PROVISION OF PU FLOORING AND ASSOCIATED WORKS IN CERTAIN BAYS OF ASD 29 AT AF STATION OJHAR

Amount

Material and labour for polyurethene flooring on concrete surface with the following specifications complete all as specified and as directed. (a) Roughening/ preparing the concrete surface substrata as required for base coat as per manufacturer's instruction. (b) Laying of 1st Coat Primer of (MASTER PRIME -52, 0.4 to 0.7mm thick coverage 1 Kg/ 6 Sqm) with consisting of two component solvented epoxy resin based primer suitable for priming concrete surface before laying of the primer the surface drying & loose particles. (c) Material and labour application of body coat 3.5mm thick of TECH FLOOR MORTAR SL confirming to BS 6319/ CIPOXY 15 with combination of base, sealent hardener mixed in ratio of base : Hardener : Filler (aggregate) = 2:1:6 , 2 Kg per 1 Sqm for 1mm thickness (d) Top coat of TECH FLOOR 2K PU SL.1mm thick with glossy finish with covering capacity of 1.5 Kg per 1 sqm per 1mm thickness MANUFACTURERS OF PU FLOORING :- M/s CHOUKSEY/ M/s CIPY Polturethene Ltd/ M/s Pidilite industries Ltd / FOSROC.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. Note : - The demolished material shall be disposed off 5 km away from MoD land, the rate quoted for the item shall deemed to be included.

Material and labour for 50mm thick cement concrete type B1, 1:2:4 (20mm graded aggregate) as in flooring finished surface even and smooth without using extra cement complete all as specified and as directed.

Supply & fix 38mm wide glass dividing strips, 3mm thick for flooring complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc. 4 Sqm each compete all as specified as directed

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each compete all as specified as directed.

Material and labour for providing Aluminiium shutter with powder coated frame 88.9mmx47.63mmx1.60 mm thick and size of shutter with top rail , middle rail and bottom rail and style of size 85 mm x 44.5 mm x 1.56 mm thick with 200 mm size powder coated 2 nos with each leaf , Heavy duty powder coated aluminium tower bolt 150mm long 2 Nos per leaf, 3 nos Heavy duty aluminium powder coated hinges of size 125mm with each leaf including 12 mm thick both side prelaminated particle board / 5.5 mm thick glass pane in the both panel with necessary joining cleats, rubber packing, aluminium beading, hydraulicc door closer ,screws etc complete all as specified and as directed Note - All fitting shall be of same finished as of door shutter and shutter may be single/ double leaf, if the shutteris more than 1.10mtr it shall be of double leaf, the hollow section of vertical style where the hinges are to be provided the complete vertical style shall be provided with soft wood and minimum 65mm long screw provided for fixing of hinges compete all as specified as directed.

Material and labour forr powder coated aluminium sliding window with anodized aluminium frame of 3 Track of size 92mmx32mmx 1.5mm thick, with sliding shutters (02 glass and 01 wirecloth) with necessary channels (top rail, bottom rail and style of size 40mmx 18mm x1.10 mm thick) including glazing with tinted sheet glass panel 4.00mm thick and Aluminum alloy wirecloth 004mm nominal dia and avg width of aperture 1.4mm, fitted with necessary jointing cleats, glazing clips,locking device one for each shutter , rubber packing, aluminium beading, screws, rawl plugs including all necessary holes / drilling etc, compete all as specified as directed.

Supply & fix Powder coated aluminium (minimum thickness of powder coating 50 micron) for frame with shutters of fixed windows including fixing pivots and making provision for of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws compete all as specified as directed.

Supply & fix 4.00 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including small pieces as required for louver ventilators compete all as specified as directed.

Dismantling Asbestos cement /FRP sheet/GI sheet(corrugated, semi corrugated, etc.) sheets in roof coverings up to height 25M and taking care of earthing strip and refixing compete all as specified as directed.

Material and labour for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm TCT thick of any colour approved by GE having tensile strength of 550Mpa as in roof covering / cladding to wall , fixed with 5 Nos. self tapping screws on each sheet /each support rubber lining and filling of gap with cement mortar in CM 1:4 with wall and sheet up to 16 mtr height compete all as specified as directed.

All as per item no 12 above but in ridges of same profile and minimun girth 750mm compete all as specified as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for compete all as specified as directed.

Supply & fix Hand rails, half round or other mild steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shapeas directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 compete all as specified as directed.

Complete Removal of existing treatment by scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots, plastic emulsion paint, synthetic enamal paint and removing nails and fill the holes with putty etc and applying two coat of Oil bound distemper using roller, brushes including in patches over a coat of primer coat of 1.50 mm thick in two layers putty and minimum 6 hr interval between the coats on surfaces complete of wall. compete all as specified as directed.

Material and labour for coloured Non skid ceramic tiles 7 to 8 mm thick of colour patteren as approved and as per manufacturers catalouge (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floor etc over 15mm thick screed bed with cement mortar 1:6 and set and jointed in neat cement slurry and pointed in white or coloured cement to match compete all as specified as directed.

Material and labour for coloured glazed ceramic tiles 300 mm x450 mm & 7 mm thick on vertical surfaces of colour patteren as approved and as per manufacturers catalouge such as skirting, dados etc, set and jointed in neat cement slurry over and including 10 mm thick bedding layer/ backing coat in CM 1:4 complete and pointed in white or coloured cement to match compete all as specified as directed. Note : Skirting shall be provided to match with colour and size of floor tiles provided in rooms.

Supply & fix in repair bib tap long body foam flow with flange of bore size 15mm, cast copper alloy, chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule complete all as specified and as directed

Supply & fix in repairs soap dish stainless steel as approved by GE complete all as specified and as directed

Supply & fix in repair stainless steel plate rack SS 304 grade of size 31'' x 30'' x 10'' with using stainless steel sheet of 0.63mm thickness Fixed with Rawl plug and screw. complete all as specified and as directed. Note : The plate rack shall be of 1st Quality, weight and composition of SS shall be as per IS.

Supply & fix in repair stainless steel sinks SS 304 grade without drainage board made of 1mm thick stainless steel sheet for kitchen or laboratory with plugs washers and waste pipe including fixing cantilever brackets and connecting union to pipe overall size 610mm x 460mmx254mm and bowl size 456mm x 405mm x254mm complete all as specified and as directed. Make: Cat part No 1224 SD of Prayag or equivilant in Nirali/ Neelkamal

Material and labour for 75 mm, dia PVC (SWR) floor trap, plain with SS grating including jointing with solvent cement complete all as specified and as directed. Note: Trap shall be sealed properly with the existing pipe and got tested by Filling with water

Supply & fix PVC (SWR) pipes 75mm dia single, socketed in any length ,with rubber ring joints fixed to walls with MS clamps complete all as directed

Supply & fix PVC (SWR) bends 75mm dia complete all as specified and as directed.

Material and labour for drilling holes for pipes etc in cadappa/granite including RCC slab nexc 25mm dia and n exc 150mm depth complete all as specified and as directed.

Demolition of reinforced cement concrete in any position like roofs, floors other than ground floors , beam , staircases , landings , chajjas,projections, facias and similar suspended work or reinforcement cut as required to facilitate demolition for portions ordered to be dismanttled up to 15 m height including form work and necessary saftey measures complete all as specified and as directed. Note : - The demolished material shall be disposed off 5 km away from MoD land, the rate quoted for the item shall deemed to be included.

Material and labour for reinforced cement concrete type B1 (1:2:4) nominal mix using 20 mm graded broken stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, shelves and the like complete all as specified and as directed.

Material and labour for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

Cutting openings built in cement mortar , through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core,etc.. to store and rubbish not exc. 50m complete all as specified and as directed.

Forming jambs in CM 1:4 to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work complete all as specified and as directed.

Material and labour for Granite (of any colour or any grains as approved) work with 16 to 18mm thick table rubbed and polished as in steps jambs , pillers , window cills, cooking platform and similar works including pointing in with cement using 1:2 using marble dust and admixture of pigments to match with the shade of granite over and including 15 mm thick screed bed in CM 1:6 for laying granite all as specified and directed including taking down / dismantaling of existing plaster/ stone of any type. Note : Granite shall be best quality and shall be provided one piece and width minimum 70mm in jambs except of cooking platform whicl shall be of full width as per site including full moulding of exposed edges with polishing. The back surface of granite shall be made rough by sprinkling small pebbles using adhesive for bonding with bedding layer.

Supply & fix Horizontal level suspended ceiling comprising of GI Clip-in Micro perforated 600x600mm (nominal size) tiles of 120mm galvanised steel as per IS 277 (2003) suitable for architectural finishes in 0.5mm thickness as per in IS:513 (1994) in Global white colour with concealed suspension system having a bevelled edge of 3x3mm and height of 33mm on one side and 18mm on other side. Tile shall have perforated of hole diameter 2.5mm and open area 16% with linear and diagonal pitch of 5.5mm and 7.7mm respectively along with a border of 10mm. The tile shall be electrostaticalkly polyster powder coated using RoHS compliant powder having coating thickness ranging from 60-80microns. Back side of the tile shall have Soundtex fleece hot pressed mechanically for uniform bonding to achieve NRC up to 0.7 all as per manufactures instructions complete all as specified and as directed. Make :- Armstrong or techno commercially equivalent in M/s Anchor ceiling tiles/ India gypsum board

Dismantling wall/ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets & fillet framewith existing wall for wall panelling complete all as specified and as directed.

Supply & fix 25 mm thick insulated PVC wall lining consisting of PVC insulated panel with single side prelam PVC sheet used instead of plain colour sheet duly fitted into the wall including PVC strips complete all as specified and as directed.

Supply & fix mild steel TMT bar of 8 to 10 mm dia and over cut to length bent to shape required including cranking and binding with mild steel annealed wire not less than 0.9 mm dia complete all as specified and as directed.

Taking down existing sub main wiring of any size at any height complete all as specified and as directed.

Material and labour for wiring for circuit/ sub main wiring 2x2.5 Sqmm+1x12.5 Sqmm earth wire PVC (FRZH) insulated copper conductor, single core, 1100 v grade cable in surface as required including in stove enameled steel conduit conduit in 20/25mm complete all as specified and directed.

Material and labour for wiring for circuit/ sub main wiring 2x4.0 Sqmm+1x4.0 Sqmm earth wire PVC (FRZH) insulated copper conductor, single core, 1100 v grade cable in surface as required including in stove enameled steel conduit conduits in concealed 20/25mm complete all as specified and directed.

Supply and fix LED Highbay fitting 120 Watt of 150 lum/ watt, body made out of cast aluminium alloy, epoxy painted alongwith wire guard complete with all accessories of IP 66 Protection incl fixing arrangement and connecting up, complete all as directed . Make: Cat No CIP-320-120-57-60DHL4-GL-NSR of make Crompton Greaves or equivalent in Philips/ Wipro as approved.

Supply, Installation, testing and commissioning of flame proof-weather proof LED flood light 120 watt circular LED flood light with tapered fin design and excellent thermal management along with IP65 protection, complete all as specified and as directed by engineer in charge. Including taking down existing fittings. Make: Shyam switch gears Cat part No. “SSPL/FL/1251” or equivalent in Crompton Greaves / Shakti fixtures/ Sudhir

Supply and fix flame proof exhaust fan of 4000 cfm & 1440 rpm of capacity 0.25 HP including louvers, bird catchers,and mesh front, 230 volts AC including fan blades & fixing, complete all as specified and as directed including taking down existing fittings and depositing MES storeyard. Make: Cat part No SSPL/EF/140 of Shyam switch gears or equivalent in Sudhir/ Crompton Greaves / Shakti fixtures

Supply and fix flame proof wall mounted fan of 13000 cfm & 1440 rpm of capacity 0.25 HP, 230 volts AC including fan blades & fixing, complete all as specified and as directed including taking down existing fittings and depositing MES store yard. Make: Cat part No SSPL/WMF/140 of SHYAM SWITCH GEARS or equivalent in Sudhir / Shakti fixtures/ Crompton Greaves

Supply & Fix flame proof-weather proof switch socket and plug combined 16A, 250V ( 2 POLE+ EARTH) complete all as specified and directed . Make: Shyam switch gears or equivalent in Sudhir / Shakti fixtures/ Crompton Greaves

Supply, Installation, testing and commissioning of flame proof-weather proof distribution board, 8 way SPN of complete all as specified and directed. Make: Cat part No. SSPL/ MCDB/186 of Crompton Greaves or equivalent in Shyam switch gears/ Sudhir / Shakti fixtures

Supply, Installation, testing and commissioning of flame proof-weather proof distribution board, 4 way SPN complete all as specifiedand directed. Make: Cat part No. SSPL/ MCDB/186 of Crompton Greaves or equivalent in Shyam switch gears/ Sudhir / Shakti fixtures

Supply and fix in repair MCB Double pole ON OFF 32 amp 240 V or equivalent complete all as specified and as directed. Make: Shyam switch gears cat part no SSPL/RI/106 or equivalent in Sudhir / Shakti fixtures/ Crompton Greaves

Supply and fix in repair MCB single pole ON OFF 10 amp 240 V Make : Shyam switch gears Cat part no SSPL/RI/146 or equivalent in Sudhir / Shakti fixtures/ Crompton Greaves

Supply and fix wall mounted fan operated on 230V AC Single phase electric supply with oscillating mechanism and built in speed control regulator, complete with 3 core stranded copper conductor of size 0.5 sqmm for minium 2 mtr long with 2 pin 5 Amp moulded top size of sweep 600 mm. Make: Bajaj Model Swing or equivalent in Crompton Greaves/ Bajaj

Supply & fix modular switch 1 way 10A, 1 module complete all as specified and as directed.

Supply & fix in repair Ceiling rose surface type, PVC/Polycarbonate islated body size 50x28 mm three terminals complete all as specified and as directed.

Supply and fix in repair sheet metal enclosure for DBs when MCBs to be used single pole and neutral double door, 240 volt, IP 43 with metal door , 8 way, complete all as specified and as directed.

Supply and fix in repair MCB SPN 32 amp 240 V,10KA of complete all as specified and as directed.

Supply and fix in repair MCB SP 6- 32 amp 240 V,10KA of complete all as specified and as directed.

Core cutting for making hole for the exhaust fan in drop tank bay at aircraft servicing division (ASD-29) wall of stone/ brick masonry complete all as specified and as directed.

Supply and fix in exhaust fan single phase, steel body AC single phase. 230V of size 300mm sweep with louvers, blades & frame complete all as specified and as directed.

Note : The amount against Schedule of Credit on Page No. 30 shall be deducted from the total amount quoted against Sch 'A' while deriving lum Sum for Acceptance.

M/S PRAMOD SURESHCHANDRA AHER

M/S DEV ENTERPRISES

M/s Shrangi Rishi Construction

Santhi Enterprises

Asha Enterprises