Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.7 LAccepted-AOC | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹42.4 L+₹2.5 L (6.18%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 bidder | |
| 3 | L3₹42.6 L+₹2.7 L (6.75%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 bidder |
Tender Value
₹47.4 L
EMD Value
₹94,800
Closing Date
4 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 862 EWS
GE 862 EWS Rajouri
SPECIAL REPAIR TO BLDG NO T-49,T-85, T-41, T-42, P-03, P-06-B, P-07-B, P-08-B, T-13, T-14 AND T-19 AT CERTAIN UNITS UNDER AGE B/R DETT-B AND AGE EM OF GE 862 EWS
2024_MES_662902_1
GER-41/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS Rajouri
Please refer tender documents
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹94,800
Yes
4 Oct 2024
29 Jun 2024
6 Sept 2024
29 Jun 2024
4 Sept 2024
15 Jul 2024
29 Jun 2024 - 9 Jul 2024
Amount
Sch 'A' Part-I (B/R works) Demolition of cement concrete (unreinforced) in any position not otherwise specifically provided for including removing debris outside MoD land complete all as specified and directed.
M&L for 75mm thick plain cement concrete 1:4:8, type D-2 using 40mm graded stone aggregates as in sub base, complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4 including dismantling of old tiles, and removing rubbish off the premises complete all as specified and as directed.
M&L for glazed ceramic coloured tiles of size 450x350x7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:4 including dismantling of old tiles, and removing rubbish off the premises complete all as specified and as directed.
M&L for 20mm thick granite black or any other colour, of any type of work (table rubbed and polished) as in steps, jambs, pillars, window - cills, cooking platforms, urinal partition and like set in cement mortar 1:4 including pointed in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including grinding and polishing, complete all as specified and directed.
M&L for vitrified tiles light shade, coloured (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles n. exc 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 including dismantling old tile, complete all as specified and directed.
All as per srl item no 6.00 here-in-before but in skirting including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4, complete all as specified and directed.
Taking down cement plaster, any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in apex stone, coping, benching, hold fasts, water troughs, bed block, surface channel and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work ,complete all as specified and directed.
M&L for complete removal of existing treatment on old plastered wall/roof surfaces including cornices and chajjas etc and applying two coats of exterior emulsion weather proof paint of any approved colour pattern over and including a coat of primer, complete all as specified and directed by Engineer -in - Charge.
M&L for Preparation of newly plastered surface of wall and applying two coats of exterior emulsion weather proof paint of any approved colour pattern over and including a coat of primer, complete all as specified and directed by Engineer -in - Charge.
M&L for complete removal of existing treatment on old plastered wall surfaces including cornices and chajjas etc and applying two coats of distemper oil emulsion, white or tinted including clearcolle on surface for preparation, complete all as specified and directed by Engineer -in - Charge.
M&L for preparation of new plastered surface and clearcolle for priming and applying two coats of distemper oil emulsion, white or tinted, complete all as specified and directed by Engineer -in - Charge.
M&L for preparation of old plastered surfaces of ceiling and applying one coat of distemper oil emulsion, complete all as specified and directed.
Taking down chowkhats or frames (without taking off shutters from the frames) exc 1.5 Sqm and n. exc 4 Sqmm each and removing from site, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Sqm each and removing from site, complete all as specified and directed.
S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square, complete all as specified and and as directed and as shown on drwaing.
M & L for factory made solid PVC panel door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheety strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded.sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.
S&F steel ventilators with top hung shutters including hinges and handle with steel peg stay complete welded, complete all as specified and directed.
S & F of 1.25 mm thick pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates and holdfast including PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate for back filling of frame etc, complete all as specified and directed.
S & F for 35mm thick 2nd plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified.
S & F of 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified.
S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.
S & F of 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.
S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.
S & F in repair 140mm long floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified and directed.
S & F in repair 300mm, mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S& F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40m and fixed with tinned tacks, or galvinsed wire staples including cutting, welding etc for steel window / ventilators, complete all as specified and directed.
M & L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
S&F for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per instructions etc including dismantling old existing ceiling board, complete all as specified and directed.
M&L for mild steel framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forget into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks or portion framed and hung as gates, including pintel hinges, stops, hand made sliding bolt, hold fast etc and similar work conforming to Fe 290 or E-165 work including welded fabricks frames, gate and framed truss etc, including dismantaling old mild steel work, complete all as specified and directed.
M&L for preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified.
M&L for preparation of old wooden surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of old steel surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
S&F for powder coated anodised aluminium three track slinding window, (minimum thickness of power coating not less than 50 micron) with two or more shutter with 4mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle, lock etc including 65x39.5x1.5mm section for complete frame and rubber beading and glazing clips etc including taking down existing old window of any description, complete all as specified and directed. Note:- Glass, wiremesh and all builders hardware are included in the quoted rate. Net area of opening shall be measured for payment purpose.
S&F for anodised aluminium grills 6.3mm dia decorative type 75mm mesh size, complete all as specified and directed
M & L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc, complete all as specified and directed.
M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.
S & F in repairs stainless steel curtain rod of 20mm dia complete as specified and directed by Engr-in-Charge.
S & F stainless steel 'T' and 'L' type brackets with finials complete as specified and directed by Engr-in-Charge.
Demolition of reinforced cement concrete in any position not otherwise specifically provided for, complete all as specified and as directed.
M&L for providing reinforced cement concrete 1:2:4, type B-1 (Nominal Mix) using 20mm graded stone aggregate as in beams, cantilivers, bressmmers, lintles over 1.5 m span, complete all as specified and directed
M & L for TMT bars 10 mm dia and over, cut to length, bent to shape required, incvluding cranking, binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M & L for TMT bars 6 to 8 mm dia, cut to length, bent to shape required, incvluding cranking, binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Formwork to side and soffits of floor or roof beams, beam haunchngs, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc, also splays between floors and beams, etc rough finished surfaces of conrete flat, complete all as specified and directed.
Providing precast cement concrete 1:2:4, type B-0, using 12.5mm graded stone aggregates as in louvres and jallies, 40mm thick (measured solid), including all mouldings but excluding frame and set in cement mortar 1:4, complete all as specified and directed.
M&L for 75mm thick plain cement concrete, type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in plinth protection, laid in slope 1:12 from outer edge of the wall, finished even and fair, laid in alternate bays including providing 6mm wide joints throughtout thickness of plinth protection in concrete bays and in between walling and plinth protection, joints filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight), complete all as specified and directed.
M&L for anti skid stair case tiles for steps & riser full body 12mm thickness set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15mm thick screed bed in cement mortar 1:4 including demolition of old tiles including back coat of PCC complete all as specified and directed.
S & F in repairs for PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors 110 mm dia complete all as specified and directed.
S & F in repairs PVC (SWR) bends of any radius of 110mm dia complete all as specified and directed.
S&F 1mm thick plain, black mild steel sheeting oin ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) complete all as specified and directed.
S&F for powder coating of any colour (thickness of powder coating not less than 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.
S&F for powder coating of any colour (Thickness or powder coating not less than 50 micron) aluminium door shutters of section weighing not less than 0.55 Kg/M including 5mm thick plain/coloured/frosted sheet glass, ACP sheet and stainless steel wiremesh and conneced items such as necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, hinges 150mm long 03 nos, suitable handle 02 Nos, tower bolts, mortice lock and door stopper and other accessories as per site requirement complete all as specified and directed.
S & F for powder coating of any colour (Thickness or powder coating not less than 50 micron) aluminium fixed or openable shutter side hung type without sash bar for windows and ventilator with one or more openable or fixed, aluminium sections weighing 0.55 Kg/M including 5mm thick plain/coloured/frosted sheet glass and stainless steel wiremesh and conneced items such as peg necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long, hinges type B-21, 100mm long 02 Nos, suitable handle 02 Nos, tower bolts, and other accessories as per site requirement complete all as specified and directed.
S&F for sheet glass 5.5 mm thick, ordinary quality and fixed with aluminum & rubber beading in square exc 0.5 sqm in each pane fixed to aluminium door , complete all as specified and directed.
M&L for 12mm thick prelaminated particle board, interior grade both side decorative choice lamination fixed to aluminium doors or similar works, complete all as specified and directed.
Taking up or down 15mm GI tubing and connection including cleaning for refixing or removal to store, complete all as specified and directed.
Taking up or down 20mm GI tubing and connection including cleaning for refixing or removal to store, complete all as specified and directed.
M&L for 15 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors, complete all as specifed and directed.
M&L for 20 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors, complete all as specifed and directed.
S&F in repair for 15 mm bore bib tap cast copper alloy, chromium plated , fancy type, 'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.
M & L in repairs for 15 mm dia fancy type, chromium plated angle valves, cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specifed and directed.
S & F in repair brass CP wall mixer for mixing hot and cold with connection to the over head shower arrangement with connection legs wall flanges, screwed down for 15mm bore iron pipe and fixed, complete all as specified and directed by Engr-in-Charge.
S&F in repair gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia complete all as specified and directed.
S&F in repair gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia complete all as specified and directed.
S & F in repairs brass chromium plated tubular towel rail 20mm dia 600mm long with and including one pair of brass chromium plated bracket complete all as specifed and directed.
S & F in repairs for 125mm dia PTMT grating doom with waste hole for waste pipe ( minimum weight 40 gram) complete all as specified.
S & F in repair for PVC connection pipe 15mm dia with PTMT nuts of length 600mm complete all as specifed and directed.
S &F for 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass errule and fixed complete all as specifed and directed.
S&F in repair for vitreous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, excluding fixing bolts, flushing cistern and flush pipe) complete all as specifed and directed.
S&F in repair for 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.
Supply and fixing in repair viterous China wash basin, white flat back, size 550x400mm (excluding taps, waste chain and plug and porcelan stopper) but including brackets, including cutting for and pinning in ends of brackets complete all as specified and directed.
S & F in repairs for 15 mm bore brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
M & L for 75 mm dia cast iron floor trap, with grating including jointing to waste pipe, complete all as specified and directed.
S & F in repairs for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with and including clamps, complete all as specified and directed.
S & F in repair PVC (SWR) bends of any radius of 75mm dia any radius with access door complete all as specified and directed.
S&F in repair for CP soap dish holder with chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed
S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 500 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple, union etc and fixed after dismantling of old unserviceable tank, complete all as specifed and directed.
S & F 75mm dia PVC (SWR) vent cowl, complete all as specified and directed.
S & F overhead shower of 100mm dia round shape single flow (ABS body chromium plated with grey face plate) with rubit cleaning system, complete all as specified and directed.
S&F in repair PVC waste pipe 900mm long suitable for Wash hand basins and urinals including connecting complete all as specifed and directed.
M&L for cement concrete 1:2:4, type B-2 (using 40 mm graded crushed stone aggregates) as in surface channel and drains, complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc, complete all as specified and directed.
Demolition of plain cement concrete (unreinforced) in any description in ground floor and paving not exc 15cm thick complete all as specified and as directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of chalk whitning including a coat of wall care putty 3mm thick, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of chalk whitning, complete all as specified and directed.
M&L for preparation of old plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of chalk whitning including a coat of wall care putty 3mm thick, complete all as specified and directed.
S&F for powder coated aluminium door with frame and shutters (minimum thickness of powder coating not less than 50 micron), made out of extruded anodised extruded aluminium section conforming and as specified in IS-737, or 101.6mm x 44.45mm x 1.27mm, fixed with and including anodised aluminium butt hinges, tower bolt, glazing clips and locking arrangement, hydraulic door closer, floor spring, snap beading, handles and 5mm thick plain sheet glass, PVC sheet or particle board and connected items, with and including making good to the disturbed portion with its original spcifications fixed as in repair, complete all as specified and directed.
S&F for 4 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in squares not exc 0.50 sqm in each pane, complete all as specified and directed.
S & F of 125 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.
S&F in repair for CP shower rose of size 125 mm with swivel joints fixing to steel pipes etc. Complete as all as specified and directed.
S&F for sheet glass shelf assembly consisting 5.5 mm thick, sheet glass shelf 12cm wide with chromium plated bracket guard and rainling 60cm long, complete all as specified and directed.
S & F in repair 15mm CP brass Health faucet with 1.2 meter long stainless steel hose and wall hook complete all as specified and directed by Engr-in-Charge.
M&L for RCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in slab supported on walls, beams and columns in floor, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, including demolition of old RCC work, complete all as specified and directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, landings and similar work; n exc 200mm thick (Horizontal and sloping) for rough finished surface of concrete, complete all as specified and directed.
M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide, complete all as specified and directed.
S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple and 20mm bore ball brass valve with union screwed for iron pipe and fixed including dismantling of old unserviceable tank, complete all as specifed and directed.
S&F in repair fancy type curtain rod powder coated 20mm dia (of approved colour and design) complete all as specified and directed by Engineer-in-Charge
S&F in repair for brackets with finials of fancy type (of approved colour and design) for curtain rod powder coated 20mm dia including fixing to walls with MS full screws including fixing of wooden pieces of required size to walls complete all as specified and directed by Engineer-in-Charge.
S&F of Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws incl dismantling of old sheet of any description all as specified and as directed by Engr-in-Charge.
S& F of Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws incl dismantling of old sheet of any description all as specified and as directed by Engr-in-Charge.
Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work, complete all as specified and directed.
M&L for Joist, channel, angle, MS tubular pipe or tee sections, fixed independently, with or without connecting plates, etc. cut to ordinary lengths i.e. within 20mm of the length indicated, complete all as specified and directed.
S & F in repairs for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or floor, complete all as specified and directed.
S & F in repairs for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed for valley/ eaves gutters or rain water pipe with all fittings such as elbow, Equal tee, coupling, Y-section etc including MS clamp for fixing to wall, complete all as specified and directed.
M&L for coloured chequered cement concrete tiles of size 30 cm x 30cm x 25 mm thick set, jointed in neat cement slurry and pigment in floor and pointed in white or coloured (apporved by GE) cement to match the shade of tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 after dismantling of old unserviceable tiles etc and removing rubbish off the premises complete all as specified and as directed.
Fixing only 15mm bore GI tubing medium grade with all fittings fixed to wall or laid in floor including cutting chases for water tubing or concealed etc and making good to disturbed wall, complete all as specified and directed.
Fixing only 20mm bore GI tubing medium grade with all fittings fixed to wall or laid in floor including cutting chases for water tubing or concealed etc and making good to disturbed wall, complete all as specified and directed.
S & F in repair PVC (SWR) bends of any radius of 75mm dia any radius, complete all as specified and directed.
S&F in repair for vitreous China water closet (squatt pan) Orrisa pattern 580x440 mm size pan, white, with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe including trap set in concrete and removing debries from site, complete all as specified and directed.
S&F in repair for vitreous China bowl urinal flat back of size 465x355x265 mm white (minimum), with grating and union for discharge pipe excluding flushing cistern and incluidng flush type and waste pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe with grating and union for discharge pipe including connecting to wate pipe, complete all as specified and directed.
S&F in repair for glass corner shelf with tempered glass, stainless steel brackets and polished chrome finish rail, complete all as specified and directed by Engr-in-Charge.
S&F in repair for 15mm bore Stop valve (concealed type), chromium plated, cast copper alloy screwed down, high pressure with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
M & L in repair for 75 mm dia PVC floor trap, with CP grating with or without holes for waste pipe and fixed with white cement, complete all as specified and directed.
M&L for rendering 15 mm thick on concrete surface or fair faces of brick surface on wall in cement mortar 1:4 mixed with water proofing compound @200ml per 50kg of cement and finished surface even and smooth without using extra cement including chicken wiremesh to prevent capillary action on outer surface of wall, complete all as specified and directed.
M&L for rendering 15 mm thick on concrete surface or fair faces of brick surface on wall in cement mortar 1:4 mixed with water proofing compound @3% of cement and finished surface even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 05 mm thick in cement mortar 1:3 on concrete surface of ceiling, finished surface even and smooth without using extra cement, complete all as specifed and directed.
M&L for preparation of old decorated plastered/un-plastered surfaces of wall including pillar, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying two coats of lime white wash, complete all as specified and directed.
M&L for preparation of old decorated plastered/un-plastered surfaces of ceiling by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of lime white wash, complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall including pillar, cornices etc and applying three coats of lime white wash, complete all as specified and directed.
M&L for Machine cut kota stone slab (mirror polished) flooring 18-20mm thick as in floors and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 15 mm thick in cement mortar 1:4 including taking down old kota stone, complete all as specified and directed.
M&L for Machine cut kota stone slab (mirror polished) flooring 18-20mm thick as in skirting and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 10 mm thick in cement mortar 1:3 including taking down old kota stone, complete all as specified and directed.
M&L for preparation of old plastered/unplastered surfaces of wall and applying one coat of exterior emulsion weather proof paint of any approved colour pattern, complete all as specified and directed by Engineer -in - Charge.
S&F for powder coated (thickness of powder coating not less than 50 micron) anodised aluminium work for doors, windows & ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions, i.e. at top bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws all complete as per architectural drawings, complete all as specified and directed.
S&F in repair for sink with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size 915mm x 460mm, bowl size 410mm x 330mmx 160mm complete all as specified and directed.
S&F in repair for 15mm bore brass chromium plated sink mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.
S&F in repair for assembled ready to use rectangular stainless steel (Grade 304) kitchen plate rack with 3-4 shelves, enclosed four sides by SS plain sheet, 0.6 mm squre support pipes, dedicated holes for spoon, pegs etc cover all size 600mmx750mmx250mm of standard pattern, complete all as specified and directed.
S&F for collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handle etc errected in position and securing runners with holdfasts and brackets complete all as specified and directed.
Sch 'A' Part-II (E/M works) Taking down carefully copper/ aluminum point wiring (light, fan, bell, socket or power) complete, including all fittings such as switches, ceiling roses, pendants, regulators sockets etc.) removing material from the site and making good the disturbed surfaces of walls, floor or ceiling etc. to match with existing specifications, complete all as specified and directed.
M&L for point wiring for one light point/fan point/bell point controlled by one-one way switch with 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor unsheathed in and including PVC casing caping medium grade of 25mm width complete with all acessories including PVC sunk box ISI marked for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS, PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable as earth wire upto common earth and connected to earth dolly including making good the diturbed surfaces to match with the existing, compete all as specified and directed. (Note:- Three run of copper conductor of required size and one run of casing capping measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth)
Description all as per Serial item No 137 above but for one 3 pin 6 Amp socket outlet on independent board controlled by one 6 amp switch, complete all as specified and directed.
Description all as per Serial item No 137 above but for one 3 pin 6 Amp socket outlet on same board controlled by one 6 amp switch, complete all as specified and directed.
Description all as per Serial item No 137 above but for one 3 pin 16 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistraind copper conductor cable with 2.5 sqmm single core multistraind FRLS copper conductor cable as earthling lead, complete all as specified and directed.
S&F for switch piano flush type single pole one way 5 amps 240 volts, complete all as specified and directed.
S&F for socket outlet 2 in 1, 5 pin, 6 amp flush type, complete all as specified and directed.
S&F for switch piano flush type single pole one way 15 amps 240 volts, complete all as specified and directed.
S&F for switch socket combination 2 in 1, 5 pin, 5/15 amp flush type, single pole, 240 volts, complete all as specified and directed.
S&F for Bell push, flush type single pole, 6 Amps 240 volts, complete all as specified and directed.
S&F for call bell AC, 230 volts, single pole, ding-dong sound type, complete all as specified and directed.
S&F for fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically, complete all as specified and directed.
S&F for modular switch 6 Amps, one way, one module, complete all as specified and directed.
S&F for modular switch 16 Amps, one way, one module, complete all as specified and directed.
S&F for modular socket outlet combination 2/3 pin, 6 Amp , 230 volts, 2 module complete all as specified and directed.
S&F for modular socket outlet combination 6 pin, 6/16 Amp , 230 volts, 2 module complete all as specified and directed.
S&F for modular stepped type fan regulator electronic, 100 watt, 2 module, complete all as specified and directed.
S&F for ceiling rose 3 phase/PVC/polycarbonate isolated body surface bakelite 2 to 3 terminals, complete all as specified and directed.
Taking down ceiling fan of size 1200/1400 mm sweep and dismantling blades and removing fan and blades to store and painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust and refixing fans in same position including connecting to electric system and testing complete all as specified and directed.
S&F in repair for LED street light fitting 35 watts, 240volts, AC, outdoor type with high pressure diecast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including three core 0.5 sqmm copper cable from connector to fitting, complete as in repeir all as specified and directed
S&F in repair for LED street light fitting 25 watts, 240volts, AC, outdoor type with high pressure diecast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including three core 0.5 sqmm copper cable from connector to fitting, complete as in repeir all as specified and directed
S&F for lamp holder insulated body PVC/ Polycarbonate type with back plate suitable for batten/angular/pendent fittings, complete all as specified and directed.
S&F in replacement for LED lamp 9/12watt inverter bulb B22 CDL, 240 volts complete all as specified and directed.
S&F in repairs recess mounting 6500k light fittings LED 36 watts 2x2 panel surface/ recess mounting light fitting LED backlit with high efficient LEDs & glare free opal diffuser IP-20, internally prewired, 230V, complete with all accessories such as electronic driver, connector block etc and neccessary fixing arrangement at any height, complete all as specified and directed. Note: Material required such as safety harness, ladder and T&P etc will be provided by the contractor without any extra cost.
M&L in repair for LED Tube light fitting, complete with 1x 20 watts, 220V, AC decorative box type with driver, holder in and including LED tube light connection complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and connector block etc and necessary fixing arrangement at any height, complete all as specified and directed.
S&F in repair for environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head 13.5 watt 6000 K inbuilt LED luminaire comprising of high brightness LEDs, IP54 protection including connecting electrically using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete all as specified and directed.
S&F in replacement for MCB distribution board SPN 8 way, double door 240 volts duly painted with epoxy based powder coated painting suitable for mounting MCB DP/SPN as incomer and MCB SP/DP as outgoings complete with 200 amp rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gland plate with IP 42 protection complete all as specified and directed. (Note:- MCBs will be measured separately.)
S&F in replacement for MCB distribution board SPN 4 way, double door 240 volts duly painted with epoxy based powder coated painting suitable for mounting MCB DP/SPN as incomer and MCB SP/DP as outgoings complete with 200 amp rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gland plate with IP 42 protection complete all as specified and directed. (Note:- MCBs will be measured separately.)
S&F in replacement for MCB distribution board SPN 2 way, double door 240 volts duly painted with epoxy based powder coated painting suitable for mounting MCB DP/SPN as incomer and MCB SP/DP as outgoings complete with 200 amp rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gland plate with IP 42 protection complete all as specified and directed. (Note:- MCBs will be measured separately.)
M&L in repair for MCB single pole 6 to 32 amp, 240 volts, 'C' series/curve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
M&L in repair for MCB single pole & neutral 40 amp, 240 volts, 'C' series/curve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
Supply,laying, jointng, connecting, testing and commissioning, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 16 sqmm 2 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands , complete after taking down old unserviceable cable all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushoining, concrete cable cover and protection GI pipe shall be measured and paid separetly and length of calbe shall be one length unless otherwise as directed by GE).
Supply, Laying, connecting and testing of service cable of size 10 Sqmm 2 core 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with an inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire or drawn in and including medium grade non metallic rigid PVC conduit as per site requirement, flat or circular after taking down old unserviceable cable including others accessories, complete all as specified and directed.
M&L in repair for 40mm dia galvanized steel tubing (medium grade) with complete all fittings such as elbow, unions, nipples, tees, bends, short pieces, connections, check-nuts, caps, plugs, diminishing pieces and flanges etc as in pole, crossing of roads, laid in trenches, fixed on walls with clamps nut, bolts and washer etc for protection of cables, complete all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & RCC cover all as specified & shown in elect plate No. 3 of SSR part I of 2010 including testing on completion including taking down existing unserviceable earthing complete all as specified. (Note:-Earth strip and protection pipe upto board is included in the quoted rate)
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth not exceeding 10sqm on plan for laying of cable and foundation of poles stays and getting out in soft / loose soil complete all as specified and directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm (soil) thickness all as specified and directed.
Removing of excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
M&L for dry sand cushioning to underground cable, provided with a layer 8 cm thick before and 15 cm deep after laying and stretching jointing and testing the cable, complete all as specified and as directed (Note: Punned thickness of sand shall be measured and paid).
M&L in replacement for brick covering with width equal to length of brick as mechanical protection to cable using sub class ‘B’ bricks laid flat, size 230mmx115mmx75mm over the cable abutting each other, complete all as specified and as directed.
M/S RAHUL GUPTA (BID ID -3078505)
SATVIR GUPTA ENGINEER and CONTRACTOR (BID ID -3082200)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .