Maintenance works for Toilet, Laying of CC Pavement, Providing Pre-cast RCC Centre Median at Vellore New Bus Stand in Zone-IV in Vellore Corporation

Plain Cement Concrete 1:4:8 (One part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Plain Cement Concrete 1:1.5:3 (One part of Cement, one and half part of Crushed Sand (M- Sand), three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification (Upto Basement)

Paving the floor with kotta stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Brickwork in CM 1:5 (One cement & Five Crushed Stone Sand (M - Sand) using II class ground moulded bricks of size 9 " x 43/8 " x 23/4" including mixing the mortar, constructing,finishing, curing etc., complete complying with standard specification

Upto Basement

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification.

Supplying and fixing in position best approved of BIS quality PVC Waste water pipes having a pressure of 6 kg. / sq.cm including cost of special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 6.0 meter pipe length, etc., complete complying with standard specification.

160 mm dia pipe

110 mm dia pipe

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

25 mm Dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements

Coupler

25 mm Dia (M-0882 - PWD SoR 25-26)

Elbow

25 mm Dia (M-0888 - PWD SoR 25-26)

25 mm Dia (M-0894 - PWD SoR 25-26)

25 mm Dia (M-0900 - PWD SoR 25-26)

End Cap

25 mm Dia (M-0906 - PWD SoR 25-26)

Reducer

20 mm x 15 mm (M-0910 - PWD SoR 25-26)

25 mm x 20 mm (M-0911 - PWD SoR 25-26)

Reducer Tee

20 mm x 15 mm (M-0915 - PWD SoR 25-26)

25 mm x 20 mm (M-0916 - PWD SoR 25-26)

Reducer Elbow

20 mm x 15 mm (M-0920 - PWD SoR 25-26)

25 mm x 20 mm (M-0921 - PWD SoR 25-26)

PVC Screw Down Tap Heavy Type

20 mm Dia (M-0510 - PWD SoR 25-26)

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works)

PVC Elbow

110 mm dia

90 mm dia

PVC Elbow with Door

110 mm dia

PVC Tee

90 mm dia

PVC Tee with Single Door

110 mm dia

Supply and fixing of PVC. Nahini / Floor Trap with stainless Steel Gratings - 100 mm x 75 mm including all charges etc, complete as per standard specification

Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements. 25 mm dia

Supplying and fixing in position GI union and flanges of heavy type of approved quality and good variety, of various sizes including necessary cutting threading of GI pipes for jointing the union and providing two coats of paint with good variety and approved quality of synthetic enamel paints over a coat of priming coat in case of pipe line above ground level and coat of tar in case of line below G.L for both internal and external water supply arrangements. 25 mm dia

Supplying and fixing in position C.I.Manhole covers (light or heavy duty) of 60 X 60cm in size in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), of best approved quality and as per standard specifications etc.,complete.

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 50 mm thick in RCC M20 concrete using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Providing Pre-cast RCC centre median of size 0.610m at bottom 0.250m at middle 0.150m at top and to height 1.125m from the road level including cost and conveynace of all materials to work site including picking the existing B.T surface if necessary , and providing form work for shuttering ,on both sides and chamfered edjes at top including cost of steel reinforcement as per the bar bending shedule appended here with , fabrication and placing in position of steel grills including cost of binding wire , laying of RCC M-25 concrete using ISS HBG graded metal including cost and conveyance of all materials to work site from the approved source including labour charges for mixing , laying , curing etc., and cost and laying of 110mm dia PVC pipes (for service utilities ) at the middle of the median as directed by the departmental officers rendering , smoothess over the CC surface with 10kg of cement for 10sqm area and painting two coats over the CC surfaces with best approved quality of cement paint including primer etc., including all labour charges hire and fuel charges for the tools and plants employeed and as per standard specification and in accordance with drawings appended here with and as directed by the departmental officers etc., complete FOR RCC CENTRE MEDIAN as per MORT&H Rev V Specifications

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supply and fixing of 30 W LED street light fitting with bulb including all material charges such as clamps, wires etc., with all labour charges etc., complete as per standard specification