ADDN ALTN TO GOVT BLDG P-236 AT AJAY BAUGH AND SPL REP TO STREET LIGHT/SECURITY LIGHT FITTINGS AT BV YARD UNDER GE MINNIE BAY PORT BLAIR

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises etc complete all as specified and directed by Engineer-in-Charge.

M&L for Vitrified ceramic tiles (dark shade) 10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed by Engineer-in-Charge.

M&L for Vitrified ceramic tiles (dark shade) 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed by Engineer-in-Charge.

M&L for Vitrified ceramic tiles (dark shade) 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in skirting, steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering CM 1:4 on brick work or concrete sufaces for receving tiles complete all as specified and directed by Engineer-in-Charge.

M&L for Coloured Non-skid Ceramic tiles 7 to 8 mm thick exc. 0.06 sqm but n.exc 0.11sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed by Engineer-in-Charge.

M&L for Glazed Ceramic tiles 450x300x 8-10 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over and 10mm thick backing in cement mortar (1:3) complete all as specified and directed by Engineer-in-Charge.

M&L Granite (of any type) 16 to 20 mm thick machine cut fixed on slab,window cill etc , bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting, moulding & polishing over and including 20 mm thick screed in CM (1:4) complete all as specified and directed by Engineer-in-Charge.

M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed by Engr in Charge.

M & L for Vitrified Chequered cement concrete tiles 30cm x 30cm x 8/10 mm thick, set, jointed and pointed in near cement slurry in floors/skirtings with grey cement and pigments and including screed bed 15mm thick CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Demolition of precast concrete block walling built in Cement Mortar including all quoins arches pillars etc complete all as specified and directed by Engineer-in-Charge.

M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and directed by Engineer-in-Charge.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M & L for rendering to concrete or block masonry surfaces or surfaces other than fair faces of brick surfaces, 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M & L rendering 5mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and fair complete all as specified and directed by Engineer-in-Charge. Note: Water proofing compound will be measured and paid separately.

M & L rendering 5mm thick in CM (1:3) on ceiling (external) surfaces finished even & smooth without using extra cement including mixing of water proofing compound complete all as specified and directed by Engineer-in-Charge. Note: Water proofing compound will be measured and paid separately.

Supply only Integral water proofing compound.

M & L Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed by Engineer-in-Charge.

M&L preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed by Engineer-in-Charge.

M&L preparing newly plastered surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparing old plastered surfaces of wall and applying two coats of texture painting over a coat of primer of suitable colour and pattern complete all as specified and directed by Engineer-in-Charge.

M & L for complete removal of existing treatment on wall & finishing the surface & appliying two coat of oil bound distemper along with primer complete all as specified and directed by Engineer-in-Charge.

M & L for complete removal of existing treatment on ceiling and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of old existing treatment/finishes on bldg .P-236 providing necessary scaffolding & safety precautions and cleaning the surfaces free from any loose paint, dust,greases,growth of fungus,algae or moss using wire brush and levelling the surface even and smooth using mechanical sander and finally applying water by pressure jet washer of max pressure of 170 bar with automatic pressure relief system. The following process shall be initiated only after the above surface preparations :-

(a) Filling the surface cracks using crack seal compound on required consistency using electric mixer. (b) Filling the dents and holes using wall care putty in appropriate ratio using electric mixer. (c) Applying one or two coats of damp proof primer (primer coat) using Airless spray technology with max working pressure of 22.8 Mpa/3300 psi and capable of operating single spray gun with a max material hose length of 30m. (d) Applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm Anti algal weather coat 100% acrylic smooth emulsion paint using Airless spray technology with max working pressure of 22.8 Mpa/3300 psi and capable of operating single spray gun with a max material hose length of 30m.

Note: (1) Work shall be executed only through authorised applicator duly approved by Manufacturer of Paint and certificate in this connection shall be submitted by the Contractor. (ii) The affected area of the wall due to dampness shall be ascertained by moisture meter of power input 9v Display 60 LEDs using colour code scale and Moisture measurement of each location shall be submitted along with RAR. (iii) The contractor shall upload MOU letter with any one of Paint manufacturer within 28 days of receipt of acceptance copy failing which contract shall be liable for cancellation. Authorised applicator shall have valid authorisation letter from the manufacturer The authorisation letter needs to be valid for the complete period of execution of the painting work. (iv) After preparation of the surface, Engr-in-Charge shall inspect and approve the same before applying primer and finishing coats. (v) Building wise stage passing register shall be maintained & submitted alongwith RAR/FB duly signed by Engr-in-Charge and contractor.

(vi) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. The specification and details of the equipments and tools pertaining to this item is denoted on Particular Specification.Manual method of paint application is not allowed and also Penalty shall be levied if appropriate tools & equipments pertaining to smart periodicals not used. (viii) Proper masking arrangement shall be carried before the application of primer or paint. (ix) The other coat of Primer and Paint shall be applied only after the completion of drying time and comply with recoating period as per manufacturer instructions. (x) Cost of scaffolding shall be included in the quoted rate.

M&L for applying one or two coats of damp proof primer (primer coat) using Airless spray technology with max working pressure of 22.8 Mpa/3300 psi and capable of operating single spray gun with a max material hose length of 30m and Applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm Anti algal weather coat 100% acrylic smooth emulsion paint using Airless spray technology with max working pressure of 22.8 Mpa/3300 psi and capable of operating single spray gun with a max material hose length of 30m on newly plastered surfaces

Note: (1) Work shall be executed only through authorised applicator duly approved by Manufacturer of Paint and certificate in this connection shall be submitted by the Contractor. (ii) The affected area of the wall due to dampness shall be ascertained by moisture meter of power input 9v Display 60 LEDs using colour code scale and Moisture measurement of each location shall be submitted along with RAR. (iii) The contractor shall upload MOU letter with any one of Paint manufacturer within 28 days of receipt of acceptance copy failing which contract shall be liable for cancellation. Authorised applicator shall have valid authorisation letter from the manufacturer The authorisation letter needs to be valid for the complete period of execution of the painting work. (iv) After preparation of the surface, Engr-in-Charge shall inspect and approve the same before applying primer and finishing coats. (v) Building wise stage passing register shall be maintained & submitted alongwith RAR/FB duly signed by Engr-in-Charge and contractor.

(vi) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. The specification and details of the equipments and tools pertaining to this item is denoted on Particular Specification.Manual method of paint application is not allowed and also Penalty shall be levied if appropriate tools & equipments pertaining to smart periodicals not used. (viii) Proper masking arrangement shall be carried before the application of primer or paint. (ix) The other coat of Primer and Paint shall be applied only after the completion of drying time and comply with recoating period as per manufacturer instructions. (x) Cost of scaffolding shall be included in the quoted rate.

Taking up or down 20 mm bore tubing and connections and removing off the site complete all as specified and directed by Engineer-in-Charge.

Taking up or down 25 mm bore tubing and connections and removing off the site complete all as specified and directed by Engineer-in-Charge.

Supply and laying of CPVC pipes 20 mm dia outer boreSDR 11 &plain CPVC SDR 11with all special fittings on walls /ceilings or laying in floors complete all as specified and directed by Engineer-in-Charge.

Supply and laying of CPVC pipes 25mm dia outer boreSDR 11 &plain CPVC SDR 11 with all special fittings on walls /ceilings or laying in floors complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 20 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 25 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 20 mm outer dia CPVC pipes brass Elbow complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 20mm outer dia CPVC pipes brass Elbow (3/4 X1/2) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 16 mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 20mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 25 mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 16 mm outer dia Brass Tee complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 20 mm outer dia Brass Tee complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 25 mm outer dia tank Adaptor complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 20mm outer dia union complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 25 mm outer dia union complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.

M&L for Reinforced Cement Concrete Design mix M-30 as in Chajjas complete all as specified and directed by Engr-in-Charge.

M&L for formwork to sides of chajjas ,canopy,overhang,chullah hoods ,any projected parts of building and similar items including edges etc complete all as specified and directed by Engineer-in-Charge.

M & L for Reinforced Cement Concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in slab , beams or columns in floors, roofs, landings, deck slab, shelves and like complete all as specified and directed by Engineer-in-Charge.

Use and waste of formwork with fair finished surface to soffits of suspended slabs such as roof slabs, floor slabs, landings and simillar work horizontal or sloping etc complete all as specified and directed by Engineer-in-Charge.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required incl cranking and hooking ends and binding with MS wire (annealed) of dia not less than 0.90mm complete all as specified and directed by Engineer-in-Charge.

M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required incl cranking and hooking ends and binding with MS wire (annealed) of dia not less than 0.90mm complete all as specified and directed by Engineer-in-Charge.

Dismantiling of water tank capacity exc 500 & n exc 1000 ltr complete all as specified and directed by Engineer-in-Charge.

M & L for 100 mm thick, Plain Cement Concrete 1:2:4, Type B1, using 20mm graded aggregate as in base for water tanks etc complete all as specified and directed by Engineer-in-Charge.

S&F Rotational moulded polyethylene water storage tanks capacity 1000 liter ISI marked double layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge.

S&F 25 mm CPVC ball valves fiitings to CPVC pipe complete all as specified and directed by Engineer-in-Charge.

S&F Ball brass valve high pressure of polyethylene float and fly nut complete screwed for iron pipe and fixed, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule etc and fixed of 25mm bore complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as manufacturers instruction complete all as specified and directed by Engineer-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing complete all as specified and directed by Engineer-in-Charge.

S&F mild steel work in tubular roof trusses,trussed, purlins, rafters including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S 1161 1979 grade st 240 complete all as specified and directed by Engineer-in-Charge.

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A complete all as specified and directed by Engineer-in-Charge.

S & F Mild steel screw bolts (machine made) of any dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc. 10 cm long complete all as specified and directed by Engineer-in-Charge.

S & F Aluminium flat iron work in, wind ties screwed as directed, including all necessary drilling, bolting or riveting etc and similar work complete all as specified and as directed by Engr-in-Charge

M & L for providing Plain cement concrete type B1 (1:2:4) using 20 mm graded aggregate as in copings,apex stones,bed plates etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

M&L cutting holes into or through reinforced cement concrete slabs, chajjas etc reinforced or otherwise exc 500 sqcm but not exc. 0.1 sqm complete all as specified and as directed.

S&F Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old steel surfaces exc. 10cm width and girth and applying one coat of synthetic enamel paint,complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters & grill (if fixed) without taking off shutters from the frame complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames exc 1.5 Sqm and not exceeding 4 Sqm (with shutters and grill (if fixed) without taking off shutters from the frame complete all as specified and directed by Engineer-in-Charge.

S & F Solid PVC Door frame of size 50mm x 47mm made out of 5mm rudraksh colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick with single side prelam PVC sheet used instead of plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10 mm 90 degree bent edge consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stilesand plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

S & F Aluminium anodised (minimum anodisation is 50 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc including fixing of glass, wire mesh, particle boards etc complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge. Note - (i) Weight of necessary Aluminium alloy handles and locking arrangements shall be considered for measurement and payment under this unit rate. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. (ii) Glass panels, prelaminated particle boards, glass & aluminium wire cloth as applicable shall be measured and paid separately as suppy only under relevent item of this schedule

S&F Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engr-in-Charge

Fixing only in repairs anodised aluminium window and ventilator shutters, side hung type with or without sash bars, aluminium sections weighing 0.55 kg/m and thickness of section not less than 1.6 mm including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed by Engineer-in-Charge.

Supply only 4 mm Plain sheet glass ordinary quality ,in square exc 0.5 sqm each complete all as specified and directed by Engineer-in-Charge.

Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including taking down complete all as specified and directed by Engineer-in-Charge.

Supply only figured glass 4mm,pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S & F Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 250 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by Engr-in-Charge.

S & F Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by Engr-in-Charge.

S&F aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and directed by Engineer-in-Charge.

S&F extruded aluminium alloy handle fabricated type anodised 100mm long complete all as specified and directed by Engineer-in-Charge.

S&F extruded aluminium alloy handle fabricated type anodised 150mm long complete all as specified and directed by Engineer-in-Charge.

S & F 100mm length Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 including screws complete all as specified and directed by Engineer-in-Charge.

S & F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor complete all as specified and directed by Engineer-in-Charge.

S&F door closer hydraulically regulated designation No. 3 universal type, aluminium (die cast) body suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 81 kg and fixed all as specified and as directed.

S&F double action floor spring hydraulically regulated made upof minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, government piovt made of brass,other parts made of mild steel heavy duty and fixed all as specified and as directed.

S & F in repair 18 to 20mm thick prelaminated HDF panels of interior grade type-II of approved shade for kitchen cabin/wardrobe/wall panelling fixing with necessary fitting like keku fitting,spring clip,hanger plate,modular hinge/clip,push fix or stud fitting as per manufacturers instructions complete including removal of old cup board/ kitchen shelves/racks any type complete all as specified and directed by Engineer-in-Charge.

M&L for second class hard-wood clean sawn in scantlings framed and fixed complete all as specified and directed by Engineer-in-Charge.

S&F 10 mm toughned glass door shutter including necessary cutting to required shape,drilling holes as required including all necessary fittings like hinges,locks,floor locks,pasting with decorative film complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 18 mm Medium density fibre board, exterior grade, fixed to timber framework with screws complete all as specified and directed by Engineer-in-Charge.

S&F 30mm width continuous (piano) hinges mild steel finish or electrogalvanised complete all as specified and directed by Engineer-in-Charge.

S&F 100mm long hasp and staples mild steel wire type stove enamelled black including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel auto closing heavy duty modular hinges of size 103 x 64mm for cupboard shutters complete all as specified and directed by Engineer-in-Charge.

S & F in repair fancy type curtain Rod decorative type , stainless steel,chromium plated 25 mm dia with stops, rollers including brackets etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair stainless steel sink with drainage board made out of 1.00 mm thick sheet with plug, washers, Ms angle cantilever brackets for suitable size and connecting union to pipe of overall size 1140 mm x 500 mm and bowl size 510mm x 400 mm x 190 mm complete all as specified and directed by Engineer-in-Charge.

S&F Vitreous china wash basins including brackets, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed by Engineer-in-Charge.

S & F 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.

S & F 40 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.

S & F 32 mm (Dia of discharge pipe) Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed by Engineer-in-Charge.

S & F 40 mm (Dia of discharge pipe) Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed by Engineer-in-Charge.

S & F in repair Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stop valves cast copper alloy chromium plated with long shank and cup fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore,including necessary cutting and making good wall or floor tiling to match existing(tiles to be paid supplied only rates) etc complete all as specified and directed by Engineer-in-Charge.

S & F Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and directed by Engineer-in-Charge.

S & F Bib Taps, long boby with flange cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and directed by Engineer-in-Charge.

S&F in Stainless steel Towel ring square with round flange complete all as specified and directed by Engineer-in-Charge. Model No: Jaquar ACN-1121N

S&F brass chromium plated telescopic Hand shower(Health Faucet) (ABS Body) with 1 Meter long Easy Flex Tube in Chrome Finish& wall Hook complete all as specified and directed by Engineer-in-Charge.

S & F Soap Dish,brass chromium plated of approximate size 160 x 160 x 90 mm with screws complete all as specified and directed by Engineer-in-Charge.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long of approved quality complete all as specified and directed by Engineer-in-Charge.

S & F in repairs Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC flexible connection with PTMT nuts, of 15mm dia and 600mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flushtank ,Geyser etc, complete all as specified and directed by Engineer-in-Charge.

Demolition and breaking up drain pipes of size 75/100 mm dia (Salt glazed ware, AC or Reinforced concrete, PVC (SWR)) set in cement mortar complete all as specified and directed by Engineer-in-Charge.

Dismantling of cast iron or reinforced concrete / PVC (SWR) drain pipes of size 75/100 mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 75mm dia out let, PVC (SWR) Floor Trap with SS grating including jointing to waste pipe fixed with solvent cement complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in down pipes complete all as specified and directed by Engineer-in-Charge.

S & F 110 mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in down pipes complete all as specified and as directed by Engineer-in -charge.

S & F 110 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.

S & F 110 mm bore PVC [SWR] branch piece, single (single Y) equal or unequal with access door including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.

S & F 110 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.

M &L for Stack clamps for 100 mm dia bore pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) bends with access door 110mm dia complete all as specified and directed by Engineer-in-Charge.

S&F in repair 110mm bore PVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.

S & F in repairs Brass Chromium Plated Tubular Towel Rail, 20mm dia, D Type, 600 mm long between flanges complete all as specified and directed by Engineer-in-Charge.

M & L for 75 mm thick Plain Cement Concrete 1:3:6 type Nominal mix C-2 using 20 mm graded stone aggregate as in sub base, plinth protection etc complete all as specified and directed by Engineer-in-Charge.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed by Engineer-in-Charge.

Taking down unserviceable main switches ,DBs and making good disturbed surfaces of walls/ floors to match the existing surfaces complete all as specified and as directed by Engineer-in -charge.

Taking down unserviceable submain wiring alongwith batten/PVC/steel conduits etc and making good disturbed surfaces of walls/ floors to match the existing surfaces complete all as specified and directed by Engineer-in -charge.

Taking down old unserviceable point wiring complete including fittings complete all as specified and as directed by Engr-in-Charge

M & L point wiring with 1.5 Sq.mm (nominal area) PVC unsheathed multi strandard copper conductor FRLSH PVC insulated 1100 volt drawn through and including PVC conduit / PVC casing caping ISI marked, minimum 20mm size and its accessories complete along with 1.5 Sqmm PVC unsheathed multi stranded copper conductor FRSLH cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed / surface mounted as required and including 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting electrical switches, switch socket combinations,fan regulators etc., as required with 3 mm thick plastic laminated sheet top cover all as directed and specified for the following:- Note : Cost for cutting of chases for conduit required size of wiring shall be paid and measured separately.

One light point controlled by one 05 Amps switch

One fan point controlled by one 05 Amps switch

One 5/6 Amps 3 pin socket outlet on independent board controlled by one switch

One three pin socket outlet of 5/6 Amps on same board

One bell/buzzer point controlled by one push button independently

All as per item No 136 above but with 2.5 Sqmm single core multi standard FRLSH copper conductor for one three pin socket 15 amps on independent board including continuous earth wire 2.5 Sqmm FRLSH copper solid conductor to common earth dolly complete all as specified and as directed by Engr-in-Charge

M&L for Sub main wiring complete with 2x6.0 Sqmm , single core , multi stranded copper conductor FRLSH PVC insulated and sheathed cable 1100 Volts grade , drawn in PVC conduit in concealed/surface (as required) along walls roofs etc including 6.0 sqmm unsheathed FRLSH copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed by Engr-in-Charge Note:- (i) All three wire/cable Phase, Neutral and Earth) shall run through for every individual circuit from the DBs. (ii) Three run of cable and one run of conduit shall be measured and paid as one unit in this quoted item

S&F switches 6 Amps 240 volts flush type complete all as specified and as directed by Engr-in-Charge

S&F switch socket combination 2/3 pin 5/6 Amps 240 volts flush type complete all as specified and as directed by Engr-in-Charge

S&F socket outlet 3 pin 5/6 amps 240 volts flush type complete all as specified and as directed by Engr-in-Charge

S&F switch socket combination 3/5 pin 15/16 Amps 240 to 415 volts flush type complete all as specified and as directed by Engr-in-Charge

S&F bell push 5 amps flush type complete all as specified and as directed by Engr-in-Charge

S&F bell buzzer dingdong type AC 230Volts single pole complete all as specified and as directed by Engr-in-Charge

Supply and fix fan regulator stepped type, 120W - 1/2 module ,220V 50Hz complete all as specified and as directed by Engineer-in-charge.

S&F ceiling rose surface type Bakelite 65 x 50 mm with three terminals with ISI mark complete all as specified and as directed by Engr-in-Charge.

S & F lamp holder PVC insulated body with back plate complete all as specified and as directed by Engineer-in -charge.

S&F LED tube light fitting, 1x20 w, 230v .Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver.Flicker free, high efficiency and robust industrial batten family suitable for Surface, wall and conduit mounting & connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed by Engineer-in-Charge.

S & F in replacement LED mirror light fittings 1x10 W, 220 volts AC decorative type with deiver holder and led lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-charge.

Supply and fixing LED bulb 9 watt complete all as specified and as directed by Engineer-in-charge.

M&L for taking down of ceiling fan and replacing of minor spares such as capacitor,screws,canopy nuts and bolts,split pin, rubber reel and oiling, greasing, filling cavities with filler (Putty) after cleaning of dust etc and applying two coats of synthetic enamel paint over a coat of red oxide primer and writing the MES No with black paint complete all as specified and as directed

S&F DB SPN 8 way with category of protection double door type IP-43 factory made with tinned copper 100 Amps rated bus bar suitable for MCBs,all as specified and directed by Engr-in-Charge Note : Front cover of enclosure shall be flush with with surface

S&F MCB SPN 40 to 63 Amps,10KA 415 volts 50 Hz AC supply, breaking capacity 10 kA, 'C' series complete all as specified and as directed by Engr-in-Charge

S&F MCB single pole 6 to 32 Amps, 240 volts 50 Hz AC supply,breaking capacity 10kA, 'C' complete all as specified and as directed by Engr-in-Charge

Suppy and laying in trenches, fixed on walls, passing through pipes, jointing and testing of electric LT XLPE cables, PVC insulated, PVC sheathed, galvanised steel strip or wire armoured electric power cables with stranded aluminium conductors 1100 Volts grade including taking down of old unserviceable cable complete all as specified and as directed by Engineer-in-Charge for the following size :- Note:The rates should be includs in Cable lugs, Cable Gland and joint kit (if required).

(a) 4 Core 6 Sqmm

(b) 4 Core 10 Sqmm

(c) 4 Core 16 Sqmm

(d) 3.5 Core 25 Sqmm

Supply & Laying of Telerex DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 50 mm and inner dia 38 mm polythylene including coupler & Bend with smoooth inernal and profiled external surface for non pressue under ground cable complete all as specified and as directed by Engineer-in-Charge.

Supply & Laying of Telerex DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 63 mm and inner dia 50 mm polythylene including coupler & Bend with smoooth inernal and profiled external surface for non pressue under ground cable complete all as specified and as directed by Engineer-in-Charge .

S&F GI pipe of medium grade 40 mm dia all fitting fixture for fixing with wall and road crossing etc. complete all as specified and as directed by Engineer-in-Charge

Excavation in trenches any type of soft/loose soil not exc 1.5m wide and not exc 1.5m in depth for foundation, pipe, laying of cable etc not exc 10 sqm on plan and not exc 1.5m in depth and getting out complete all as specified and as directed by Engineer-in-Charge

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil all as specified and as directed by Engineer-in -charge.

Removing excavated materials (soil) to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 meter above the starting point all as specified and as directed by Engineer-in -charge.

M&L for road cutting, removing of material , returning filling and pcc 1:2:4 for laying of LT UG cable /Galvanised Iron Pipe/Rex Pipe all as specified and as directed by Engineer-in -charge.

Taking down of Old unserviceable junction box including clamps screws etc all as specified and as directed by Engineer-in -charge.

Taking down of Old unserviceable street light pole with fitting fixture complete all as specified and as directed by Engineer-in -charge.

Supply & fixing IP 66/ 67 thermoplastic-polycarbonate cable junction box of size 205X255X92mm with terminal of totally shock proof, water proof, halogen free, silica free and having internally embedded gasket technology fixing on pole / on surface / on frame with the help of GI clamps of size 25X3 mm ,one MCB SP 6 amps and four way 32 Amp connector complete all as specified and as directed by Engineer-in -charge.

S&F of GI tubular swaged poles complete with GI base plate finial taper plug, bolts, nuts and screws, with two holes for drawing conductor between pole box to street light fitting all as specified type 410 SP-31 of height 9M including necessary Earth work,PCC foundation copping etc and refixing of all existing fitting fixture exist in old electric pole complete all as specified and as directed by Engineer-in -charge.

M&L for Octgonal GI poles complete with GI base plate finial taper plug, bolts, nuts and screws,with suitable bracket all as specified of height 7 M including necessary Earth work,PCC foundation copping etc and including all fitting fixture i.e electrical connection complete all as specified and as directed by Engineer-in -charge.

M&L for PVC/XLPE sheathed heavey duty power cable 1100 Volts grade copper conductor conf IS 1554(Part I) and IS 7089(Part I) with latest amendents of size 1.5 Sqmm foure Core fixed on pole/ walls including fixing arrangement complete all as specified and as directed by Engineer-in -charge.

Material and labour for earthing with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to galvanised iron strip 25 mm x 4 mm thick, by means of GI Welding made out of galvanised iron mild steel and 40 mm dia GI pipe "light grade" for protection of earth lead and connected to control board or transformer neutral earth or as directed including earthing pit in PCC (1:3:6) type C-1, cover slab of required size with one handle made out of 8 mm dia round bar 20 mm dia GI pipe light grade for watering funnels , wire mesh and provided charcoal or coke of alternative layers of 15 cm including necessary earth work complete shown in electrical plated No 3 and tesing complete all as specified and as directed by Engineer-in -charge.

M&L as in repair energy efficient street light luminaire LED type 70 watts 120 lumen / watt ,with light sensor, IP66 ,230volts, 50 Hz , in Deepdrawn aluminium housing and cast aluminium pipe mounting attachment including suitable heavy duty electronic driver also driver should withstand 265 volts and complete accessories, pre-wired and connection complete with suitable size of stranded copper flexible conductor and one no of 10 KV External SPD fixing in cable junction box complete all as specified and as directed by Engineer-in -charge.

M&L as in repair energy efficient street light luminaire LED type 90 watts / 120Lumen / watt IP66, 230volts, 50 Hz , in Deepdrawn aluminium housing and cast aluminium pipe mounting attachment including suitable heavy duty electronic driver also driver should withstand 265 volts,and complete accessories, pre-wired and connection complete with suitable size of stranded copper flexible conductor with 10 KV External SPD fixing with junction box of Street light complete all as specified and as directed by Engineer-in -charge.

M&L as in repair energy efficient solar street light all in one with lithium battery LED type of 3000 to 4000 lumen and more than 150 lumen per watt in built motion sensor colour temp 6500 complete all as specified and as directed by Engineer-in -charge.

Supply and fix GI bracket for street lights made out of medium grade GI pipe 40mm dia, 1.5 mtr long bend to shape as directed, fixed on poles with two Nos GI clamp of size 40 x 6mm flat iron suitable for steel tubular pole including suitable GI nuts and bolts washers complete all as specified and as directed by Engineer-in -charge.

M&L for curring of grooves / chanses for PVC conduit of rquired size for concealed wiring in block masonary of width n.exc.15 cm complete all as specified as directed.

NAVJEEVAN ENTERPRISES

bansal construction

M/s Pooja Enterprises

AMR TRADERS