Construction of 2 unit Garage, Shed, Gazebo, Raising Height of Boundary Wall, Campus development, drain and pathway in CJM Residence Nawada for the year 2026-27

Sl. Item of Work Unit Qty Cement Coarse Sand Stone Chips Local Sand Bricks

1 Local Sand cum #REF! #REF!

2 Brick flat soling sqm #REF! #REF! #REF!

3 P.C.C (1:2:4) cum #REF! #REF! #REF! #REF!

4 R.C.C (1:1.5:3) cum #REF! #REF! #REF! #REF!

5 B/W (1:4) cum #REF! #REF! #REF! #REF!

10 12mm CP(1:3) 1:4) sqm #REF! #REF! #REF!

#REF! #REF! #REF! #REF! #REF!

Mt cum cum cum Nos.

BOQ for the Construction of 2 unit Garage, Shed, Gazebo, Raising Height of Boundary Wall, Campus development, drain and pathway in CJM Residence Nawada for the year 2026-27

Sl. SOR-22 Particulars Qty Unit Rate Amount

1 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

2 2.25(A) Excavating, supplying and filling of local earth (including royaltybut excluding cairriage cost) by mechanical transport uptoa leadof 3km also including ramming and watering of the earth in layers not exceeding 20cm in trenches,plinth,sides of foundation etc.complete. If local earth is available at more than 3km .

3 2.29.1 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m All kinds of soil.

2 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

3 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

4 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. Cm(1:2:4)

11.77 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

5 5.33A.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement.1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size)

6 6.1.12C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :Cement mortar 1.:4 (1 cement: 4 coarse sand )

7 5.33A.2.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete

Walls columns, pillars, posts cind struts

8 6.1.14C + 6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :Cement mortar 1:6 (1 cement: 6 coarse sand )Extra tor Brick work in superstructure above plinth level upto floor V cum

9 6.1A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand )

10 5.33A.2.2 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grade reinforcd cement concrete

Beams, planth beams, girders, bressumers, contilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc.

5.1.2 Providing and laying inposition specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size

10 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

(i) 5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia 990.90 kg 94.50 93640.00

(ii) 5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia 1199.62 kg 92.60 111085.00

(ii) 5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia 1716.14 kg 90.80 155826.00

11 10.16.1 steel work in built up section tubular trusses do all complete job.

100mm dia MS pipe 4.5mm thick 320.04 kg

80 mm dia pipe MS PIPE 4 mm thick 221.74 kg

50mm dia MS pipe 3.65mm thick 227.48 kg

#REF! STEEL ANGLES (50X50X6) (boundary riasing)

18.76 Cutting holes up to 30x30 cm in walls including making good the same: 70.00 no 198.50 13895.00

10.33.7 Labour for cutting of M.S. angle iron post to required length, one end splitted as fish tailed in a length of 150mm complete as per building specification and direction of E/l 310.00 each 28.20 8742.00

10.33.6 Drilling 6mm Dia. In M.S. angle iron for fixing of staples etc. as per building specification and direction of E/l. 325.00 each 9.00 2925.00

12 5.9 Centring and shuttering including strutting, propping etc. and removal of form for.

(i) 5.9.1 Foundations, footings, bases of columns etc. for mass concrete.

(ii) 5.9.6 Columns,Pillars, Piers, Abutments, Posts and Struts

(iii) 5.9.5 Lintels, beams, plinth bams, griders, bressumers and contilevers

(v) 5.9.3 Suspended floors, roots, landings, balcnies and access platform.

13 13.11.4 12mm Cement plaster of mix.1:6(1 cement: 6 coarse sand)

internal surface

14 13.24.2 6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand)

15 13.12.4 15mm Cement plaster of mix.1:6(1 cement: 6 coarse sand)

external surface

16 13.17.1 12 mm cement plaster 1:3 (1 cement: 3 coarse sand ) finished with a floating coat of neat cement on the rough side of single or half brick wall.

external surface

13.80* Removing dry or oil bound distemper by scrapping,sandpaperand preparing the surface smooth including necessary repari scratches tec. Gmplet

#REF! Repairs to plaster of thickness mm to 20mm in patches of area 2.5sq.meter sand under, including cutting the patchin propers hape, raking out joints and preparing and plastering thes urface of the walls complete, including disposal of rubbish to the dumpingg round, all complete as per direction of Engineer-in-Charge.

17 10.5.1 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings completejncluding applying a priming coat of approved steel primer.Using M.S. angle 40x40x6 mm for diagonal braces

18 9.48.1 Providing and fixing M.S.grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

19 9.141 Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5mm(±0.2mm),made out of single piece extruded PVC profile,with mitred cut joint sand joint with 2nos of PVC bracket of size190 mmx100mmlongarmsof crosssectionsize35x15mm&

9.142.1 35mm thick factory made Solid panel PVC Door shutter, made out of single pie ceextruded soild PVC profiles, 5mm(±0.2mm) thick, having styles & rails (except lockrail) of size 95mmx35mmx5mm,out of which 75mm shallbe flat and 20mm shallbetapered(onbothside),havingone side thickness of 15mm.

20 12.65x4 providing and fixing aluminium colour profile sheet do all complete job.

21 26.22.1 providing and fixing 15mm thick tegular edge light weingt calcium false celling of specified material of size 595x595mm of approved .all compllete job

22 13.77.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade.New work (two or more coats ) over and including priming coat with cement primer

23 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade.New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

13.78.1+13.79.1 Finishing walls with water proffing cement paint approved brand and manufacture and of required shade to give an even shade.

24 13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade New steel work (two or more coats)

25 13.82.3 providing two coat painting over new surface of steel with synthetic enamel paints all tubelar pipe

26 11.18.2 providing and laying 22 mm thick precast cement concrete chequired tiels do all comp. job

27 11.46.2 providing and laying vertifird tiles 600x600 mm (thikness to be specified by manufacture)

28 11.37 Providing and laying Ceramic glazed fioor tiles 300x300mm (thickness to be specified by the manufacturer) of ist quality conforming to IS: 15622of approved make in colours uchas white, Ivory,Grey,Fume Red ,Brown , laid on 20mm thick Cemen tmotar 1:4(1cement: 4 coarse sand ) including pointing the joints with white cemet., complete

29 11.36 Providing and fixing1st quality ceramic glazed wall tiles conforming to IS:15622(Thickness to be specified by the manufacture) of approved make inall colours, shade exceptburgundy,bottle green,blackof any sizeas approvedby Engineer-in-charge in skirting, risers of steps anddadosover 12mmthickbedof cementMotar 1:3.

30 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe,

31 17.7.2 Providing and fixing wash basin with C.I.brackets, 15mm C.P. brass pillar taps, 32mmC.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

32 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes

33 12.78.2 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.110mm dia

34 18.15.2 Providing and fixing brass bib cock of approved quality :

35 18.52.1 Providing and fixing brass stop cock of approved quality :15 mm nominal bore

36 18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

37 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms. 2.00 Nos 96.80 194.00

38 17.73.1 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing not less than 170 gms 1.00 Nos 397.30 397.00

39 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour,weighing not less than 88 gms. 1.00 Nos 204.70 205.00

40 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 1.00 Nos 1068.50 1069.00

41 12.79 Providing and fixing on wall face unplasticised-PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985includingjointingwithseal ringconformingtoIS:5382leaving10mm gap for thermal expansion.

ii 12.79.3.2 Single tee with door 110x110x110mm 3.00 Nos 193.40 580.00

iv 12.79.6.2 Shoe plain 110m Shoe 4.00 Nos 115.95 464.00

42 12.80.2 Providing and fixing unplasticised-PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cemen tmortar(1:4) 1 cement: 4 corsa sand and making good the wall etc complete 110 mm 8.00 Nos 182.72 1462.00

43 18.75.2 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

44 19.92.1 Making soak pit 2.5m dia meter 3.0 metre deep with 45x45cm dry brick honey combshaft with bricks and S.W. drain pipe100mm diameter, 1.8 m long complete as per standard design

45 Providing Labour, carpender for miscellaneous work

0L01 Unskilled labour 6.00 nos 355.41 2132

0L15 Welder 15.00 nos 537.77 8067

45 Carriage of Materials

(ii) Coarse Sand 44.27 cum 533.45 23616.00

(iii)Stone Chips 44.18 cum 1436.95 63484.00

(iv) Local Sand 79.84 cum 320.50 25589.00

(iv) local earth 418.11 cum 310.20 129699

correction factor 0.982 2721113

J.E BCD NAWADA A.E BCD NAWADA E.E BCD NAWADA