CONSTRUCTION OF COMPOUND WALL WITH SHED NEAR OFFICE BUILDING IN VIKKARAVANDI TOWN PANCHAYAT

Amount

Earth work excavation in all classes of soils such as hard stiff clay, stiff black cotton soil, hard red, earth mixed with 50% fair sized boulders and hard gravelly soil and depositing on bank with initialed and lift as per SS 20A inclusive of shoring strutting waling and bailing out water where ever necessary forming protective bunds, coffer dams and including refilling charges around and all other incidental charges etc., complete complying with standard specification for foundation SS. No. 23 SSRB.

Plain Cement Concrete 1:4:8 mix using 40 mm ISS HBG Jelly including cost & conveyance of all material to site and all labors etc complete.

Supply and fabrication of steel including cost and conveyance of steel and labour charges for cutting, bending, grilling, tying and fixing in position as per standard specification.

Centering for sides and soffiots including necessary supports and strutting as directed by the departmetal officers. Rate for 10m2 for the following items (RCC floor slab, Rectangular/ Square, Tee/ Ell beams. Lintels.Without Strutting

With Strutting

Reinforcement CC 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of reinforcement and favricative charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roofs Below Basement

Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Supplying and fixing of Roof truss of approved design for Purlins, rafter and Columns using necessary mild steel Channel and angles for inner and outer memebers which should be fixed to Roof frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Supplying and fixing Pre painted Galvalium Sheet 0.47mm thick using necessary trusses, purlins and ''U" or "J" bolts, nuts, screws, nails and bitumen washers including cost of labour and materials etc., complete complyingg with standard specification as directed by the departmental officers.

Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality – 10m2.

Brick Work in Cement Mortor 1:5 Mix (one cement, five M.Sand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Plastering with cement mortar 1: 5 ( one cement and five P.Sand) mix to 12mm thick including cost and conveyance of all materials to site including curing etc.,complete as per standard specification

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (for electronic regulator) SD16

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box in flush with wall with 3mm thick hylum sheet for 15A 3pin non interlocking flush type CS plug with painting suitable colour with continuous earth wire connection of 14 SWG TC wire for open power plug point SD14

SANTHAN