PROVN OF RAIN SHED OVER FUEL DISPENSATION STATION AT NAD TROMBAY AND PROVN OF DEFICIENT SCOOTER CUM BICYCLE SHED IN NSB MANKHURD AND SPECIAL REPAIRS TO MT POOL AT INS TANAJI, UNDER GE (NW) MANKHURD

Amount

Excavating in post holes( or similar holes) each n exc 0.5 cum , getting out, retunring, fillingin and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in any type of soil.

Excavation in post holes (or similar holes) each n.exc 0.5 cum as in Hard and dence soil and getting out and removing surplus soil to a distance n.exc 50m complete all as specified

Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed.

Surface excavation n. exc 30 cm deep averaging 15cm deep and getting out in soft loose soil complete all as specified

Removing excated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point in soil complete all as specified.

M & L for sand cushioning by spreading in trenches crushed sand by gently by punning down manually as in cable protection all as specified and as directed by Engineer -in-charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.

M & L for type B1(20mm aggregate) 1:2:4 in foundations including rafts footings foundations beams plinth beams bases for coilumns etc

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240.

S & F rolled mild steel in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam,tee, angle, channel or flat sections)incl distance pieces, cleats, etc conforming to grade Fe-410W-(Gde E-250 Quality A).

S & F MS bands, straps, supports or stays for rainwater, ventilating pipes, including bolts if reqd, hooks(stay), hook and pintle hinges, large hasp and staples, clamps, hold fasts, wall ties, plain angle cleats for securing purlins to wood trusses or rafters and similar small articles confirming to Fe-290 Gde E-165.

S & F Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick with AZ 150 GSM of colour having tensile stength of 550Mpa as in roof coverings/cladding to wall, fixed with self tapping screws as specified.(make JSW)

S&F of pre-painting galvalume sheets (Galvalume base-PPGL trapezoidal profile sheets) thickness not less than 0.50mm having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip and straight flashing cut to length and bend to shape fixed with aluminium self tapping screws of size 50/75mm and aluminium washer of suitable size in roof covering all as specified.

Preparation of new steel and iron surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

M & L Cement concrete 1:4:8 Type D2 (40mm graded aggregate) in foundations, filling and mass concrete.complete all as specified and directed

M & L for sand filling under floors or in foundations including watering and consolidation

M & L for machine pressed pre cast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-35 grade with grey cement and pigment.

M&L Machine pressed precast concrete interlocking paver block Coloured any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade over and including 25 mm thick sand cushion complete all as specified

Supply and fixing suspended false ceiling and in vertical surcases using (ACP) Aluminium Composite Panel sheet3mm thick and Aluminium rectanqular pipe for grid system fixed to concrete /plaster surface/steel sections with stainless steel screws incl requisite size of aluminium fillets as directed complete all as specified and as directed.

M & L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line level and curvature jointed with cement moratr 1:3 (1 cement :3 sand) incl making jointing except shall not 5 mm etc complete all as specified

M&L hard core of guage exc 63mm deposited ,spreed and levelled in layers nexc 15cm thick watered and rolled/ rammed to a true surface in broken stone complete all as specified.

M&L 75mm thick cement concrete type D2 1:4:8 (40mm graded aggregate) as in flooring complete all as specified.

M&L for providing 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, surface finished even & smooth without using extra cement, complete all as specified and directed.

M&L 75mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded aggregate) AS in sub base of flooring complete all as specified and as directed

M&L 100 mm thick cement concrete type B-1, 1:2:4 (40mm graded aggregate) as in flooring complete all as specified.

M& L Pre Polished Chequred cement concrete tiles 30cm x 30 cm x 20 mm thick, set, jointed and pointed in near cement slurry in floors with mixture of grey white cement in equal proportions over screed bed or bedding layer of morar 20 mm in cement mortar 1:6 complete all as specified and as directed Make :- Gems / Orient/ Nitco/ Ntc or equivelent

M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler thickness of concrete slab 100 mm and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified.

M&L PCC 1:2:4 type B2 using (40mm graded aggregate) as in foundation complete all as specified

M&L precast cement concrete 1:3:6 type C1 using 20mm graded stone aggregate block masonary with solid blocks exc 10 cm width set in CM 1:4 .complete all as specified

M&L 15mm thick rendering in cement mortar (1:6) on brick/concrete surfaces of walls, finished even & smooth surfaces without using extra cement complete all as specified.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over New / Old surfaces.

S&F steel work as in tubular (round/square/ rectangular shape of pipes as approved by Engr-in-Charge) trusses of semi circle shape upt height 6 mtr including post special shaped washers etc complete incl necessary nut bolts wind tiles and gusset plates etc using ERW or induction butt welded tubes conforming to IS 1161-1998 grade Yst-240 complete all as specified

S&F for framed work as in plates (plain or chequred) channels, square cut or notched with fabriction and erection of FE 410-W (Gde E-250) auality A (ordinary and counter sunk) forming holes without any attachment complete all as specified

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut 5 cm but n.exc 10 cm long, 16 to 20mm complete all as specified

M&L preparation of new or previously untreated surface & applying two coat synthetic enamel Painting over a coat of preiming red red oxide zinc chrome complete all as specified

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water , etc complete all as specified and directed.

Chipping, removing carefully loose/damaged concrete including plastering (total thickness upto 60mm ) from surfaces of RCC members, in any location by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land complete all as specified and directed. Note : 1) Hard concrete shall not be removed by force. 2) Item No.1.00 will not be applicable for the locations/areas where item No.2.00 is applicable.

M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hour between the coats, complete all as specified and directed. [Note :- Mode of measurement: superficial area covered between the end to end reinforcement bars (i.e., concrete area excluding all side covers) will be measured.]

M&L for Anticorrosive Treatment to Reinforcement using IPNET-RB of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces complete all as specified and directed. Note :- Mode of measurement: superficial area covered between the end to end reinforcement bars (i.e., concrete area excluding all side covers) will be measured.

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application complete all as specified and directed.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit, upto 20mm thickness while the bonding agent is still tacking, including levelling, profiling etc, complete all as specified and directed.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit while the bonding agent is still tacking, exceeding 20mm thickness and not exceeding 40mm thickness in two layers, each layer not exceeding 20mm, including levelling, profiling etc, complete all as specified and directed.

M&L for 10 mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing surfaces even and smooth complete all as specified and directed Make: Easy Plast from M/s wall plast or chemplast or readyplast from Ultratech” Note: (i) The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with ready mix plaster and nothing extra shall be payable on this account. (ii) This item shall be operated only for the locations where the thickness of existing adjoining plaster is to be matched

M&L for 5 mm thick polymer modified ready mix cement based plaster on surfaces of ceiling including finishing the surface even & smooth without using extra cement, complete all as specified and as directed. Make : Easy plast from M/s wall plast or chemplast or Readiplast from ultratech. Note: The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with the ready mix plaster and nothing extra shall be payable on this account.

M&L for 12 mm thick polymer modified ready mix cement based plaster on the wall surfaces mixed with liquid water proofing compound in the proportion as per manufacturer’s instructions and including finishing the surfaces of the top layer even and smooth, complete all as specified and directed, Make : Easy plast from M/s wall plast or chemplast or Readiplast from ultratech. Notes : (i) The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with the ready mix plaster and nothing extra shall be payable on this account. (ii) WPC shall be paid for separately.

Supply only liquid water proofing compound.

M&L for prepration of newly plaster surface of wall two coats Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour Incl 2 mm plaster of paris putty complete, as per manufacturer's specification.

M&L for prepration of newly plaster surface of ceiling two coats Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour Incl 2 mm plaster of paris putty complete, as per manufacturer's specification.

M&L for prepration of old plaster surface of ceiling complete removal of existing treatment and two coats Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour Incl 2 mm plaster of paris putty complete, as per manufacturer's specification.

M&L for prepration of old plaster surface of wall complete removal of existing treatment and two coats Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour Incl 2 mm plaster of paris putty complete, as per manufacturer's specification.

M&L for leakage / seepage proof coating consisting of preparing the new/old surfaces of existing exterior walls, parapet walls, chajjas, soffit of beams, columns etc. and applying Primeseal primer of M/s Dr Fixit or equivalent chemical of M/s STP Ltd as approved by the GE or one coat of Chemstic PDE 600 elastomeric coating (and allowing to dry for 8hrs) under torch dry condition and subsequently applying two coats of water proofing decorative elastomeric coating system Raincoat of M/s Dr Fixit with DFT 100microns or Shalicryl 215 of M/s STP Ltd or Chemstic PDE 600 elastomeric coating (the surfaces after painting one coat shall be allowed to dry for 6 to 8hours before application of next coat) including necessary scaffolding etc complete all as per manufacturer instructions and all as specified & directed. Notes. The aforesaid treatment shall be got executed by the contractor from the authorised applicator of the manufacturer(s) and also necessary authenticated documents on account of above shall be submitted by the contractor to the GE.

M & L for preparation of old painted wood surfaces of any description, not otherwise described over 10cm width or girth applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description, not otherwise described over 10cm width or girth applying two coat of synthetic enamel paint over one coat of red oxide, zinc chrome primer complete all as specified and directed.

Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan n.exceeding 6m mean radius built in CM 1:4 all as specified.

Demolition of cement concrete (un-reinforced) in ground floors and pavings any thickness (below or above ground level) all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubish off the premises.

M & L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles n.exceeding 0.36 sqm, in floors etc. set and jointer in neat cement slurry and pointed in white or coloured cement to match the shade incl 15mm thick CM 1:6 screed bed for laying floor finishes complete all as specified and directed.

All as per items No 58 above but in skirting or in dado including 10 mm thick rendering CM 1:4 complete all as specified and directed.

M&L for non skid coloured ceramic tiles7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick CM 1:6 screed bed for laying floor finishes all as specifed and directed.

M&L for Glazed ceramic colour tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchincluding 10 mm thick rendering CM 1:4 complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over screed bed or bedding layer of morar 15 mm in cement mortar 1:4set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as in cills, jambs etc, including moulding/rounding to edges of the slab and also including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

Taking up or down GI steel tubing and connection including fitting, cleaning for reusing if any as specified and as directed for the following sizes:- (a) 15mm bore.

(b) 20mm bore.

S&F GI tubing medium grade with all fitting and fixed complete to walls and ceiling or laid in trenches complete. (a) 15mm dia.

(b) 20mm dia.

S&F cast iron Nahani trap 100mm dia out let including grating connecting jointing to waste pipe with lead jointing and taking out existing unserviceable traps by hacking out concrete joints and making good of surfaces complete all as specified and as directed .

S&F PVC connections 15mm size with PTMT nuts of length 600mm.

S&F towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats (Min wt 190 gms).

S&F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and as directed .

S&F in repairs 15 mm dia bib taps,fancy type chromium plated cast copper alloy with crutch , screwed down screwed for iron or for brass ferrule complete all as specfied and drecetd.

S&F in repairs 15 mm dia bib taps two way cock , cast copper alloy with crutch , screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated Make Jaquar or equivalent make as approved complete all as specfied and drecetd

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs 15 mm Bore dia Pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specfied and drecetd.

S&F in repairs 15 mm bore stop cock cast copper alloy with crutch or for brass chromium plated with fancy shank and cup(concealed type) complete all as specfied and drecetd.

S&F in repairs Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame/aluminium frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

Supply only stainless steel wire cloth 0.36mm mm nominal dial of wire and average width or aperature 1.40mm for fixing to wooden door/ window shutters in any position with new beads/ steel section as required for securing including dismantling of old jalli and painting to match with existing complete all as specified and as directed.

supply and fixing Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane 4 mm thick quality fixing to wooden door/aluminium window shutters in any position with new beads/ steel section as required for securing including dismantling of old jalli and painting to match with existing complete all as specified and as directed.

