Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.3 CrAccepted-AOC 1391 SECTOR 57 PART II 122003 | GURUGRAM | HARYANA | 122003 | ₹1.3 Cr | 1 | Accepted-AOC 1 |
| 2 | 2₹1.7 Cr+₹40.0 L (30.3%)Rejected-AOC | ₹1.7 Cr+₹40.0 L (30.3%) | 2 | Rejected-AOC 2 |
| 3 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | The Sudkan Khurd Nehra Co Op L C Society Ltd L2 | JS SYNERGIES PRIVATE LIMITED L1 |
|---|---|---|---|---|---|
| 1.00 | Supply and installation of Re-Polymer based modules of make (Honeycomb Structure) made up of recycled polypropylene capable of taking vehicular movement up to 30 tonnes with adequate backfilling and 4 small plates combination creating 4 spans inside the module. These modules are made from combination of large (683*410mm) and small (369*410mm) plates along with external locks. Each large plate should have minimum fourteen external locking slots in order to give stability to tank. These tank should have optimum connection and block stability using double lock stability. Each single tank is made of four large and four small plates in case of single tank and 13 large and 16 small plates for quadruple tank. Capacity of single tank is (.683*.410*.450 mtr) equals to 0.126 CUM(gross). Weight of each large plate should be minimum 1.3 Kg and each small plate should be at least .650 Kg. The design to be approved by Engineer-in-Charge. | 650.71 | Per Cum | 9,500 ₹61,81,745 Lowest | 9,600 ₹62,46,816 |
| 2.00 | Supply and installation of non-woven geotextile having thickness of 400 GSM, having minimum tear strength
of 250 ASTM D4533, Width wise minimum 215 ASTM D4533 having puncture strength of 1550 plus as per
ASTM D6241 Having elongation at Break of 57% plus as per ASTM D 4595 in double layers, made out of
long fibres to hold the modules including cutting, sizing, Heat welding and needle punched for high porosity
and proper percolation. complete as per entire satisfaction of engineer-in- charge. | 1,610 | Sqm | 80 ₹1,28,800 Lowest | 140 ₹2,25,400 |
| 3.00 | Supply and installation of FRP based filtration device with diameter of 750 mm and height 1000 mm having
inlet of 160mm and outlet of 160mm. capable of filtration in two stage, upper layer has SS304 mesh which
can filter out solid suspended particle up to 600 microns and lower membranes is capable of filtering up
to 90 microns. Flow rate of filtration device is up to 80 KL / hr. (FRP based RWH Filter). Approved from GRIHA
complete (GRIHA V. 2015: criterion:18, GRIHA V.2019: criterion :15, SVAGRIHA: criterion:9) as per
entire satisfaction of engineer-in- charge. | 13 | one unit | 51,115 ₹6,64,495 | 45,494 ₹5,91,422 Lowest |
| 4.00 | Non Clogging SS filter with flat end having 153 mm inside dia and 163 mm outside dia and
500 mm length, 0.5 mm slot with integrated flange, rubber washer, bolts, PVC fitting,
threaded flange.
Filter is ready to use, flexible and modular: designed for huge volume and flow of rainwater.
The SS 304 filter element is non clogging in nature and can be integrated at various habitats
.Flow rate must be minimum 40 Cum/hr. Wires in filter with a V-shaped profile arrangement. | 35 | per | 23,500 ₹8,22,500 | 20,915 ₹7,32,025 Lowest |
| 5.00 | Providing and fixing UV-stabilized nylon mesh net of 150–200 GSM, mesh opening size
approximately 0.5 mm to 1 mm, cut and wrapped securely around the outlet pipe of SS
wedge wire filter using rust-resistant binding wire or stainless steel clamps. The mesh shall
act as a secondary barrier to prevent fine suspended matter, organic debris, and silt from
entering the recharge zone. It shall be tightly secured and easily removable for routine
cleaning. | 41 | one unit | 450 ₹18,450 Lowest | 600 ₹24,600 |
Tender Value
₹1.5 Cr
EMD Value
₹3.0 L
Closing Date
30 Mar 2026, 12:00 pmClosed
Sandeep Kumar
Municipal Corporation Gurugram
Construction of 2 Nos. 200Cum Capacities Modular Rainwater Harvesting Systems of Using Polypropylene Block Structure and 400 GSM Geotextile Sheet in Shaheed Bhagat Singh Park and Netaji Subhash Chandra Bose Park in Ashok Vihar Phase-III,Ward No.-02
2026_HRY_509353_1
2026D45B77D4 DA45 4240 B799 4625E9B2E070285ULB
Open Tender
Civil Works
Works
230 days
Gurugram
2 documents required · 2 mandatory
₹15,000
₹3.0 L
Yes
8 Jul 2026
19 Mar 2026
30 Mar 2026
19 Mar 2026
30 Mar 2026
19 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply and installation of Re-Polymer based modules of make (Honeycomb Structure) made up of recycled polypropylene capable of taking vehicular movement up to 30 tonnes with adequate backfilling and 4 small plates combination creating 4 spans inside the module. These modules are made from combination of large (683*410mm) and small (369*410mm) plates along with external locks. Each large plate should have minimum fourteen external locking slots in order to give stability to tank. These tank should have optimum connection and block stability using double lock stability. Each single tank is made of four large and four small plates in case of single tank and 13 large and 16 small plates for quadruple tank. Capacity of single tank is (.683*.410*.450 mtr) equals to 0.126 CUM(gross). Weight of each large plate should be minimum 1.3 Kg and each small plate should be at least .650 Kg. The design to be approved by Engineer-in-Charge. | |||||
| 2Supply and installation of non-woven geotextile having thickness of 400 GSM, having minimum tear strength of 250 ASTM D4533, Width wise minimum 215 ASTM D4533 having puncture strength of 1550 plus as per ASTM D6241 Having elongation at Break of 57% plus as per ASTM D 4595 in double layers, made out of long fibres to hold the modules including cutting, sizing, Heat welding and needle punched for high porosity and proper percolation. complete as per entire satisfaction of engineer-in- charge. | |||||
| 3Supply and installation of FRP based filtration device with diameter of 750 mm and height 1000 mm having inlet of 160mm and outlet of 160mm. capable of filtration in two stage, upper layer has SS304 mesh which can filter out solid suspended particle up to 600 microns and lower membranes is capable of filtering up to 90 microns. Flow rate of filtration device is up to 80 KL / hr. (FRP based RWH Filter). Approved from GRIHA complete (GRIHA V. 2015: criterion:18, GRIHA V.2019: criterion :15, SVAGRIHA: criterion:9) as per entire satisfaction of engineer-in- charge. | |||||
| 4Non Clogging SS filter with flat end having 153 mm inside dia and 163 mm outside dia and 500 mm length, 0.5 mm slot with integrated flange, rubber washer, bolts, PVC fitting, threaded flange. Filter is ready to use, flexible and modular: designed for huge volume and flow of rainwater. The SS 304 filter element is non clogging in nature and can be integrated at various habitats .Flow rate must be minimum 40 Cum/hr. Wires in filter with a V-shaped profile arrangement. | |||||
| 5Providing and fixing UV-stabilized nylon mesh net of 150–200 GSM, mesh opening size approximately 0.5 mm to 1 mm, cut and wrapped securely around the outlet pipe of SS wedge wire filter using rust-resistant binding wire or stainless steel clamps. The mesh shall act as a secondary barrier to prevent fine suspended matter, organic debris, and silt from entering the recharge zone. It shall be tightly secured and easily removable for routine cleaning. | |||||
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.79 MB
BOQ_588147.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .