Extension to Senior Executive Canteen in RWR DC, HAL DC Including Civil , Electrical Works.

HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION

NAME OF THE WORK: Extension to Senior Executive Canteen in RWR & DC, HAL [DC] – [Including Civil & Electrical Works]. CONTRACT NO. HAL/FMD/C-101/24-25

Name of the Contractor :

Sl. No. Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with relevant CPWD specifications amended upto date/ detailed technical specification in tender document and tender drawings if any.

Part 'I' - Civil Works

1 Demolishing cement concrete manually / by mechanical means including disposal of material of any description, etc., complete as per direction of Engineer-in-Charge. 2.00 Cu m 2236.42 Rupees Two Thousand Two Hundred Thirty Six and Forty Two Paise Only 4472.84

2 Demolishing brick work in cement mortar manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material, etc., all complete as per direction of Engineer-in-Charge. 4.00 Cu m 1892.76 Rupees One Thousand Eight Hundred Ninety Two and Seventy Six Paise Only 7571.04

3 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts, etc., complete and stacking within 50 metres lead of area 3Sq metres and below, including stacking material and handing over the useful materials to HAL maintenance department and disconnecting the service lines if any all as instructed by Engineer-in-Charge. 4.00 Each 337.36 Rupees Three Hundred Thirty Seven and Thirty Six Paise Only 1349.44

4 Earth work in all kinds of soil surface excavation not exceeding 30cm in depth but exceeding 1.50m in width as well as 10Sq m on plan including getting out and disposal of excavated earth upto 50m and lift up to 1.50m, etc., all complete as directed by Engineer-in-Charge. 60.00 Sq m 119.30 Rupees One Hundred Nineteen and Thirty Paise Only 7158.00

5 Earth work in all kinds of soil excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.50m in width as well as 10Sq m on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.50m, etc., all complete as directed by Engineer-in-Charge. 80.00 Cu m 163.08 Rupees One Hundred Sixty Three and Eight Paise Only 13046.40

6 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations, etc., in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.50m, etc., all complete as per direction of Engineer-in-Charge. 50.00 Cu m 180.07 Rupees One Hundred Eighty and Seven Paise Only 9003.50

7 Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 5km, also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, sides of foundation, etc., complete as per direction of Engineer-in-Charge. 30.00 Cu m 643.57 Rupees Six Hundred Forty Three and Fifty Seven Paise Only 19307.10

8 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading beyond 50m initial lead, for all leads upto 10Kms including all lifts involved, etc., all complete as per direction of Engineer-in-Charge. 30.00 Cu m 673.75 Rupees Six Hundred Seventy Three and Seventy Five Paise Only 20212.50

9 Providing and laying 1:4:8 (1 Cement : 4 coarse sand: 8 graded stone aggregate 40mm nominal size). For Foundation, floor bed, etc., all complete as per direction of Engineer-in-Charge. 15.50 Cu m 6258.38 Rupees Six Thousand Two Hundred Fifty Eight and Thirty Eight Paise Only 97004.89

10 Providing and laying 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) For Plinth Course, etc., all complete as per direction of Engineer-n-Charge. 2.50 Cu m 7238.20 Rupees Seven Thousand Two Hundred Thirty Eight and Twenty Paise Only 18095.50

11 Plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) 6 graded stone aggregate 20mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation leveling & dressing & finishing the top smooth, etc., complete as per direction of Engineer-in-Charge. 25.00 Sq m 688.41 Rupees Six Hundred Eighty Eight and Forty One Paise Only 17210.25

12 Providing and laying in position ready mixed cement concrete M25 grade for plain cement concrete work;using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS:9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the Engineer-in-Charge; for the following grades of concrete.

a) All works upto plinth level 14.00 Cu m 8732.29 Rupees Eight Thousand Seven Hundred Thirty Two and Twenty Nine Paise Only 122252.06

b) All works above plinth 19.00 Cu m 9059.03 Rupees Nine Thousand Fifty Nine and Three Paise Only 172121.57

13 Centering and shuttering including strutting, propping etc. and removal of form work, etc., all complete as per direction of Engineer-in-Charge for:

a) For foundations, footings, Pedestal and plinth beams and similar work; vertical or to batter. 40.00 Sq m 360.28 Rupees Three Hundred Sixty and Twenty Eight Paise Only 14411.20

b) form work to sides of columns. 60.00 Sq m 883.18 Rupees Eight Hundred Eighty Three and Eighteen Paise Only 52990.80

c) form work to sides and soffits of floor or roof beams, beams haunchings, girders, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., 130.00 Sq m 851.89 Rupees Eight Hundred Fifty One and Eighty Nine Paise Only 110745.70

d) form work to chullah hoods, chajjas, troughs and similar items including edges 10.00 Sq m 873.81 Rupees Eight Hundred Seventy Three and Eighty One Paise Only 8738.10

14 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level and for window grill. Thermo-Mechanically Treated bars of grade Fe-500D or more, etc., all complete as per direction of Engineer-in-Charge. 4350.00 Kgs 99.08 Rupees Ninety Nine and Eight Paise Only 430998.00

15 Providing and fixing M.S. grills to openings / wooden frames with rawl plugs screws, etc., of required pattern in frames of windows, etc., with M.S. flats, square or round bars, etc., including priming coat with approved steel primer, etc., all complete as per direction of Engineer-in-Charge. 250.00 Kgs 218.98 Rupees Two Hundred Eighteen and Ninety Eight Paise Only 54745.00

16 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand), etc., all complete as per direction of Engineer-in-Charge. 3.00 Sq m 1057.00 Rupees One Thousand Fifty Seven Only 3171.00

17 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand), etc., all complete as per direction of Engineer-in-Charge. 20.00 Cu m 8365.90 Rupees Eight Thousand Three Hundred Sixty Five and Ninety Paise Only 167318.00

18 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand), etc., all complete as per direction of Engineer-in-Charge. 20.00 Cu m 6717.06 Rupees Six Thousand Seven Hundred Seventeen and Six Paise Only 134341.20

19 Flush / Ruled pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand) , finishing, etc., all complete as per direction of Engineer-in-Charge. 15.00 Sq m 354.08 Rupees Three Hundred Fifty Four and Eight Paise Only 5311.20

20 Plastering in cement mortar 1:6 (1 cement : 6 fine sand) 15mm thick to brick work or concrete surfaces finished smooth with neeru finish for internal surfaces and fair finish for external surface including scaffolding, curing, etc., all complete as per direction of Engineer-in-Charge. 200.00 Sq m 363.22 Rupees Three Hundred Sixty Three and Twenty Two Paise Only 72644.00

21 Plastering in cement mortar 1:4 (1 cement : 4 fine sand) 12mm thick to Concrete surface and roof terrace finished smooth with neeru finish including scaffolding, curing, etc., all complete as directed by the Engineer-in-Charge. 170.00 Sq m 318.85 Rupees Three Hundred Eighteen and Eighty Five Paise Only 54204.50

22 Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm 8.00 Sq m 4718.66 Rupees Four Thousand Seven Hundred Eighteen and Sixty Six Paise Only 37749.28

23 Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble / Granite / stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges, etc., all complete as per direction of Engineer-in-Charge. 4.00 Nos 899.16 Rupees Eight Hundred Ninety Nine and Sixteen Paise Only 3596.64

24 Providing and fixing White Vitreous China Flat back oval shape wash basin (under counted ) of suitable shape and size [550x 400 mm (Minimum) with single 15 mm C.P. brass pillar tap with C.I. brackets, 15 mm C.P angle cock with necessary connection pipes, 32 mm C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require, etc., all complete as directed by the Engineer-in-Charge. 4.00 Nos 1726.47 Rupees One Thousand Seven Hundred Twenty Six and Forty Seven Paise Only 6905.88

25 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre / Sq m by the samemembrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints, etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane, etc., all complete as directed by Engineer-in-Charge. Note: A performance guarantee bond for 5 years on non-judicial stamp paper of Rs. 500/- shall be given by the contractor. The 10% of completed value of this item shall be dedcuted as defect liability deposit and the same shall be returned after sucessful completion of 5 years from the date of completion of contract / project as a whole. 90.00 Sq m 493.77 Rupees Four Hundred Ninety Three and Seventy Seven Paise Only 44439.30

26 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes. 110mm diameter, etc., all complete as per direction of Engineer-in-Charge. 15.00 R m 346.73 Rupees Three Hundred Forty Six and Seventy Three Paise Only 5200.95

27 Supplying and fixing in position as per direction of EIC second class hard wood (Mathi wood) as approved by HAL, Plain, solid, straight chowkats frame work for doors of approved design,framed rebated on solid, rounded or chamfered, put together with glue pinned at joints. The timber shall be seasoned to a moisture content not more than 12% as per IS 287 and conforming to IS 1141 and treated with anti termite treatment by painting with tar or coal tar black paint (approved make) the ends of posts and back of chowkats complete, including rebating for fixing the shutters and fixing necessary holdfasts with screws etc., as directed by Engineer-In-Charge (Sample to be got approved before ordering). 0.08 Cu m 107050.56 Rupees One Lakh Seven Thousand Fifty and Fifty Six Paise Only 8564.04

28 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, 30mm thick including ISI marked Stainless Steel butt hinges with necessary screws, etc., all complete as per direction of Engineer-in-Charge. 3.00 Sq m 2910.48 Rupees Two Thousand Nine Hundred Ten and Forty Eight Paise Only 8731.44

29 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kgs to 80 kgs and door width from 701mm to 1000mm), with double speed adjustment with necessary accessories and screws, etc., all complete as per direction of Engineer-in-Charge. 2.00 Nos 903.25 Rupees Nine Hundred Three and Twenty Five Paise Only 1806.50

30 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete as per direction of Engineer in Charge. 2.00 Nos 785.19 Rupees Seven Hundred Eighty Five and Nineteen Paise Only 1570.38

31 Providing and fixing 150mm long aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws, etc., all complete as per direction of Engineer-in-Charge. 2.00 Nos 75.84 Rupees Seventy Five and Eighty Four Paise Only 151.68

32 Providing and fixing aluminium hanging floor single rubber door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws, etc., complete as per direction of Engineer-in-Charge. 2.00 Nos 36.38 Rupees Thirty Six and Thirty Eight Paise Only 72.76

33 Providing and fixing 125mm dia aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws, etc., complete as per direction of Engineer-in-Charge. 2.00 Nos 60.86 Rupees Sixty and Eighty Six Paise Only 121.72

34 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.60mm thick with flanges of 27mm and 37mm, at 1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.50mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of [25 x 10 x 0.50]mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels [45 x 15 x 0.90]mm running at the spacing of 1200mm centre to centre, to which the ceiling section 0.50mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.50mm, at 450mm centre to centre, 65.00 Sq m 1245.61 Rupees One Thousand Two Hundred Forty Five and Sixty One Paise Only 80964.65

shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm dia x 230mm long G.I. wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size [3.50 x 25]mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, etc., all complete as per drawings, specification and direction of the Engineer-in-Charge 12.50mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks), etc., all complete as per direction of Engineer-in-Charge.

35 Providing and laying [600 x 600]mm vitrified floor / skirting tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.30kg/Sq m including grouting the joints with white cement and matching pigments, etc., all complete as per direction of Engineer-in-Charge. 140.00 Sq m 1427.20 Rupees One Thousand Four Hundred Twenty Seven and Twenty Paise Only 199808.00

36 Providing and applying internal wall and ceiling painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50grams / litre after applying white cement based putty of average thickness 1mm over the plastered wall surface including preparation of the surfces, with a coat of low VOC primer with emery paper to bring to smooth and even including applying additional coats wherever required to achieve even shade and colour of approved brand, etc., all complete as per direction of Engineer-in-Charge. 350.00 Sq m 342.50 Rupees Three Hundred Forty Two and Fifty Paise Only 119875.00

37 Painting / Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt esistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10Sq m. Over and including priming coat of exterior primer applied @ 0.90 litre/10 Sq m, etc., all complete as per direction of Engineer-in-Charge. 300.00 Sq m 166.52 Rupees One Hundred Sixty Six and Fifty Two Paise Only 49956.00

38 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats to MS Grill work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, etc., all complete as per direction of Engineer-in-Charge. 35.00 Sq m 207.86 Rupees Two Hundred Seven and Eighty Six Paise Only 7275.10

39 Providing and fixing factory made uPVC glazed / wire mesh windows / doors comprising of lead free uPVC multi-chambered frame, sash and mullion / coupler (where ever required) extruded profiles having minimum wall thickness of 1.70mm for Series R1 and R2 profiles and 2.10mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws, etc., Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded / mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water, etc., 20.00 Sq m 8084.13 Rupees Eight Thousand Eighty Four and Thirteen Paise Only 161682.60

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod pf approved size and quality, etc., all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened / laminated / double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS:16231 shall be paid separately. Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R3 series with frame (55mm & above) x (40mm & above) & sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height upto 1.8m)

40 Providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers, etc., complete all as directed by Engineer-in-Charge. (Qty is certified per bag of 50kg cement used in the mix ) 25.00 Per Litre 20.31 Rupees Twenty and Thirty One Paise Only 507.75

41 Supplying and Fixing of "SUNLOCK / PRESTER / HILUX or other equivalent" delux model 100mm width fabric washable scotch guard horizontal / Vertical / horizontal blinds using powder coated aluminium channel and fittings with complete accessories including capping on both sides, etc., all complete as directed by the Engineer-in-Charge. 18.00 Sq m 1059.32 Rupees One Thousand Fifty Nine and Thirty Two Paise Only 19067.76

Sub-Total of Part 'I' - Civil (Excluding GST) Rupees Twenty Three Lakh Seventy Six Thousand Four Hundred Seventy One and Twenty Two Paise Only 2376471.22

Part 'II' - Electrical Works

1 Supply, fixing, testing & commissioning of the following factory built powder coated Double door MCB/MCCB DB of any approved make fabricated out of M.S. sheet steel enclosure & necessary cutouts for operating the MCB knobs & comprising of 200 amps tinned copper busbars & earthing bus with tapped holes including internal wiring with stranded copper PVC wires or suitable size copper strips etc. & fixing the DB in flush with wall/ on wall as per site requirement with necessary M.S. angle supports, chipping the wall and replastering to smooth finish etc., wherever required as per site condition, complete in all respects, as directed by Engineer-in-charge and comprising the following as detailed below:

a) 4 way (4 + 12), Double door Vertical MCCB DB 1.00 Nos 7271.41 Rupees Seven Thousand Two Hundred Seventy One and Forty One Paise Only 7271.41

b) 125 A, 415V 36KA, FP MCCB 1.00 Nos 7946.08 Rupees Seven Thousand Nine Hundred Forty Six and Eight Paise Only 7946.08

c) 6-32 amps. ratings, SP MCB, "C" curve, 10 KA breaking capacity. 5.00 Nos 247.80 Rupees Two Hundred Forty Seven and Eighty Paise Only 1239.00

d) 32 amps. ratings, TP MCB, "C" curve, 10 KA breaking capacity. 5.00 Nos 974.75 Rupees Nine Hundred Seventy Four and Seventy Five Paise Only 4873.75

2 Wiring for light point / fan point / exhaust fan point/call bell point from nearest switch box with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, fan regulator, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (as per detailed CPWD specifications for Group C wiring)

a) Wiring to single light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects. 8.00 Pts 1420.02 Rupees One Thousand Four Hundred Twenty and Two Paise Only 11360.16

b) Wiring to exhaust/wall mounting fan point using 6A, 250V gr. flush type modular SP switch housed along with other lighting switches/separate switch box if required and 3pin 6A, 250V gr. modular type socket housed near the exhaust fan complete in all respects. 5.00 Pts 1420.02 Rupees One Thousand Four Hundred Twenty and Two Paise Only 7100.10

3 Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

a) 3 Runs x 2.5 sq. mm 100.00 Mtr 266.19 Rupees Two Hundred Sixty Six and Nineteen Paise Only 26619.00

b) 3 Runs x 4 sq. mm(For 6A & 16A power points) 80.00 Mtr 323.30 Rupees Three Hundred Twenty Three and Thirty Paise Only 25864.00

4 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

a) 3 pin 6A Socket outlet 14.00 Each 118.09 Rupees One Hundred Eighteen and Nine Paise Only 1653.26

b) 6A Switch 6.00 Each 99.70 Rupees Ninety Nine and Seventy Paise Only 598.20

5 Supplying and fixing of follwing size GI box in flush with wall including cutting the wall and making good finish with same.

a) 2 Module 5.00 Nos 288.45 Rupees Two Hundred Eighty Eight and Forty Five Paise Only 1442.25

b) 8 Module 4.00 Nos 389.13 Rupees Three Hundred Eighty Nine and Thirteen Paise Only 1556.52

6 Supplying and fixing of 25MM size of medium class PVC conduit along with accessories in recess including cutting the wall and making good the same as required. 80.00 Mtr 140.36 Rupees One Hundred Forty and Thirty Six Paise Only 11228.80

7 Supply & laying in the already excavated cable trench/fixing on wall/duct wall with necessary M.S clamps / encasing in pipes etc., testing & commissioning of 3.5Cx50 Sqmm XLPE insulated Aluminium conductor 1100V gr. Armoured U.G cables complete in all respect as directed by EIC and as per technical specification. 25.00 Meter 350.85 Rupees Three Hundred Fifty and Eighty Five Paise Only 8771.25

a) Supplying and making end termination with brass compression gland and aluminium lugs for 3.5CX50Sq.mm of PVC insulated and PVC shielded/XLPE aluminium conductor cable of 1.1KV grade as required 2.00 Sets 399.78 Rupees Three Hundred Ninety Nine and Seventy Eight Paise Only 799.56

8 Supply, fixing in flush with the false ceiling including suitable fixing arrangment using Chain links, testing & commissioning of recess mounting type square(2'X2') LED lighting fixture of wattage not exceeding 36watt made out of white powder coated CRCA housing/ aluminium housing, front frame with translucent /polycarbonate cover including control gear. The luminaire should have Lumen efficacy ≥100 lm/watt and lumen output not less than 3600lumens with PF >0.9 and Colour temperature shall be ≥5700K operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V including necessary interconnections and other standard accessories complete in all respects and as directed by Engineer incharge. LED used in the lighting fixtures should be one of the approved make. LM79 certification for luminaires & LM80 certificate for LED shall be produced.The LED Light fixture shall be of Crompton model no:LCTLRNE-36W-FO-CDL/Equivalent model in other approved makes luminaries which meets the above technical specification. LED used in the luminaire should be one of approved make as per approved make list of HAL. 8.00 Nos 2580.51 Rupees Two Thousand Five Hundred Eighty and Fifty One Paise Only 20644.08

a) Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 1.00 Each 7232.69 Rupees Seven Thousand Two Hundred Thirty Two and Sixty Nine Paise Only 7232.69

b) Supplying & laying 25 mm X 5 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50mm) 25.00 Meter 236.19 Rupees Two Hundred Thirty Six and Nineteen Paise Only 5904.75

10 Supplying and fixing 32A industrial Plug and socket along with 20A MCB in sheet steel enclosure on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commisioning etc. as required 2.00 Each 2451.69 Rupees Two Thousand Four Hundred Fifty One and Sixty Nine Paise Only 4903.38

Sub-Total of Part 'II' - Electrical (Excluding GST) Rupees One Lakh Fifty Seven Thousand Eight and Twenty Four Paise Only 157008.24

Total of Part 'I' + 'II' (Excluding GST) Rupees Twenty Five Lakh Thirty Three Thousand Four Hundred Seventy Nine and Forty Six Paise Only 2533479.46

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 2533479.46 BELOW % 2533479.46

Add 18% GST Rupees Four Lakh Fifty Six Thousand Twenty Six and Thirty Paise Only 456026.30

Grand Total (Including GST) Rupees Twenty Nine Lakh Eighty Nine Thousand Five Hundred Five and Seventy Six Paise Only 2989505.77

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

Facilities Management Division

Pre-Qulification Profile (To Be uploaded along with Part A)

Tender Ref No. or Contract No.: HAL/FMD/C-101/24-25

Name of Work: Extension to Senior Executive Canteen in RWR & DC, HAL [DC] – [Including Civil & Electrical Works].

Estimated Amount in Rs.: 2990000

Tender Notice Date : 23.11.2024

PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3

Sl.No Description Details Enclosed / Not Enclosed Remarks

1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual/firm/company

2 Type of ownership PlsEnter Type of Ownership

If Other, please specify

3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc., Pls enter Details of Constitution

4 Address for correspondence: Pls Enter Address

5 (a) PAN No.: Pls Enter Pan NO

5 (b) Service Tax Registration No

5 (c ) Goods and Service Tax ID No.

6 Contact details

Contact person name Please Enter Contact person Name

Mobile No. Pls Enter Mobile No

Ph. No. with STD code

FAX No. with STD code 3 #N/A

7 Registered Contractor

If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1

Registration No. 199999 7 F 2

Category 200000 6 G 3

PEMD Amount ( If paid ) 499999 6 H 4

8 I.T Returns for past 03 years 999999 5 J 6

2024-25 Pls Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7

9 Average annual financial turn over during the last 3 years, ending 31st March 2024 of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3

YEAR TURN OVER IN Rs. Enclosed / Not Enclosed REMARKS 5000000 2

2023- 2024 Rs. Pls Enter Turn over in Rupees for all the 3 years 7499999 2

Average annual Financial turn over 0.00 897000.00

Avg Annual Turnover criteria is not met 10000000 1

10 ESI & PF Nos with proof Nos Enclosed / Not Enclosed

ESI Registration No/. with proof if any Remarks if any

PF Registration No. with proof if any

11 Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Name of the Bank

Type of Account

12 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission solvency cal

Name of Bank & Branch Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs #REF! 28-Jun 0 40000

Date of Issue 200000 40000

Value in Rs. 200001 150000

Solvency value is NOT as per NIT

13 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender. 1196000 500001 250000

Completed similar works during last 7 years Pls Select %of similar works completed during last 7 years 1000000 250000

Work NoI Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000

Brief Description of Work: Please enter Details for Work No 1 2000000 500000

Completed value of Work in Rs. 2000001 1000000

Date of Commencement of Work 4000000 1000000

Date of Actual Completion of Work: 4000001 2000000

Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000

Brief Description of Work: Pls Enter Details for Work No II

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work: work done

Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal #REF! 2555

Brief Description of Work: Pls Enter Details for Work No III #REF!

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work:

14 Details of person holding the power of Attorney (If different from contact person)

Name Related Document to be Uploaded to eProcurement Portal

Mobile No. Pls Enter Details for Person holding Power of Attorney

Ph. No. with STD code

FAX No. with STD code

15 DECLARATION I

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.

16 DECLARATION II

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Pls Accept the Delaration II