Volt complete all as specified & directed.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 25 sqmm 4 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified & directed. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid separately under relevant items of this BOQ.

M&L brick work with FLY ASH BRICKS(As Per IS-13757(1993) burnt clay fly ash building bricks), (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed.

M&L dry sand and punning for cushioning to under ground cable all as directed. Note :- Punned thickness shall be measured and considered for payment purposes.

Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & directed.

M&L 40mm dia GI pipe ( Light grade ) for protection of LT cable fixed to walls/ poles/road crossing including clamps complete all as specified and as directed.

Supply and fix ceiling fan complete with electronic type regulator and accessories 230v 1200mm sweep BEE 5 star rated as approved by GE.

Supply and fixing LED flood light 70 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.

M/s Laxmi Enterprises