REPAIR/MAINT OF STEEL FURNITURE INCLUDING PAINTING AT AF STN BKT

Amount

REPAIR TO ALMIRAH STEEL LARGE/MED WITH SHELVES/ 1/2 H x 1/2S:- Repairs to almirah steel large/medium with shelves/ 1/2H x 1/2S as appended below complete all as specified and directed including supply of materials and labours including transporting , shifting , handling of furniture and equipment at the site and yard as required, by contractors' own arrangement as directed and specified by engr-in-charge. (a) Removing of unserviceable locks and providing new locks of existing size and design such as 50 mm, Brass Lever 6 levers ISI marked Make: Harrisson Locks / Link Locks/ Godrej or equivalent make duly approved by engr-in-charge with stainless steel keys in triplicate for Almirah large/ med/ Small steel with shelves/ 1/2H x 1/2S and fixing including aligning and fitting them with existing 3 way locking system by riveting/ screw/ welding as required and directed by engr-in-charge. (i) For almirah large steel

For almirah med steel

Removing of unserviceable legs and providing new legs made out of 1mm thick MS black sheet similar to existing shape, design & size & welding properly to almirah steel with shelves / 1/2H x 1/2S as directed as per drg duly painted with two coats of synthetic enamel paint Olive green/ Smoke Gray or same as of existing colour as approved and directed by engr-in-charge, over a coat of red oxide primer by means of spray painting (i) For almirah large steel.

For almirah med steel.

Reparing and fixing of shelves by providing new clamps in qty 4 or as required or by welding for each shelf as per existing design or directed to adjusting / fixing the shelves.

Removing of unserviceable shelves and providing and fixing the shelves by riveting / clamps/ welding as per existing design and as directed by engr-in-charge

Removing of unserviceable broken handles & providing new steel handle chromium plated similar to existing shape, size & design to almirah large/med steel with shelves / 1/2H x 1/2S & fix suitably as directed.

Removing of unserviceable 3 way locking mechanism / device alongwith rods & clamps for top and bottom locking of doors and providing new 3 way locking mechanism / device with rod of 10mm dia MS bar made to existing shape, size and design including cover for lock and clamping as required complete all as specified and directed by engr-in-charge. (i) For almirah large steel.

For almirah med steel.

Spray painting to both external & internal surfaces of almirah large steel with shelves / 1/2H x 1/2S with two coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour as directed including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed (i) For almirah large steel

For almirah med steel

Repairing / Fitment/ Denting/ Straighting of body or part and alignment of Door of Almirah Large / small/ med steel with shelves / 1/2 H x 1/2S or any part thereof as required including repair/ fixing of hinges with welding , etc all as specified and directed by engr-in-charge

REPAIR TO BEDSIDE LOCKER STEEL Repairs to Bedside locker steel as appended below complete all as specified and directed including supply of materials and labours including transporting , shifting , handling of furniture and equipment at the site and yard as required, by contractors' own arrangement as directed and specified by engr-in-charge. (a) Removing of unserviceable Hasp & Staple and providing new Hasp & Steel of existing shape & size as approved by engr-in-charge and fixing by riveting/ screw as required and directed by engr-in-charge.

Removing of unserviceable legs and providing new legs made out of 1mm thick MS black sheet similar to existing shape, design & size & welding properly to bed side locker steel as directed as per drg duly painted with two coats of synthetic enamel paint Olive green/ Smoke Gray or same as of existing colour as approved and directed by engr-in-charge, over a coat of red oxide primer by means of spray painting

Reparing of shelves by providing new clamps or by welding as per existing design or directed to adjusting / fixing the shelves.

Removing of unserviceable shelves and providing and fixing the shelves by riveting / clamps/ welding as per existing design and as directed by engr-in-charge

Spray painting to both external & internal surfaces of bedside locker steel with two coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour as directed including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed

Repairing / Fitment/ Denting/ Straighting of body or part and alignment of Door of Bedside Locker steel or any part thereof as required including repair/ fixing of hinges with welding, etc all as specified and directed by engr-in-charge

REPAIR TO BED HARD STEEL( MAP) Removing of unserviceable plywood 12 mm thick and supply and fixing 12mm thick ply wood commercial BWR plywood ISI marked Make: KitPly/ Century/ Archid Ply or equivalent as approved by engr-in-charge complete all as per specified and as direction by Engr-in-charge.

M&L for scrubbing, derusting and applying two coat of synthetic Black enamel paint (spray painting) incl preparation of surface all as directed by Engr - In - charge for Bed hard steel.

Removing of unserviceable prelaminated particle board 18 mm thick of head board of bed hard steel and supply and fixing 18mm thick prelaminated particle board interior grade Make:- Novapan/Kitlam/Archid ISI Marked all as per specified and as direction by Engr-in-charge.

Removing of unserviceable prelaminated particle board 18 mm thick of foot board of bed hard steel and supply and fixing 18mm thick prelaminated particle board interior grade Make:- Novapan/Kitlam/Archid ISI Marked all as per specified and as direction by Engr-in-charge.

S&F in repair rubber shoe black for 38mm Square pipe suitable for legs of Bed hard Steel.

REPAIR TO BOOK CASE STEEL: (a) Taking out unserviceable handle and S&F of new chromium plated Steel handle of same size, size & design as existing as directed by Engr-in-Charge

Taking out unserviceable locks and S&F new brass lever 4/6 lever lock of make: harrisson/ Link/ godrej or equivalent make duly approved by engr-in-charge with stainless steel keys in triplicate all as specified and directed.

Opening of shelves and cleats and denting of de-shaped portion / welding as required and refixing in same position as directed by engr-in-charge

Removing of unserviceable/broken glass and S&F new glass 3 mm thick of existing shape and size or as shown on drawing and directed by Engr-in-Charge. Make: Modiguard/Atul/Swastik or equivalent duly approved by engr-in-charge.

Spray painting to both external & internal surfaces of Book Case steel with two coat of synthetic enamel / hammertone paint in olive green / smoke gray or existing colour as directed including scraping and derusting wherever necessary and applying putty and making smoothening of surfaces complete before painting all as directed

REPAIR TO CHAIR REVOLVING/ COMPUTER/EXECUTIVE GODREJ PATTERN : Dismantling and re-assembling with new components of the following unserviceable part/components of chair revolving steel alongwith providing of material and labour including fitment, repair, shifting and stacking of chairs at the site all as specified and directed by EIC of the following :- (a) Hydraulic system complete set as approved by Engr-in-charge

Chair leg wheel as approved by Engr-in-charge

Side handle as per existing shape, size & design and as directed.

Removal of U/S Foam seat bottom & back complete and S&F new Foam make Sleepwell or equivalent as approved by Engr-in-charge with superior grade of tapestry cloth cover / premium leatherite cloth in colour and pattern as approved (rate not less than Rs 250/Mtr) including removing of U/S ply wood and fixing of ply wood as per existing shape, size and design and PVC edging all around as per existing shape, size and design as required.

Removal of U/S Cushion Cover and supply & fixing of superior tapestry cloth / premium leatherite cloth in colour and pattern as approved for Seat back & bottom both (rate not less than Rs 250/Mtr) as approved by engr-in-charge as per existing shape, size & Design as directed

PVC Base with complete set

Iron Base plate with complete set

REPAIR TO CHAIR NON REVOLVING CUSHIONED /VISITOR / CHAIR WRITING (MAP) (a) Removal of U/S Foam seat bottom & back complete and S&F new Foam make Sleepwell or equivalent as approved by Engr-in-charge with superior grade of tapestry cloth cover / premium leatherite cloth in colour and pattern as approved (rate not less than Rs 250/Mtr) including removing of U/S ply wood and fixing of ply wood as per existing shape, size and design and PVC edging all around as per existing shape, size and design as required.

Removal of U/S Cushion Cover and supply & fixing of superior tapestry cloth / premium leatherite cloth in colour and pattern as approved for Seat back & bottom both (rate not less than Rs 250/Mtr) as approved by engr-in-charge as per existing shape, size & Design as directed

Supply and Fixing of rubber shoes of premium quality as per existing shape, size & design for the chair non revolving visitor as directed and specified by engr-in-charge.

M&L for scrubbing and derusting, denting / repairing of de-shaped portion of frame and metal strips and applying one coat of primer and over it two coat of synthetic enamel paint (spray painting) of approved colour incl preparation of surface all as directed by EIC

REPAIR TO CHAIR VARANDAH CANNED /PVC SEAT & BACK (MAP) :- (a) Repairs to broken mild steel components of chair varandah with gas welding, including replacing broken/ worn out legs with new 20mm dia MS pipe 1.6mm thick 75mm to100mm long .

Removing of all u/s canes of chair varandah and supply & recanning with premium plastic cane of size 4mm / 6mm half round best quality as per IS-5378-1968 including Two coat of Synthetic Enamel White / approved colour paint to complete frame before canning after derusting and surface preparation including shaping / repairing the deshaped portion of the frame of chair all as specified and shown on Drg. after preparation of steel surfaces.

S & F PVC rubber Shoe/Toe of best quality after removing the old un- serviceable shoes all as specified and directed.

Removing and replacing unserviceable seat back & seat bottom PVC moulded by fitting with new PVC moulded seat back & seat bottom of chair verandah including two coat of Synthetic Enamel paint White /approved colour to complete frame of chair after derusting and surface preparation including shaping / repairing the deshaped portion of the frame of chair all as specified and shown on Drg No -. FD/MAP-II/06, Make of the PVC Seat & Back - AMKO, Classic or Equivalent as approved by Engr-in-charge. ( Note :- Both Seat back & Seat bottom of the chair verandah shall be replaced to form 1 unit for the purpose of payment to the contractor.)

REPAIRS TO CHAIR TUBULAR STEEL WITH OR WITHOUT ARMS (a) Gas welding to broken members of chair tubular steel with & without arms as directed .

Painting of MS members of chair tubular steel with and without arms with one coat of synthetic enamel paint of olive green/ smoke gray or colour approved by engr-in-charge after duly preparation of steel surface all as specified and directed .

Taking out unserviceable seats from steel chair with & w/o Arms and S&F Ist class HW seasoned sheesham wood seat of existing size & shape and fixed with suitable bolts, nuts and washer including polishing, painting and recanning with polythene white cane half round of premium virgin quality as approved by engr-in-charge as per IS-5378 -1968 2mm wide and 0.3mm thick for seats & 4mm wide & 0.4mm thick for bordering including supply of cane and labour of canning complete all as directed by engr-in-charge.

Ditto to above item no. 46-- but steel chair back -do-

Taking out repairable seats from steel chair with & w/o Arms and fixing back the existing seat after recanning with polyethelyne white cane half round of premium virgin quality as approved by engr-in-charge as per IS-5378 -1968 2mm wide and 0.3mm thick for seats & 4mm wide & 0.4mm thick for bordering including supply of cane and labour of canning complete all as directed by engr-in-charge.

Ditto to above item no. 48-- but steel chair back -do-

Taking out US arms rest from steel chair with arms and supply and fixing chair arms rest with suitable bolts, nuts and washer

S&F in repair hard rubber shoe black 20mm dia suitable for bottom of steel chair with suitable size of steel screw

S&F in repair hard rubber cap black suitable for 20mm dia at top of steel chair complete.

CONVERSION OF GI CHARPOY NYLON NEWAR INTO CHARPOY GI PIPE PLY WOOD TOP AND REPAIR OF CHARPOY GI PIPE PLYTOP AND CHARPOY IP FOLDING HARD TOP (a) Removing of unserviceable nylon newar and supply and fixing 12mm thick ply wood commercial BWR plywood ISI marked Make: KitPly/ Century/ Archid Ply or equivalent as approved by engr-in-charge and fixing same with two nos of flat iron strip of size 900x32x5mm, bolts nuts and washers bolts of size 5x65mm 12 nos round countersunk head bolts after drilling the three holes of each long rail and drilling two hole on each short rail and two hole in flat iron complete all as directed including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing, alignment of charpoy to the level, chamfering of the edges as required and directed complete including labour for handling, shifting of furniture and equipement on site as well as on yard by contractor's own arrangement all as per specified and as direction by Engr-in-charge.

Removing of unserviceable elbow of charpoy GI pipe and S & F three way GI elbow 32mm medium grade ISI marked complete all as specified and directed by Engr-in-charge.

Removing of unserviceable check nut of GI Charpoy and s&f new check nut 32mm bore 10mm thick suitable for charpoi GI pipe 32mm bore complete all as specified & directed.

M&L for removing the threadless/broken long rails from chairpoy GI pipe 32mm and S & F new long rail of 32mm dia GI pipe medium grade 1.88 mm long threaded at both ends and fixed to existing three way elbow 32mm dia and all shown on drawing (GI pipe make : TATA /Jindal or equivalent as approved by engr-in-charge).

Taking out existing old broken short rail from chairpoy GI 32 mm dia and providing in position 1 nos short rails made out of broken long rail obtained from taking down above item No 27(d) including threading on both ends complete fixing all as specified and shown on drg (Note : U/S check nuts to be replaced in above item and measured and paid as supply only under relevant items.

Taking out existing old broken legs from chairpoy GI 32mm dia and providing 01 Nos new legs in position made out of old broken long rail/ short rail obtained from taking down above item No 27 (d) & 27(e) and S & F 3mm thick and 40 mm dia MS plate welded at bottom of leg and two Nos MS clamp made out of 25x3mm size FI welded legs including threading on top and painting of clamp with two coat of synthetic enamel paint over a coat of oxide primer and complete all as specified and directed by engineer-in-Charge.

Opening of joints of GI Chairpoy of 32 mm pipe where repaired and reassembling incl provision at bottom of legs shall be plugged with 3mm thick mild steel sheet welded to bottom of legs and hard wood plugs shall not be provided.

Supply and welding 02 Nos flat iron 25mmx3mm mild steel clamp made to shown on drawing shall be welded to all galvanised iron legs. Bottom of lower clamp shall be 275mm from top of Horizontal rails. Bottom of lower clamp shall be plugged with 2mm thick mild steel sheet.

Removing of U/S Flat Iron and providing and fixing of new flat iron strip of size 900x32x5mm by welding to the Long rail as shown in the drawing all as specified and directed by engr-in-charge.

Removing of unserviceable Plywood and supply and fixing 12mm thick ply wood commercial BWR plywood ISI marked Make: KitPly/ Century/ Archid Ply or equivalent as approved by engr-in-charge and fixing same with bolts nuts and washers, bolts of size 5x65mm 12 nos round countersunk head bolts complete all as directed including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing complete all including labour for handling, shifting of furniture and equipement on site as well as on yard by contractor's own arrangement as specified and as per direction by Engr-in-charge.

Removing of unserviceable Plywood and supply and fixing 08 / 12 mm thick ply wood commercial BWR plywood ISI marked Make: KitPly/ Century/ Archid Ply or equivalent as approved by engr-in-charge and fixing same with bolts nuts and washers, bolts of size 5x35 mm 16 nos round countersunk head bolts complete all as directed including tightening of loose frame/fixing / repairing of charpoy GI pipe folding's component by riveting/ screwing / welding as required to make the frame fit for fixing complete all including labour for handling, shifting of furniture and equipement on site as well as on yard by contractor's own arrangement as specified and as per direction by Engr-in-charge.

M&L for scrubbing, derusting and applying two coat of synthetic Olive green / silver gray or approved colour enamel paint (spray painting) incl preparation of surface by derusting , scraping and straigtening bent part part of metal frame including handling, shifting of furniture and equipement on site as well as on yard by contractor's own arrangement all as directed by Engr - In - charge for Bed hard steel.

REPAIR TO CHARPOY MS BOX SECTION WITH PLY WOOD TOP :- (a) Removing of unserviceable plywood 12 mm thick and supply and fixing 12mm thick ply wood commercial BWR plywood ISI marked Make: KitPly/ Century/ Archid Ply or equivalent as approved by engr-in-charge complete all as per specified and as direction by Engr-in-charge.

M&L for scrubbing, derusting, rerpairing the deshaped portion of the frame and applying two coat of synthetic enamel paint (spray painting) of black or approved colour incl preparation of surface all as directed by Engr - In - charge for Charpoy MS Box section with plywood top

S&F in repair rubber shoe black for 32mm Square pipe suitable for legs of Charpoy MS Box section with plywood top.

REPAIR TO TABLE OFFICE (OFFICER/CLERK) STEEL Repair to table office (officer/clerk) steel as appended below complete all as specified and shown in drawing including supply of meterial and labour as required. (a) Dismantling of unserviceable table top and providing new top of 18mm thick prelaminated particle board with melamine face one side & other side balancing white with 4mm thick teak wood edging incl polishing of wood edging all around all as specified and directed. (i) for table office officer steel (1800mm x1200mm)

For table office officers (1680mm x 870mm)

For table office clerk steel (1200mmx900mm)

Gas welding to all broken joints of table office officer/clerk

Repairing to the drawers of table office officers /clerk steel, making good dents, proper alignment for smooth function of drawers including removing of unserviceable locks of drawer and handle as per existing shape and size and supply & fixing new locks and handle as per existing shape and size with key in triplicate as specified in drg

Scraping of all existing paints by any means inside & outside of drawer & legs and applying one coat of olive green paint (glossy finish) on surfaces by spray painting after derusting and surface preparation. (i) for table office officer steel

(ii) for table office clerk steel

(e ) S &F of rubber shoe with new rubber shoe of superior quality with suitable size complete all as directed by Engr-in-Charge.

REPAIR TO TABLE STEEL 900 X 900 X 760 MM :- (a) Removing of U/S top and S & F new top 18/ 19mm thick pre-laminated particle board exterior grade ISI Marked teak finish on one side and other side balancing white with 4 mm thick teakwood beading all-round the top of table steel 900x900x760mm duly polished as shown in drg and specified Make-Novapan/Kitlam/archid

(b) Gas welding to all broken joints of table Steel 900mm x900mm x760mm including Cutting of worn out/broken legs of table steel and replace with new square MS pipe 1.6mm thick 75mm to 100m long and fixing with gas welding complite

(c ) S &F of rubber shoe with new rubber shoe of superior quality with suitable size complete all as directed by Engr-in-Charge.

(d) Scraping of all existing paints by any means inside and out side of drawer and legs & applying one coat of olive green paints one inside surfaces and out side surfaces by spraying.

REPAIR TO TABLE 900MM X 600MM X 760MM WITH DRAWER /WITHOUT DRAWER STEEL Dismantling of unserviceable components of Table 900mm x 600mm x760mm with drawer and w/o drawer steel and providing new components all as specified, directed and shown in drg. (a) Dismantling of unserviceable table top and providing new top of 18 mm thick prelaminated particle board ISI marked exterior grade with melamine face on one side and balancing white on other side, and fixing 4 mm thick teak wood edging duly polished all around of the top as specified and shown on Drg and as directed by Engr-in-Charge Make-Novapan/Kitlam/Archid

Gas welding to all broken joints of table 900mm x600mm x760mm with drawer/ without drawer Steel

Repairs to the drawer of table steel making good dents, proper alignment for smooth function of drawer including removing of unserviceable lock & PVC handle of drawer and supply & fixing new lock with key in duplicate & handle as spececified in drg.

Scraping of all existing paints by any means inside and out side of drawer and legs & applying one coat of olive green paints one inside surfaces and out side surfaces by spraying.

S &F in repair /replacement of rubber shoe of superior quality with suitable size complete all as directed and specified in drg.

REPAIR TO TEAPOY VERANDAH (a) Welding of all broken joints of MS member of Teapoy Varandah all as specified and directed .

Painting to complete frame of Teapoy Varandah with one coat of paint white synthetic enamel complete after surface preparation , derusting, straightening of bent metal frame part etc. all as directed.

Dismantling of unserviceable top of Teapoy Varandah and providing new top of 18mm thick melamine faced prelaminated particle board and other side balancing white of size 900mm x 450mm all as directed and shown in drg,including 3mm thick teak wood edging around the top.

REPAIR TO TABLE BED SIDE (MAP):-Dismantling of the following unserviceable components of Table bed side and providing new components in lieu all as specified, directed and shown in drg. (a) Ply wood of back side of Table bed side with 6mm thick plywood BWR type Including hard wood stopper .

(b) Gas welding to broken joints of Table Bed side Steel Frame of 18mm square pipe.

(c) Top of table bed side with prelaminated particle board of existing size with PVC edging all around .

(d) Removal of old unserviceable telescopic channel MS/SS of drawer and S& F new telescopic channel SS of existing size and of best quality as approved by engr-in-charge.

(e ) Side of table bed side with prelaminated particle board of existing size & shape.

( f) Replacement of rubber shoes with S & F new rubber shoe of superior quality of suitable size complete all as directed by Engr-in-Charge.

REPAIR TO TABLE CENTRE WITH GLASS TOP BRASS/STEEL :- (a) Removing of unserviceable/broken glass top of table centre brass, Steel and S &F 10mm thick tinted toughened glass top as approved by engr-in-charge of existing size / shape or as per drg as directed and specified with cornor / edges of the top of table rounded and chamfered as shown in drawing including vacum rubber shoes for the top of legs and PVC shoes for the bottom of the legs complete all as per specified and as direction by Engr-in-charge.

Dersuting, scraping, surface preparation of the metal frame of table centre brass / steel and polishing / buffing / painting as required as per existing drg or as directed by engr-in-charge.

REPAIR TO CHAIR SCHOOL WITH HAND BOARD , METHODEX :- (a) Removal of u/s hand board and supply and fixing hand board made of 18mm thick melamine faced prelaminated particle board and other side balancing white of existing size and shape or as per drawing.

Removal of U/S Foam seat bottom & back complete and S&F new Foam make Sleepwell or equivalent as approved by Engr-in-charge with superior grade premium leatherite cloth in colour and pattern as approved (rate not less than Rs 350/Mtr) including removing of U/S ply wood and fixing of ply wood as per existing shape, size and design all around as per existing shape, size and design as required.

Removal of U/S Cushion Cover and supply & fixing of superior grade premium leatherite cloth in colour and pattern as approved, for Seat back & bottom both (rate not less than Rs 350/Mtr) as approved by engr-in-charge as per existing shape, size & Design as directed

Supply and Fixing of rubber shoes of premium quality as per existing shape, size & design for the chair school with hand board as directed and specified by engr-in-charge.

M&L for scrubbing and derusting, denting / repairing of de-shaped portion of frame and metal strips and applying one coat of primer and over it two coat of synthetic enamel paint (spray painting) of approved colour incl preparation of surface all as directed by engr-in-charge.

MATERIAL & LABOUR FOR SURFACE PREPARATION & PAINTING :- M&L for scrubbing and derusting, denting of de-shaped portion and applying two coat of primer and over it two coat of synthetic enamel paint (spray painting) of approved colour or as per existing colour incl preparation of surface all as directed by Engr-in-charge including transporting , shifting , handling of furniture and equipment at the site and yard as required by contractors' own arrangement for the following :- (a) Rack side 3/4 space steel with tray / rack side steel

Rack Steel 6 tier Open / Close

Rack Steel 900X450X2400mm / 6' x 2' x 6' / 6' x 2' x 5'/ Rack store steel / Rack Stationory Steel

Rack Pigeon Hole Steel

Rack Shoe Steel

Cabinet Filing Steel

Chair Lobby 3 Seater steel with arms/ chair visitor 3 seater

Stool Steel 2' / 510 mm height

SANDEEP ASSOCIATES

Shivam Enterprises

M/S CHANDER SHEKHAR