SPECIAL REPAIR TO BOUNDERY WALL WITH GRIT PLASTERING ON BOTH SIDE OUTER SURFACE OF MH, JRC AND SPECIAL REPAIR TO BLDG NO P-12F AND P-12F1 AT 60 THE MALL ROAD UNDER AGE B/R-I OF GE (EAST) JALANDHAR CANTT

Amount

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete all as directed.

M&L 100 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggt) as in sub base finishing the surface even and rough to receive floor finishes complete all as specified and as directed.

M&L for 25 mm thick Sand cushion under floors complete all as specified and as directed.

M&L for 60mm thick M-35 grade Machine pressed precast concrete interlocking paver block any shape and size with grey cement pigment, confirming to IS 15658-2006 complete all as specified and as directed.

M&L 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone agg as in sub base finishing the surface even and rough to receive floor finishes complete all as specified and as directed.

M&L for coloured cement concrete chequered tiles 20cmx20cmx25 mm thick with grey cement and pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors incl screed bed 15mm thick in CM 1:6 complete all as specified and as directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone agg) as in coping ,edging & other similar work including necessary form work complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins of Fe 410 W (gde- E-250) quality A where connected to common rafters and and connecting platesguides for sliding doors; fixed with angle cleats or otherrunning rails

M&L for Prepration of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for Excavating in post holes(or similar holes) each n exc 0.5 Cum getting out in layers not exceeding 25 cm , watering, and removing surplus soil to a distance n exc 50m and making good surface complete

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundations filling and mass concrete etc complete

Dismantling of Asbestos cement (corrugated , semicorrugated , etc.) sheets as in roof coverings complete all as directed.

S& F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Make:- TATA (Blue Scope)/ JSW

M&L for Cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in roof padding, laid to slopes, surface finished even and smooth without using extra cement average thickness of concrete 50mm complete all as specified and as directed.

M&L for 15mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including cleaning the roof top by water etc all as specified and as directed.

Supply and applying high built elastomeric waterproofing coating based on pure hydrophobic polyurethane cold applied of spray/brush applied, membrane with an elongation of 280% and tensile strength of 2.7 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes cleaning of surface and made free from dust for final base preparation, epoxy primer 1: (resin: harder) application with 100% water dilution and pure polyurethane application in 2 coats with a tortal min consumption of 1.25 kg per Sqm. Application should be done with Graco sprauer by a company authorised applicator

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing ) removing rubbish outside MD land complete all as directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed..

M&L for Non skid ceramic coloured tiles (premium quality) 7 to 8 mm thick area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm on vertical surface such as skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed plaster 10 mm thick in CM (1:4) complete all as specified and as directed.

M&L for non skid tiles (premium quality) coloured 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as per the existing tiles and size as suitable/ matching with the existing tiles in dados/ floors set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile,including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 450x300x 6 to 7 mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and as directed.

S&F bib taps, cast copper alloy, fancy type chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and as directed.

S&F stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, all as specified and as directed .

S&F angle cock/stop valves 15 mm nominal bore, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, fancy type,chromium plated, complete all as specified and as directed .

S&F 125 mm size Brass chromium plated shower roses with swivel joints, including fixing to steel pipe or union complete, fixed in repair,all as specified and as directed.

S&F pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and as directed.

S&F brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified.

S&F tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified.

S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and as directed.

S&F for 32 mm bore size waste coupling for WHB etc with PVC cap complete fixed in repairs all as specified.

S&F of any dia PVC waste pipe for WHB, complete all as specified.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified.

S&F galvanised steel water tubes 'medium grade' (ISI marked), 15 mm bore, with and including all GI fittings . fixed to walls, ceiling or laid in floors, complete all as specified and as directed

S&F 1000 ltr rotational moulded polythene water storage tank white triple layer, antimicrobial cylindrical vertical with closed top hoisted in position complete including dismantling of existing tank of any description, complete all as specified and as directed.

S&F 20 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete, fixed in repairs, all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern ),including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store.

S & F 110 mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors/trenches with & including existing/new MS stack clamps of FI 50X3mm, complete all as specified and as directed

S & F 75 mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors/trenches with & including existing/new MS stack clamps of FI 50X3mm, complete all as specified and as directed

S & F 110 mm PVC (SWR) branch pieces (Tee) with cement joint complete all as specified and as directed

S & F 75 mm PVC (SWR) branch pieces (Tee) with cement joint complete all as specified and as directed

S & F 110mm bore PVC(SWR) bend/shoe of any radius, with cement joint complete all as specified and as directed.

S & F 75mm bore PVC(SWR) bend/shoe of any radius, with cement joint complete all as specified and as directed.

Taking down cement plaster on brick walls etc including Rcking out joints hacking to key scrubbing down with water etc , complete all as specified and as directed by Engr-in-Charge

M&L 15mm thick rendering on concrete/brick surfaces in CM 1:4 (externally) finished even and fair without using extra cement including water proofing compound complete all as specified and as directed (Water proofing compound should be paid seperately), complete all as specified and as directed.

"Supply only" of integral water proofing compound (ISI marked).

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint , complete all as specified and as directed.

M&L rendering 15 mm thick in CM 1:6 on concrete surfaces finished surface even and smooth without using extra cement complete all as specified and as directed.

M&L for prepration of newly plastered surfaces of walls including cornices pilasters etc and applying two coat of oil Emulsion Distemper (OBD) over a coat of priming surface complete all as specified and as directed.

M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces finished surface even and smooth without using extra cement as in ceiling surfaces complete all as specified and as directed.

M&L for preparation of newly plastered surface of ceiling including cornices pilasters etc.and applying three coat of white wash on ceiling complete all as specified and as directed.

Taking down chowkhats or frame with shutter without taking off shutter from the frame area exc 1.5 Sqm but n exc 4.0 sqm each and removal to store complete all as specified

Taking down shutters of exc 1.00 sqm but n. exc 2.00 sqm each, complete all as specified and as directed.

S&F 35mm thick IInd class hard wood plain framed factory made paneled shutters with panel of 9 mm BWP commercial veneering on both veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (part-I) kiln seasoned and chemically treated complete all as specified.

S&F 35mm thick 2nd class hard wood glazed or Skelton shutter factory made open rebated prepared to receive glass, gauge etc without sash bars edges of framing plain fitted with cut and mitered beads for securing glass etc size of member all as per clause 8.23 (a) of SSR Part-I.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F 100mm size MS butt hinges medium weight cold rolled (zinc cromate)., complete all as specified and as directed.

S&F MS pressed handles, oval type, stove enameled black 150mm size complete all as specified and as directed.

M&L mild steel sliding door bolts 300mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F MS barrel tower bolt 200mm long stove enameled black with bright bolt and fixed complete all as specified and as directed.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply & fixed floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 140mm complete all as specified

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm thick cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm thick cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings with waterproofing compund.complete all as specified

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

Preparation of old steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint with red oxide zinc chrome primer complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (Gde-E-250) complete all as specified and as directed.

SATISH AND CO (BID ID -3514848)

KMTR MONCHER COLLECTION PRIVATE LIMITED (BID ID -3515014)

M/s GURFATEH BUILDERS (BID ID -3509445)

KAMAL AGGARWAL (BID ID -3506796)

G S TRADERS (BID ID -3514997)

SANMATI UDYOG (BID ID -3514649)

S S CONSTRUCTION (BID ID -3509352)

M/s SUDHIR KUMAR (BID ID -3509383)