S& F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

S& F in repairs Brackets for item above complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories)

S & F for 110 mm dia PVC rain water pipes complete all as specified and directed

S & F for 110mm dia PVC bends complete all as specified and directed

S &F PVC (SWR) junction single(single T), 110 mm bore, equal or unequal

S & F in repairs Vitreous China Wash hand basin white, flat back, size 550x400 mm size (flat back or angle back type)excluding taps, waste, chain and plug and procelaim stopper but including cutting for and pinning ends of brackets or erecting stand.incl taking down pillar tap complete all as specified and directed

S&F in repairs for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) plete including provision of lime concrete bedding etc complete all as specified and as directed

S & F for Vitreous china wash down water closet pan “Pedestal Pattern” white, with seat coverwhite closed pattern with flat bottom and cover mild steel chromium plated or aluminium anodized hinging device and joints etc and connection to drain, flushing pipe, anti-syphonage pipe and fixing arrangements with fixing bolts etc including making good the disturbed portion of floor in cement concrete 1:2:4 type B-0, as in repairs, complete all as specified and directed.

Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) n.exceeding 1.5 Sqm each including complete all as specified and directed.

Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) exceeding 1.5 Sqm but not exc 4 Sqm each including complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant as per specifications drawing as directed by the Engineer - in -charge . Material test certificate and authentication should be compulsory provided by the manufacturing company.and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&FSolid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed

S&F aluminum anodised barrel tower bolts of extruded section of size 150 mm length

S&F 150 mm extruded aluminum alloy handles, fabricated type anodised

S&F aluminum anodised sliding door, bolts with hasp and staple ( bolt type ) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy, length of bolts 300 mm.

S&F bands, straps , supports or stays for rain water, ventilating pipes including bolts, clamps, hold fasts etc and similar small articles to Fe-290 Gde-E-165 all as specified & directed.

M&L PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in hold fast, bed plate etc including necessary form work complete all as specified and as directed.

M& L for preparation surfaces of new or previsouly untreated wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge.

S & F 20 mm dia Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Demolition of brick/cement concrete (unreinforced) / pcc tiles from existing roof/terrace etc and also removing/taking down of existing water proofing treatment of any thickness in any position including cleaning the surfaces of roof etc with wire brush complete and removing the retreived debris out side MD land, all as specified and directed.

M&L for PCC (1:2:4 ) type B-1 using 20 mm graded crushed stone aggregate as in levelling courses over RCC roof surface to achieve required slope including rounded or chamfered edges mixed with water proofing compound @ 3% by weight of cement and finishing surface even and smooth using extra cement etc complete all as specified (NOTE :- WPC shall be measured and paid separately as supply only )

M&L for screed bed 10 mm thick on brick work or concrete surfaces finished even and fair in cement plaster 1:4, complete all as specified and as directed with mixing water proofing compound.Note:( wpc shall be measured and paid separately)

M & L for 3 mm thk APP modified roof treatment over existing roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications complete all as specified and directed:- (a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying APP modified water proofing membrane reinforced with non woven polyester fibre weight not less than 160gm/Sqcm using butane torch by torch application with 10cm side lap and 15cm end lap. (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.50 Kg/Sqm. (ii) Non woven polyester weight not less than 160gm /sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sqcm (v) Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi) Elongation : > 20% in both directions. (vii) Impermeability/water tightness at 2 Kgf/cm2. (viii) Water absorption - Not more than 1% on mass within 24 hours. (ix) Cold flexibility - Minimum (-) 20C. (x) Dimentional stability % change = Maximum 1%. (xi) thickness of memberane shall not less than 3 mm. Note bitumen primer will be meaasured seperately

Bitumen primer for use inwaterproofing and damp-proofing treatments

S& F in repairs steell rolling shuters, with out ball bearing, 1.25 mm thick Lath as specified incuding to cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete gear operated type with bevel gear box and crank handle

Supply and laying un-reinforced precast concrete cable cover class LV, type-I, flat size 250 mm x 150 mm x 40 mm laid in trenches all as specified. Make: Mehtab tiles/ National

Supply and Laying or fixing or passing through pipe, XLPE/PVC insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10 Sqmm 4 core including necessary connection and providing cable lugs as required all as specified. Make: Polycab/ KEI/ Grandley

Supply and Laying or fixing or passing through pipe, XLPE/PVC insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16 Sqmm 4 core including necessary connection and providing cable lugs as required all as specified. Make: Polycab/ KEI/ Grandley

M&L for cutting existing road/hard and dence soil not exc 45x50 cm in wide & depth getting out excaveted materials for laying GI tube; returning filling & well rammin watering finish surface 10 cm from top using PCC 1:3:6 not less than 4 inch thick; including removal of surplas soil all as per directed.

S&F of HDPE pipe 50 mm dia, PN-10 for laying in ground, raod crossing etc for cable protection including necessary fittings, clamps for supports, etc all as. Make-Prayag/ Supreme/Prince/ Sudhakar/ Plasto

S&F industrial type LED based luminary fixture for outdoor application with reflector twin tube type operating on 230V, 50Hz AC supply of capacity 36/40 watt surface mounted CCT 5700 degree Kelvin CRI>80 with LED tube rods two No.s suitable for fixing on ceiling/ wall/ beam etc using suitable brackets, nuts, bolts & washers complete all as specified and directed. Make : Bajaj/ Havells/ Crompton/Halonix

M&L Earthing complete with galvanised iron strip 32X6mm earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion Note: (1). 7.5 RM GI strip in deemed to be included in quoted rates beyond 7.5 RM strip shall be measured and paid separately. (2) Rate quoted by the tenderer is deemed to include salt & Charcoal upto & above 450 mm top of GI earth plate.

M & L for point wiring complete with proper colour coding with 1100 Volts grade, 1.5 Sqmm PVC insulated FRLS, unsheathed, wire confirming to IS-694, Part II, ISI marked with multistranded copper conductor drawn in and including PVC concealed conduit of suitable size of wall/ RCC slab/ ceiling/ colunms/ beams etc with all accessories, fittings, PVC junction boxes etc, for mounting modular switches, sockets, fan regulators etc, also including 1.5 Sqmm, PVC insulated, FRLS unsheathed, 1100 Volts multistranded copper conductor green colour as contineous earth wire connected to common earth dolly for one light point/fan/bell point controlled by one way switch, complete all as specified and directed. Note : Rates included for concealed cutting as required at site without any damage and making good in CM 1:4 and matching the surface as required 2 all screws and washer for point wiring shall be Stainless steel. Nothing is extra shall be admisible on this account Make of wire : Polycab/ KEI/ Benlo Make of conduit: Precision/ Presfit

All as per item No. 121 above but wiring complete with 2.5 Sqmm for 3 pin 15 A socket multipurpose on independent board complete all as specified and directed.

Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 2.5 sq mm ,4 core, 1100 Volts grade. Make: Polycab/ KEI/ RPG

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. Make : Bajaj/ Wipro/ Jaquar

S&F 6 way DB double door type Triple pole and neutral operating on 415 V, 50Hz, AC supply complete comprising the following accessories a) MCB SPN 25 Amp 10 KA 'C' series- 02 Nos b) MCB SP 25 Amp 10 KA 'C' series- 02 Nos Make: C&S/ Legrand/ Schnieder Note : A sum of Rs 10,906.00 towards sch of credit shall be deducated to arrive the contract sum.

mp construction co (BID ID -3091615)

M/S KHUSHI ENTERPRISES (BID ID -3092257)

sahajanand const co. (BID ID -3091897)

Parmatma Enterprises (BID ID -3092201)

M/s Mukesh Engineers (BID ID -3092231)

Joy builders (BID ID -3091901)

H R ENGINEERS (BID ID -3091538)