Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance GRAM AEMANPUR DISTRICT BULANDSHAHR UTTAR PRADESH | BULANDSHAHR | BULANDSHAHR | UTTAR PRADESH | Admitted-Finance |
| 5 | Rejected-Technical | Rejected-Technical All Pre qualifying conditions not fulfilled. |
Tender Value
₹97.0 L
EMD Value
₹97,000
Closing Date
17 Oct 2022, 1:00 pmClosed
S.E. EUCC-V, LESA, LKO
Office of S.E., EUCC-V, Room no. 61, LESA Bhawan, LKO
CONSTRUCTION OF 33 KV LINE FROM 132/33 KV SUBSTATION AWAS VIKAS TO 33/11 KV SUBSTATION RAJANI KHAND FOR PROVIDING INDEPENDENT 33 KV SOURCE TO THIS SUBSTATION.
2022_MVVNL_735282_1
17/EUCC-V/LESA/2022-23
Open Tender
Electrical Works
Fixed-rate
180 days
From 132/33 kv SS awas vikas to 33/11 kv Rajnikhan
As per tender Document
2 documents required · 2 mandatory
₹3,540
A/c. No. 10101985364, IFSC CODE SBIN0003347, SBI
₹97,000
22 Oct 2022
7 Oct 2022
17 Oct 2022
7 Oct 2022
17 Oct 2022
7 Oct 2022
Amount
Safe Dragging, loading, carriage and unloading of following store materials with proper stacking from ESC Daliganj to JE dump store and JE dump store to work site within municipal areas.
33 KV 3x300sqmm XLPE Cable
33 KV Jointing Kit 3x300 sq mm Cable Outdoor
33 KV Jointing Kit 3x300sq mm Straight Through
33 KV Line Isolator
33KV Current Transformer 400/200/1
STP 11 M long
33 KV Pin insulator
33 KV pin with nut
Top/MS channel 100X50 MM 10 kg / mtr
MS angle 65x65x6MM 5.8 kg / mtr
MS Channel 125x65mm @13.1 Kg. Mtr.
MS Angle 75x75x6 mm @6.8 Kg./mtr.
M S Earthing Rod 20x2500 mm
LT XLPE Cable AL.1X400 Sq.mm.
Digging of pit in Kachcha/Pakka land in depth upto 1/6 length of pole, Dragging of STP from nearby place/dump, Erection of single pole along with stone pad in bottom with proper alignment on 11 mtr long ST pole and refilling with ramming of earth
Grouting of pole in depth of 01 mtr. Below ground level in ratio 1:4:8 in cement, sand and brick ballast as per RESPO norms.
Construction of pole plinth 300mm x 450 mm above ground level in ratio 1:2:4 in cement, coarse sand and stone gritt as per RESPO norms.
Painting of new erected ST pole with two coat of Red oxide paint, PO red paint at top of pole 2 mtr and balance by two coats of best quality aluminium paint ISI mark as per norms.
Laying of D/C 33 KV 3x300 Sqmm XLPE cable in parallel in normal soil by digging of trench 1050 mm deep & 750 mm wide its boxing with bricks laying of cable & seperation of cable by brick wall, filling of sand upto top and covering with stone slab after laying of cable (All material will be provided by contractor except 33 KV cable)
Laying of S/C 33 KV 3x300 Sqmm XLPE cable in normal soil by digging of trench 1050 mm deep & 500 mm wide its boxing with bricks, laying of cable, filling of sand upto top and covering with stone slab after laying of cable (All material will be provided by contractor except 33 KV cable)
Laying of 33 KV XLPE cable 3x300 sq mm S/C in MS- Pipe 150 mm dia by digging of trench in Kachcha/Pakka of suitable size at road crossing (All material will be provided by contractor except 33 KV cable)
Laying of single 33 KV 3x300 Sqmm XLPE Cable by drill method
Laying of single 33 KV 3x300 Sqmm XLPE Cable by drill method in HDPE Pipe 150 mm dia (All material will be provided by contractor except 33 KV cable).
Laying of single 33 KV 3x300 Sqmm XLPE Cable by drill method in MS Pipe 150 mm dia (All material will be provided by contractor except 33 KV cable).
Cable Laying in already constructed trench/existing pipe S/C
Fabrication & erection of 33 KV Exposure type double pole with the provision of bus bar on 11 mtr. long ST-Pole with fixing of necessary clamps & other accesories like 02 No. Channel 100x50mm (1600 mm each) , 02 No. Bracing angle 65x65x6 mm (2800 mm each) for supporting the hoisting of cable on pole, 09 No. Pin insulator with pin, Danger board, number plates and Barbed wire etc. Its jumpering by single core PVC Al. Cable with proper size of lug (All required materials will be provided by contractor except ST- pole, steel parts, Pin insulator with pin and PVC Al. cable)
Hoisting of 33 KV 3x300 Sqmm XLPE cable on D/P through GI- pipe of size 6" dia 3 mtr long including its jumpering complete with holding clamps, PG clamps, Nut & bolts (All material will be provided by contractor)
Making of Heat & shrinkables joints of following sizes and types in 33 KV XLPE cable(Jointing kit will be provided by deptt.)
Outdoor end termination kit for 33 KV 3x300 sqmm XLPE cable
Straight through jointing kit for 33 KV 3x300 sqmm
Digging of pit of size 3x2x1.2 mtr for making straight through joint of 33 KV cable size 3x300 Sqmm work included boxing of pit by sand, brick and stone slab filling of soil levelling and ramming of the same. (S/th provided by the deptt.)
Earthing of poles with MS- Earthing rod 20x2500 mm, earth wire with nut and bolts as per norms (All material will be provided by contractor except MS-Earthing rods).
High Pressure Testing of 33 KV cable. Testing equipment will be arranged by contractor.
Fabrication & Erection of cable stand made of two nos MS channel 100x50x3 mtr. Long jointed to each other by means of 05 nos MS strip 50x6 mm of size 150 mm Long each by welding at equal distance interval as per norms and grouting in block of 300x300x700 completely providing two nos cable clamp also.(All materials will provide by contractor except MS channel).
Isolator Structure-Fabrication of Isolator structure minimum 3.5 mtr overall height and 2.5 mtr above ground level as per RESSPO drawing, with help of M.S channel 125x65 mm two pieces of M.S channel joined to each other by M.S flat 50x6 mm, diagonally at the interval of 0.5 mtr and top & bottom of the structure. Grouting of Isolator structure in CC (cement ,coarse sand and stone grit of 20 mm gauge) including supply of necessary T&P and painting of structure complete.(only M.S channel and angle provided by the deptt)
Painting of all structures equipment (new and existing).
Mounting of accessories/equipment on fabricated structure complete work with making proper alignment and tightening the work including fabrication work if required for proper operation of equipment
33 KV Current Transformer 400/200/1 A
Bus/Line Isolator
Jumpering of complete line bay with ACSR panther Cond. with required clamp, nut & Bolts from Existing 33 KV bus bar & 33 KV cable complete work.(required PG clamps will be provided by contractor).
Laying of single circuit 33 KV 3x300 sq mm XLPE cable in normal soil in switch yard as per norms. Cable trench should filled by fine sand.
Hoisting, jumpering, clamping of 33 KV 3x300 sq mm XLPE cable on cable stand/structure with proper jumpering with help of PG clamps (required PG clamps will be provided by contractor).
Pipe boring type earthing minimum 20 mtr deep from ground level or upto water level with B class G.I. pipe 2 " dia. Connection of equipment with earthing included in the job as per specification/norms for CT/LA and other.(All materials will be Provided by contractor)
Supply and fixing of cable route marker of 33 KV Line
Safe Dragging, loading, carriage and unloading of balanced materials with proper stacking from site to JE dump store/Lesa store after completion of work.
AARADHYA AND ADHYATM ASSOCIATES
Sidhi Enterprises
Saraswati Electricals & Contractors
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .