Balance work for construction of Lecture Block-C Govt. Boys Degree College at Bohipora Kupwara

Amount

Centring and shuttering including strutting, propping etc. and removal of form work for

Foundations, footings, bases of columns etc. for mass concrete

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Suspended floors, roofs, landings, balconies and access platforms.

Columns, pillars, piers,abutments,posts and struts

Arches,domes,vaults up to 6m span

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete jobs above plinth level. Thermo Mechanically Treated bars of grade Fe 500D or more including cost and carriage of material- complete job Note:- Out of the total advertised quantity of 16000.00 kg TMT steel bars of sorts in item no. 2, departmental supply is available about 7600 kg which shall be used by the successful bidder as per drawing from the consultant and the cost of the same departmental material shall be deducted from the bill of the successful bidder at the rate of Rs 72.00 per kg

Reinforced cement concrete work in walls (any thickness) , including attached pilasters buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor –v level including curing but excluding cost of centring and shuttering and including cost and carriage of all the materials involved. 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size )

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15%, landing, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases, spiral stair cases upto floor –v level including curing but excluding cost of centring and shuttering, finishing and reinforcement and including cost and carriage of all the materials involved. 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size )

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering including cost and carriage of all the materials involved. 1: 2: 4 (1cement : 2 coarse sand :4 graded stone aggregates 20mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering including cost and carriage of all the materials involved. 1: 4: 8 (1cement : 4 coarse sand :8 graded stone aggregates 40mm nominal size)

Providing and laying dry stone soling including ramming, watering and carriage of material from source to site of work-complete job

Providing and filling nallah muck including ramming, watering and carriage of material from source to site of work-complete job.

Making plinth protection 50mm thick of cement concrete!:3:6 (1cement : 3 coarse sand :6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballasts/stone soling 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete.and including cost and carriage of all the materials involved. Complete job.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement :6 sand) and including cost and carriage of all the materials involved. Complete job.

Extra for brickwork in superstructure above plinth level up to floor –V level.

Providing woodwork in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast or with dash fastener of required dia. and length (hold fast or with dash fastener shall be paid for separately). 2nd class deodar wood

Providing and fixing of 40x5mm flat iron hold fasts 40cm long to frames of doors ,windows and ventilators including embedding in cement concrete block 30x10x15cm 1:3:6 mix (1cement:3 coarse sand:6 graded stone aggregates 20 mm nominal size)

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately , all complete as per direction of Engineer-in –in charge.

Providing and fixing 35 mm thick glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed Butt hinges bright finished of required size with necessary screws 2nd class deodar wood. Note:- Out of the total advertised quantity of 124.00 sqm of deodar wood glazed shutters in item no. 14. Some quantity of departmental supply is available which shall be used by the successful bidder as per drawing and the cost of the same departmental material shall be deducted from the bill of the successful bidder at the rate of Rs 390.00 per square feet.

Providing and fixing panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick second class deodar wood.

Providing and fixing 35 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4mm in both directions with wire of dia 0.63 mm for doors windows and clerestory windows with ISI marked M.S pressed butt hinges bright finished of required size with necessary screws, as per direction of Engineer-in –in charge 2nd class deodar wood

Providing and fixing of 3mm to 4mm thick float glass panes ( weighing not less than 10 kg/Sqm ) including cost of beading and nails –complete job

Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of approved steel primer complete and including cost and carriage of all the materials involved.

Providing and fixing colour precoated galvanized iron profile sheet (size, shape and pitch of corrugation as approved by engineer -in-charge 0.50mm(0.05%)per Sqm as per IS277, in 240mpa steel grade 5-7microns epoxy primer on both side of the sheet and polyester top coat 15-18micron sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation. The sheet shall be fixed using self-drilling, self-lapping screw of size (5.5.×55mm) with EPDM seal or polymer coated J& L hooks bolt and nuts 8mm dia. limpet washers, complete up to any pitch in horizontal/ Vertical or curved surfaces, excluding the cost of purlin,raftars and trusses and including cutting to size and shape wherever required. complete job.

Providing ridges & hips/valley of width 60cm/90cm plain colour coated G.S. sheets fixed with polymer coated J & L hooks bolts and nuts 8 mm dia. limpet washers using 0.50 mm thick G.S plain sheets .

Providing & fixing plained eaves boarding of 2nd class deodar wood of size 300 x 40 mm (nominal size).

Providing wood work in frames of false ceiling, partition etc. sawn and fixed in position using Budloo wood.

Providing & fixing 20 mm thick wooden plank ceiling for soffits (frame work for base to be paid for separate) with M.S screws using Budloo wood.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make ,in all colour and shades laid on 20mm thick cement mortar 1:4(1cement:4coarse sand ) including grouting the joints with white cement and matching pigments etc. complete (size of tiles 600x600 mm)

Cement sand plaster on rough/fair side on Brick masonry walls brick wall using cement sand mortar 1:4 mix. Including cost and carriage of all the material involved.

15mm Thick

12mm Thick

Distempering with oil bound washable distemper of approved brand & manufacture two or more coats of required shading incl. priming coat with cement primer to give an even shade.

Applying primer coat with ready mix pink or grey primer of approved brand and manufacture on wood work.

Painting with synthetic enamel paint of approved brand and manufacture for wood work including cost of priming coat.

Providing & applying Cement Based putty of 2mm thickness of approved brand and manufacture over plastered surface to prepare the surface even & smooth complete.

Providing and laying ceramic glazed floor tiles 300*300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15822 of approved make laid on 20mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand ) including pointing the joints with white cement and matching pigments etc. Complete

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours , shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1 : 3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per Sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing fixing wooden moulded corner beading of size 50x50xmm (base and height ) of triangular shape to the junction of panelling etc. with iron screws , plugs and priming coat on exposed surface etc. complete. Second class kail wood

Providing and fixing Aluminium window stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1866) transparent or dyed to required colour and shade with necessary screws etc. complete.

b) AL drops

i. 12’’ long

ii. 10’’ long

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames

Providing and fixing aluminium work for doors, windows, ventilators and partition with extruded built up standard tubular sections/appropriate z-sections and other sections of approved make conforming to is: 733 and is: 1265, fixed with dash fastener of required dia. and size and necessary filling up of gaps at junctions i.e. at top, bottom, and sides with required EPDM rubber/neoprene gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws and including cost of hinges, dash fasteners and double action hydraulic floor spring of approved brand – all complete as per architectural drawings and the directions of Engineer-in-charge (glazing, panelling to be paid for separately ) including all consequential and incidental costs like all leads, lifts, carriages and scaffolding etc complete job .For shutters of doors, windows and ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including cost of EPDM rubber, neoprene gasket required ..complete Anodized Aluminium (Anodized transparent or dyed to required shade according to IS:1868 minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge (cost of aluminium snap beading shall be paid in basic item) With floating glass panes of 5.0mm thickness (weight not less than 10.00kg/sqm)

Providing and fixing of 4mm thick Aluminium composite panels(ACP) for door shutters /partitions double bound including cost of aluminium press beadings(Double composite panels). complete

Providing and fixing of double action hydraulic floor spring IS:6315 with brass cover plate minimum 1.25mm thick of approved brand. complete job

Providing and fixing aluminium tower bolts ISI marked (anodised anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1866) transparent or dyed to required colour and shade with necessary screws etc.

Supplying, manufacturing structural steel work for seating arrangement in lecture halls as per approved design and as per the direction of Engineer-in-charge including cutting, welding and applying priming coat of approved steel primer and including carriage up to site of work .complete. Note:- Out of the total advertised quantity of 5905.00 kg of structural steel of different sections in item no. 41, some quantity of departmental supply(fabricated /unfabricated) is available which shall be used by the successful bidder as per drawings and the cost of the same departmental material shall be deducted from the bill of the successful bidder at the rate of Rs 82.75per kg for fabricated material and Rs 73.00 per kg for un fabricated material.

Providing and fixing in position 40mm thick 2nd class deodar wood plained planks including moulding of edges fixed to steel frames of seating arrangement in lecture halls and including cost of all necessary fittings and applying two or more coats of varnish. Complete job.

Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge over 20mm(average) thick base of cement mortar 1:4(1cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing, and cutting and including cost and carriage of all the materials involved. complete with Agarla white 16mm thick

40mm thick fine dressed stone flooring over 20mm (average) thick base of cement mortar 1:5 (1 cement: 5 coarse sand), including pointing with cement mortar 1:2 ( 1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone and curing and including cost and carriage of all the materials involved. Red sand stone complete.

Cement concrete flooring: 2:4(1cement:2 coarse sand:4 stone aggregate 20mm nominal size) finished with floating coat of neat cement including cement slurry and curing and including cost and carriage of all the materials involved. complete. 25 mm thick

Earth work in bulk excavation by mechanical means over areas exceeding 30cm in depth, 1.5m in width as well as 10 sqm 0n plan) including disposal of excavated earth lead up to 50metres and lift up to 1.5metres as directed by Engineer-in-charge

Dry Random rubble masonary with hard stones in foundation and plinth using quarry stones including cost of bond stones and including carriage of stones from source to site of work for an average lead of 20.0km by mechanical transport

Extra for random rubble masonary with hard stone curved on plain for a mean radius not exceeding 6m

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (HINDWARE/ PARRYWARE/ CERA make) or equivalent make.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. (HINDWARE/PARRYWARE/CERA make) or equivalent make.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. (HINDWARE/ PARRYWARE/ CERA make) or equivalent make.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing counter wash basin with 15mm c.p. brass pillar taps, 32mm c.p brass waste pipes of standard patterns including cutting the counter to required shape and size and fixing counter basin –complete. White vitreous china round basin size 405x355mm with a pair of 15mm c.p brass pillar taps. (HINDWARE/PARRYWARE/CERA make) or equivalent make

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing toilet paper holder C.P. brass

Providing/laying and fixing following B-Type PVC soil waste, water waste and vent. Pipes etc. (Prince/Supreme/Finolex or equivalent make) including excavation, cutting and making good the walls.

150mm dia.

100mm dia.

75mm dia.

Providing and fixing following B-Type PVC fittings etc. (Prince/Supreme/Finolex or equivalent make)

150mm dia collars

100mm dia. collars

75mm dia. collars

100mm dia. Door bend

100mm dia. Door Tee

75mm dia. Door Tee

75mm dia. Floor trap

Perforated end caps 100/75 mm dia.

PVC reducers of different diameters

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Concealed pipe including painting with anti-corrosivebitumastic paint, cutting chases and making good the wall: (JINDAL/PRAKASH SURYA make ) or equivalent make

15 mm dia. nominal bore

20 mm dia. nominal

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) : (JINDAL/PRAKASH SURYA make ) or equivalent make.

20 mm dia. nominal bore

25 mm dia. nominal bore

65 mm dia. nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore

Providing and fixing brass stop cock of approved quality.

15 mm nominal bore

20 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

25 mm nominal bore

65 mm nominal bore

Providing and fixing PVC connecting pipes of standard/ approved quality. 60cm long 15mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay (non modular) bricks

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. With cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cockof approved quality conforming to IS standards and weighing not less than 810 gms (JAQUAR/PARKO/CERA or equivalent make).

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 (JAQUAR /PARKO/ CERA or equivalent make)

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm)of approved make and quality as per direction of Engineer-in charge (JAQUAR/ PARKO/ CERA or equivalent make)

Providing and fixing 15 mm nominal bore of standard type C.P. Brass basin mixer and wall mixer of approved quality and make, weighing not less than 1.970 kg. (JAQUAR/PARKO/CERA or equivalent make)

Basin mixer

Wall mixer

Providing and fixing PTMT grating of approved quality and colour.. 150 mm nominal size square 100 mm diameter of the inner hinged round grating. (JAQUAR/PARKO/CERA or equivalent make)

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls. 15mm nominal bore, 105mm long, weighing not less than138gms. plastic balls. 15mm nominal bore, 105mm long, weighing not less than138gms. (JAQUAR/ PARKO/ CERA or equivalent make)

Providing and fixing standard quality make Health Faucet with holder (JAQUAR/PARKO/CERA or equivalent make)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete (JAQUAR/ PARKO/ CERA or equivalent make)

15 mm nominal bore

20 mm nominal bore

Providing and placing on terrace (at all floor levels) or in ground polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (SINTEX/ ELECTROPLAST/STAR or equivalent having ISI license and Anti-bacterial )

Providing, installation and testing of water heater geysers of approved quality and manufacture (Venus/Bajaj/Racold or equivalent make ) mounted on bolts, well anchored in walls and connected with hot and cold G.I/PVC connections with superior angle valves as required-50 litre capacity

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement: 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5coarse sand (zone- III) : 3 graded stone aggregate 20 mmnominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III): 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with. a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

Inside size 90x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I.cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete asper standard design : Inside dimensions 500x700 mm and 45 cm deep for single pipe line with one or two inlets

Providing and fixing cast iron manhole cover including frame of same material

Supplying and fixing submersible water pump of 2HP including cost of fitting and required accessories and stabilizer of required capacity-complete job

Providing and fixing pvc conduits 40mm dia. including all fixtures (Anchor, poly cab or equivalent)

M/S TR INFRA

GEOMATICS INFRASTRUCTURE PRIVATE LIMITED

Farooq Ahmad Dar

M/S MFL INFRASTRUCTURE PVT LTD