Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.6 LAccepted-AOC 2193 10 A P W T MANIMAJRA CHANDIGARH | ₹4.6 L | 1 | Accepted-AOC DUE TO L-1 AGENCY |
| 2 | 2₹4.7 LRejected-Finance 286 SECTOR 32 A CHANDIGARH | ₹4.7 L | 2 | Rejected-Finance RATE ON HIGHER SIDE |
| 3 | 3₹5.2 LRejected-Finance 1627 SECTOR 26 PANCHKULA | ₹5.2 L | 3 | Rejected-Finance RATE ON HIGHER SIDE |
| 4 | 4₹5.3 LRejected-Finance 130 SECTOR 40 A CHANDIGARH | CHANDIGARH | CHANDIGARH | 160001 | ₹5.3 L | 4 | Rejected-Finance RATE ON HIGHER SIDE |
Tender Value
₹7.6 L
EMD Value
₹15,227
Closing Date
27 Feb 2026, 11:00 amClosed
XEN CP3
XEN CP3 SEC 16 CHD
AR AND SR FOR NON RESIDENTIAL BUILDINGS OF GOVT. MODEL SR. SEC. SCHOOL SECTOR 10 CHANDIGARH (WOOD, CEMENT AND OTHER MISC. WORKS)
2026_CHD_90764_1
CP3/2026/2603594
Open Tender
Civil Works
90 days
SECTOR 10 CHANDIGARH
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹15,227
17 Mar 2026
19 Feb 2026
27 Feb 2026
19 Feb 2026
27 Feb 2026
19 Feb 2026
Providing and fixing 4mm thick plain glass panes with beading when required over existing chowkhat or glazed shutter including the cost of nails, putty etc. complete in all respect to the entire satisfaction of Engineer-in-charge.
12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
Providing and fixing 35mm thick phenol bounded factory manufactured solid flush door shutter ISI marked with both side commercial face in the existing chowkhat. The rate includes the cost of Alum hinges, all necessary Alum fittings and painting two coats over one coat of primer after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge.
Providing and fixing golden champ wood chowkhat (kiln seasoned) 4 1/2" x 2 1/4"including cost of corner straps, iron hold fasts, hinges, screws,nails, fevicol etc. and painting two coats of wood preserver to sides of chowkhats. Rate includes the cost of dismantling of all damaged chowkhats and making good the damage to walls plaster and floors as required including, disposal of rubbish to the dumping ground the rate further includes the cost of painting two coats synthetic enamel paint over one coat of wood primer complete in all respect and to the entire satisfaction of Engineer-in-Charge.
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead
Providing and fixing 35mm thick golden champ wood (kiln seasoned) glazed window shutters consisting of vertical and horizontal styles 75x35mm size with 4mm thick floated glass pane fixed with 1/2"x3/4" golden champ wood (kiln seasoned) beading. The rate further includes the cost of 2 nos. 3" hinges, 2 nos. Aluminium tower bolts 4", Aluminium handles 1 nos., I-hook and two coats of special quality enamel paint over coat of primer after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge.
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
Providing and laying vitrified floor tiles of size 600 x 600 mm single charge (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade. The tiles are to be fixed with 3mm grove using spacers. The tiles are to be laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm The grove are to be filled with cementitious grout mix with proportion of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material. Single charge vitrified tile of size 600x600 mm
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost).
Providing and fixing 60 mm thick high density rubber moulded precast cement concrete paver block grey/ colored/ polished/ designer (manufactured by vibro hydraulic pressure process) consisting of design mix of cement, sand and fine aggregate having designation M35 ISI marked including the cost of good quality color and hardening agents. The paver should be compiled with tensile strength and breaking load as per BIS 6717-1993 and shall be tested against resistance to bear as per IS 1237-1980 (specification for cement concrete floor tiles). The paver should be laid over layer of 25 mm average thick screened coarse sand to the required slope and filling the joints with fine sand complete in all respects and to the entire satisfaction of Engineer in charge.
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
Providing and fixing IRC welded steel wire fabric of size 3"x1" wire of 12 gauge in existing angle iron frame properly welded to the frame with the help of existing MS Flat 25x5mm beading by cutting to the required size, straightening and pirmer in position complete in all respect and to entire satisfcation of Engineer-in-charge.
Providing and fixing of M.S. angle iron frame of size 5’-4-1/2” x 2’-6” (for fixing of IRC fabric) having outer frame made out of angle iron of size 40 x 40 x 6mm M.S. flat 20 x 3mm as beading to hold the IRC fabric in position. The M.S. frame is welded to box type vertical post with two no M.S. ring of 3” dia made out of M.S. flat 40 x 5mm. The vertical box post of 3’-4.1/2” long made out with 2 no M.S. angle iron of size 40 x 40 x 6mm welded to each other having 6” long hold fast of the same material at bottom are grouted on the top of boundry wall in PCC 1:2:4 of size 9” x 9” x 9”after making recess in existing boundary wall. 4” long M.S. pieces having sharpened edged made out of M.S. flat 40 x 5mm are welded to the top member of the frame @ 3” c/c. It also includes the cost of two coats of first quality black paint (of duly approved brand) over one coat of steel primer as per as per Drg first no 309 Job no M - 16 complete in all respect and to the entire satisfaction of Engineer-in-charge.
Providing and laying water proofing coating having three coats of water proofing chemical with 1 coat as primer and 2 subsequent coats. The water proofing chemical shall have properties as water absorption 1% minimum, pot life at 30º C : 30 min, application temperature 10º C, bond strength to concrete : approx 1 N/mm2. (Fosroc Hydroproof xtra or equivalent) . The primer coat shall be provided in ratio 1 part of Hydroproof Xtra :2 parts of water : 4 parts of cement mixed material with the above proportion will cover an area of 16-17sqm for 1 L of Hydroproof XTRA . The two top coats shall laid in ratio 1:2 i.e. 1 part of chemical and 2 parts of neat cement after laying of 800 micron fibre mesh. The thickness of each coat shall be about 1 to 2 mm. The 2nd coat shall be applied after 5-6 hours of 1st coat. The full curing shall be done after 12 hours with must curing after 6 hours. The coverage of top coats shall be 4.5-5.0 sqm /litre/ coat. The work shall be undertaken as per manufacturer specifications, complete in all respect and to the entire satisfaction of Engineer in Charge.
Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer’s specification. One or more coats on old work
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
Finishing walls with Acrylic Smooth exterior paint of required shade Old work (One or more coat applied @ 0.90 ltr/10 sqm).
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Providing and applying cement based putty (Birla, Jk or equivalent) to the required finish complete in all respect and to the entire satisfaction of Engineer-in-charge.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 7.16 MB
BOQ_110998.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid