SPL REPAIR TO BLDG NO P-219, P-95 (COOK HOUSE MED REGT) PARKING SHED FOR 02 AND 04 WHEELER NEAR BLDG P-05 AND HARD STANDING AT KR VIHAR (E) AT RATNUCHAK MIL STATION UNDER GE KALUCHAK

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise as dircetd and as specified.

M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, in wall/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:3) complete all as specified

M&L for Non - skid Ceramic tiles light shade 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick in CM 1:4 screed bed all as specified.

M&L machine cut Kota stone slab 18-20 mm thick as in flooring or trades of step incl half round moulding over and including screed bed 20 mm thick in CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.

M&L machine cut Kota stone slab 18-20 mm thick as in riser to step including 10 mm thick rendring in CM (1:3) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.

M&L for cleaning old Kota stone surface using mechanical means and polishing with Bee wax polish complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness as in floors, apron etc laid, bedded and pointe in any mortar complete all as directed.

Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site as directed

Supplying and laying of 20 mm bore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in trenches ,laid concealed in floor or wall including all fittings suitable for fixing of plumbing fixture complete all as specified

Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site as directed

S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors or fixed to walls etc complete all as specified and as directed.

Fixing only 20 mm bore old steel water tubing and connection in new or old position to wall and ceiling or laid in floors jointing and testing of old retrieved serviceable galvanized mild steel water tubing with and including all fitting (such as bends, elbows, tees, short pieces, connectors, back nuts, deminishing pieces caps, plugs and union etc) complete all as specified and directed. NOTE: - OLD STEEL WATER TUBING OBTAINED FROM DISMANTLING SHALL BE USED UNDER THIS ITEM.

Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick fair faces of brick / concrete surfaces in cement mortar 1:4 finished even and smooth with out using extra cement with mixing of water proofing compound complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:6 on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick plastering in CM (1:3) on celing,soffits of slab,chjjas,columns and beam etc and finised the plaster surface even and smooth without using extra cement complete all as specified and directed.

M&L newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall putty to wall surface complete all as specified and directed.

M&L for Complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall putty to wall surface complete all as specified and directed.

M&L preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing complete all as specified and directed.

M&L complete removal of existing treatment of ceiling and applying three coats of white washing complete all as specified and directed.

Meterial and labour for preparation of newly plastered wall surface and applying two coat of premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay echnology, Excellent Dirt Pick up resistance of Berger Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specification, Anti Algal properties in Two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instruction applied over one coat 1"1 ratio as per manufacture's instruction and all coats incl primer to be applied with fully automatic airlesspray machine of paint application with a flow speed of inium 1 ltr per minute having a pressure of 300 PSI. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed Make : Berger Paints Weathercoat Long Life Flexo/ Nerolac Paints excel Total/ Asian Paint Apex Ultima/ JK Maximo Ultra. Notes for smart periodicals (a) Work shall be done as per MoU between tenderer and manufacturer of paints and their authorized applicator complete all as specified and directed (b) the contractor shall upload MoU between tenderer and manufacturer of paints and their authorized applicator before quoting the bids and submit the same alongwith tender & other Documents as mentioned in NIT (c) Cost of scaffolding at any height shal be included in thequoted rate. (d) Preparation of plastered or unplastered surface of removal of existing treatment by scrappigng of walls, chajjas, ceiling, fins, fascias, parapets etc shall be done by using mechanial sander with internal dust extraction system for clean environment certified by the manufacturer. After the prepartaion of surface written approval shall be obtained from GE before applying primer and further tratment/ coat. Bldg wise stage passing register shall be maintained. (e) Finishes ie cement based paint, acrylic water based exterior grade primer, premium acrylic smooth exterior emulsion etc to walls, ceiing, chajjas, fins, fascias, parapets etc shall be applied using airless spray technology and capable of operating single spray gun with a suitable hose length. the spray machine should be of manufacturer with pro-guard technology and capability of tracking pressure as well as paint and primer usage. (f) This equipment shall be certified by approved manufacturer. (g) The accessories for applying the finishes shall be spray in hard to reach areas ad penetration of finishes on the surface so as to achieve uniform application and quality surface finish. Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'AB' on page no. 103 of tender documents as per Sch 'A' Note No 19 Page No 17). .

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for providing plain cement concrete type B-1, 1:2:4, (using 20 mm graded stone aggregate), as in benching, copings, bed block for filing hollow space of steel chowkhats, including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

Taking down cement plaster and decayed concrete of any description, upto triple storey of building, from roof projection, chajjas etc and making good the decayed portion with cement mortar 1:3 mixed with water proofing compound or mixed with WPC or PCC 1:2:4 type B-0 (using 12.5mm graded aggregate) including necessary form work, fixing of GI wire netting 0.90mm dia and 12mm mesh in patches area n.exc 5.00 Sqm where ever required and finally finishing the surface with 15 mm thick cement plaster in CM 1:3 and applying two coats of white wash/colour wash/cement base paint/exterior emulsion paint to match the existing surface /finish, complete all as specified and as directed.

M&L for sunken treatment with glass fiber reinforced modified cementitious coating system before the final coat of Latex Shield 2K (or equivalent) complete all as following :- Base Coat : Berger HS Latex plus (or equivalent) consumption base coat : 0.3 kg/m2 Reinforcement : Glass fiber Second and Third coat : Latex sheild 2K (or equivalent) Consumption top coat : 3 kg/m2 System reqquirements : density : 2.00 kg/ltr; Compressive strength: 0.5N/mm2 Wall penetration through the RCC slab must be sealed using Berger HS Repair (or equivalent). Intersection of base slab with wall must be provided with a 50 mm fillet using Berger HS Latex plus (or equivalent) modified mortar with a bonding coat of Berger HS Latexplus (or equivalent) modified cement slurry upto sft. All depressions, unevenness, surface honeycombng shal be repaired using Berger HS Latex plus (or equivalent) modifiled polymer mortar with a bonding coat of Berger HS latex plus (or equivalent) modified cement slurry. Including cleaning of RCC surface to remove dust, loose paricles, etc with compressed air or any other suitable technique depending on site conditions, grinding aby sharp edges, etc. Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'EF' on page no. 111 of tender documents as per Sch 'A' Note No 19 Page No 17).

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with water proofing compound tobe finished even and smooth without using extra cement complete all as specified and as directed (WPC to be measured and paid separately) complete all as specified and as directed.

Supply only Integral water proofing compound liquid complete all as specified and as directed.

S&F 20mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in as spout pipes to pour out residual water out from the treated area complete all as specified and as directed.

M&L Cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregate) in foundations, filling and mass concrete in sub base complete all as specified and as directed.

M&L for 25mm thick PCC (1:2:4) type B1 with 20mm graded aggregate for laying floor tiles complete all as specified and as directed.

S & F in repair polymer white (polypropylene Delrin and ABS) low level flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, flush pipe, brass screws, handle etc complete having BIS description mark with IS: 7231 with and including 32 mm bore PVC flush pipe of suitable length complete all as specified and directed.

S & F in repairs water closet vitreous china squatting pan ‘Orrisa’ pattern size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in lime concrete bedding (one lime, two sand or surkhi and 5 aggregate) minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes complete including making good floor complete all as specified and directed.

S & F in repair 20 mm dia stainless steel tubular towel rail 'D' type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed.

S & F in repairs chromium plated soap dish complete all as specified and directed

S&F in repairs Bib taps (long body )fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected.

S & F of vitreous china, wash hand basin, flat back, white of size 580mmx450mm including brackets,including pedastal 32 mm waste pipe brass CP waste coupling 32mm dia with long screwed shank and fly nuts, chain and plug, porcelain stopper including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs, complete all as specified & directed

S&F in repair 15 mm dia bore pillar taps cast copper alloy with capstan heads chromium plated fancy type fixed in repairs 15mm bore fancy type screwed down, high pressure with long screwed shanks and fly nuts, screwed down for iron pipe or for union.

S & F in repair 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed

S&F in repairs stop valves fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union all complete as specified and as directed. .

S & F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) complete all as specified and directed.

Dismaintling of 75mm to 100mm bore cast iron pipe jointed in cement mortar and taking out of trenches or any description and any position as required complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to wall /floor complete all as specified and directed.

S & F of 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to wall /floor complete all as specified and directed.

S & F PVC (SWR) bends any radius 110mm bore provided with access door 110mm bore complete all as specified and directed.

S & F PVC (SWR) bends any radius 110mm bore provided with access door 75 mm bore complete all as specified and directed.

S & F in repairs PVC (SWR) branch piece (Single T extra) equal or unequal 110 mm dia with oval access door complete all as specified and directed.

S & F in repairs PVC (SWR) branch piece (Single T extra) equal or unequal 75 mm dia with oval access door complete all as specified and directed.

S & Fixed in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing to waste pipe fixed in PCC (1:2:4) type B1 complete all as specified and directed .

S & F PVC (SWR) branch piece with access door single 'Y' equal or un-equal 110mm bore complete all as specified and directed.

S & F PVC (SWR) branch piece with access door single 'Y' equal or un-equal 75mm bore complete all as specified and directed.

S & F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

Taking down chowkat with shutter n. exc. 1.5sqm each (without taking off shutter from the Frame).

Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified & directed.

Taking down shutter of any description but exc 1 sqm and n. exc. 2 sqm each complete all as specified and directed.

Taking down chowkat with shutter n. exc. 1.5sqm each (without taking off shutter from the Frame) abd refixing in same opening

Refixing shutter of any description but exc 1 sqm and n. exc. 2 sqm each in same opeining etc complete all as specified and directed.

S & F of pressed steel frames of size 125mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate., complete all as specified & directed. NOTE : PCC for filling of hollow portion shall be measured and paid for separately.

S & F Factory made box type steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube with double side shutters (Wire Gauged shutter and Glazed Shutter), side hung shutters with MS handles and MS stays dovetailed or welded including 02 nos MS Tower Bolt 150mm long for each leaf, 8 mm square guard bars at spacing as shown in drawings, MS flat iron frame work, MS hinges, tarred hold fast, PCC 1:2:4 type B1 as in bed of hold fast, 01 No. per leaf of stopper of 100mm size, one coat of red oxide zinc chrome primer etc, complete all as specified . Note : a). Wire cloth and Sheet glass shall be measured and paid seprately under respective items. b). Rate of both type of shutters is inclusive in the quoted rate.

Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in repair in opening as per specification and drawing complete as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet 5mm thick to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplied & fitted in the frame at site as per specification & drawings shown in SSR Part-II, complete as specified & directed.

S&F Flush Shutters, 30mm thick, soild core construction with block board core and both faces covered with decorative face veneers with lipping/frame to match, complete all as specified & directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads or glazing pins in metal frame in squares not exc. 0.5 Sqm in each pane, complete all as specified & directed.

S & F stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and directed

S&F 200 mm long Aluminium anodised barrel tower bolts complete all as specified & directed.

S&F 150 mm size aluminium anodised door handles complete all as specified & directed.

M&L for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed.

S&F 300 mm ordinary mild steel rat tail rod pattern spring incl roller and roller plate complete all as specified and directed

S&F Butt hinges, medium weight, cold rolled, mild steel 150mm long, complete all as specified & directed.

M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth including knotting and stopping and applying one coat of synthetic enamel paint (any tint/Shade) complete all as specified and directed.

M & L for preparation of steel surfaces over n.exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint (any tint/shade) complete all as specified and directed

M&L 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including impression and glass strip or bitumen filling in two panel etc complete all as specified and as specified and directed.

S & F 20 mm bore gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Complete removal of existing roof treatment or roof tile and removing from site to a place outside defence land as specified by civil authorities and clean the surface of roof with water and remove dust complete all as specified & directed.

Cleaning of the exposed concrete slab and repairing the surface irregularities like cracks, potholes, as per manufacturer's method statement by using Berger HS Rapairo(or equivalent)along with HS Latex Plus(or equivalent)& cement in mixing ratio of 1:4 where ever required complete all as specified and directed.

M&L for Home Sheild PU Roofkoat (or equivalent) is a one component liquid, solvent free, cold applied water-proofing membrane that is highly elastic and UV resistant with 10 years warranty. ASTM D 6083-97 a waterproofing and heat reflecting system having following key performace properties : 1. UV resistant, prevent yellowing and weathering 2. Highly elastic upto 350% and crack bridging 3. Excellent adhesion on porous and non-porous substrates 4. Tensile strength > 10 N/mm2 with Geo Textile fleece 5. Soler reflective Index (SRI) more then 109-111 ASTM E 1980-11 System : First coat : Providing and applying primer over the prepared surface with HS PU roofkoat Primer (or equivalent) Coverage :0.2kg/m2 (with 50 % dilution of water) Reinforcement : Geotextile 40 gsm Second coat : Home sheildroofkoat (or equivalent) Consumption : 0.5 kg/m2 Third coat : HS PU roofkoat (or equivalent) Consumption : 0.8 kg/m2 System buildup-1.5kg/sqm with geotextile of 40 gsm For accessible roof, tiles with scred/ adhesive may be fixed thereafter. Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'GH' on page no. 115 of tender documents as per Sch 'A' Note No 19 Page No 17).

PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) finished even and smooth as in roof padding all as specified and as directed.

Dismantling PVC water tanks exceeding exc 500 ltrs and upto and including 1000Ltr complete all as specified and directed.

S & F 500 ltrs rotational moulded polyethelene water storage tanks (cyclindrical vertical with closed top) incl 20 mm bore PTMT Ball valve high pressure with epoxy coated aluminium rod and high density plastic ball, connecting up pipes securing access covers etc as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position for capacity of water tank exc 500 Ltr and upto and including 1000Ltr.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m depth, for foundation etc or for shafts, manholes, etc not exc 10.00sqm on plan and not exc 1.5m depth and getting out in any type of soil complete all as specified and directed

Returning filling in, including spreading, levelling watering and well ramming in layer not exc 25 cm thick in any type of soil complete all as specified and directed.

Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and as directed.

Demolition and breaking up drain pipes 150mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and as directed.

M & L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate for 150mm dia bore pipes all as per SSR Part-I specifications, complete all as specified and directed.

S&F 150 mm diameter DWCPE (SN8) HDPE Pipes laid in trenches on PCC bed including jointing as per manufacturer's instructions and as directed.(Bedding/ Haunching and earthwork paid separately under respective items of schedule)

M&L for capilary rise treatment of walls as following :- Base coat: Berger HS Latex plus (or equivalent) Consumption base coat: 0.3 kg/m2 Second and Third coat: Latex sheild 2K (or equivalent) Consumption top coat: 3 kg/m2 System requirements: density: 2.00 kg/ltr Compressive strength: 0.5 N/mm2 Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'CD' on page no. 107 of tender documents as per Sch 'A' Note No 19 Page No 17).

M & L for PCC 1:4:8 type D2( 40 mm graded aggregate ) as in sub base to flooring 75 mm thick complete all as specified and directed.

M & L for providing 25mm thick chequered cement concrete tiles of diferent colour & shape( factory made) as per requirement set, jointed and pointed with grey cement and pigments to match colour of tile ,laid over 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Taking down aluminium chowkats with shutters of any size/description including glass panes, rubber packing, snap beading, particle/partition board etc, complete all as specified & directed.

S& F Factory made Solid PVC Moulded Door Shutter with Particle Boarde core, 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. complete all as specified and directed.

M & L for pressed steel frames of size 105mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, necessary welding for fixing of butt hinges of any size/any number, complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately.

S&F 35mm thick 2nd class hard wood (Sal/Hollock), glazed and skeleton shutters (factory made), open rebated and prepared to receive glass or gauge etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I, complete all as specified & directed.

S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm, complete all as specifed & directed.

S&F 20mm dia SS curtain rods in one length per door/window, fancy type (engraved rods), designed & colour as approved by GE, provided with a pair of sideSS Globes and bracket on each end, fixed in repairs, complete all as specified & directed.

S&F 19/20mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber framed work as in cup board shutters, shelves, pelmet box, cabinet etc., fixed in repairs, complete all as specified & directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 40mm, complete all as specified & directed.

S&F 100mm size hasp & staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified & directed.

M&L Non skid coloured glazed ceramic tiles of any shade and any pattern (Pattern consists combination of two or more tiles )300 x 300 x 7 to 8 mm thick, as in floors etc over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in colored cement to match colour of tiles complete all as specified & directed.(The Colour,shade and pattern shall be approved by the GE during execution of work). (No extra cost is allowed for removing and re-fixing and necessary cutting of door etc if any during execution of work)

S&F of Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M&L Granite (of any type) stone slab 18 to 20 mm thick in floors or on cooking platforms etc, set , jointed pointed with grey cement slurry mixed with pigments to match the shade of the slabs including rubbing & polishing laid over and including 15 mm thick screed bed in CM 1: 6 complete all as specified and directed.

Cutting chases for pining in for GI pipe ,condute complete all as specified and directed.

M&L for 15mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors.

S&F 15 mm bore angle stop valve cast copper alloy,CP with capstan heads, fancy type any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S & F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.

M&L for Aluminium anodised frame (for door) of size 101.60mm x 44.45mm made out of 2.01mm thick aluminium section, powder coated, fixed to floor/wall with plugs and screws, complete all as specified & directed.

M&L for Aluminium anodised powder coated door shutter, rails (top, middle and style ) of size 82.53 x 44.45mm and bottom rail of size 114.30 x 44.45mm made out of 1.6mm thick aluminium sheet/section including necessary jointing cleats, glazing clips, rubber packing, mortice lock having six levers, aluminium body hydraulic door closer of suitable size, handles 2 Nos in each shutter, tower bolt, hinges etc., anodised aluminium snap beading screws, complete all as specified & directed. Note : Sheet glass & PVC sheet for panels will be measured and paid for separately under respective item.

M&L for Aluminium anodised powder coated window/ventilator shutter, section of size 44.45 x 44.45mm made out of 1.6mm thick aluminium sheet/section including necessary jointing cleats, glazing clips, rubber packing, suitable handle 1 No in each shutter, tower bolt, hinges 110mm long, anodised aluminium snap beading screws, complete all as specified and directed. Note : Sheet glass will be measured and paid separately under respective item.

M&L for Aluminium anodized three track window shutters consisting of two Nos glazed shutters and one gauzed shutter including, aluminium handle, tower bolt hinges all made of aluminium section, powder coated, of adequate number and size and all member of window of size 44.45mm x 44.45mm (window) and jointing cleats. All aluminium members shall be made out of 1.60mm thick aluminium sheet/section) complete all as specified and directed. Note : Glass panes / wire mesh shall be measured and paid for separately.

M&L for PVC hollow profile 12mm thickness design and pattern as approved / directed at site, complete all as specified and directed.

S & F 5mm thick tinted glass as in aluminium door/ window/ ventilator with aluminium hollow beading/ glazing clip (included with shutters) of size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs/RM including rubber gasket, complete all as specified & directed.

S & F Anodised aluminium powder coated designer grill of 5-6mm dia of mesh size 50x50mm centre to centre with 25mm flat as per sample kept in GEs office including aluminium beading, complete all as specified & directed.

S & F 3mm thick figured glass, pin headed type and glazing with oil putty or wooden beads or glazing pins in squares not exc. 0.5 Sqm in each pane, complete all as specified & directed.

S & F Mild steel galvanised wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks, wire staples or beading etc, complete all as specified & directed.

S & F tubular towel rail brass chromium plated 20 mm Dia with brackets type fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S & F of 1000 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position complete all as specified and directed.

S&F 25mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.

M&L Brickwork using old bricks obtained from demolition straight or curved on plan exc 6 m mean radius built in CM 1:6 as in walls etc. using old bricks obtained from demolition

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of Oil bound distemper over a coat of 3 mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment of Ceiling surfaces including brooming down or steel wire brushing, scrapping down smoke soot , mould, moss and efflorescent salts, trading oil and greasy spots, and applying two coats of oil bound distemper on walls over a coat of plaster of paris putty of minimum thickness 1 mm complete all as specified and directed . Note : The work will be carried out upto tripple storey builing the rate of scafolding is included for this item also.

Excavation in post holes (or similar holes) each not exc. 0.50 Cum, getting out, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance not exc. 50 m and making good surface as in any type of soil complete all as specified and directed.

M & L for providing plain cement concrete, type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

S&F 0.50 mm thck pre parinted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour tensile strength of 550 Mpa as in roof covering , cladding to wall, ridge , gutter etc fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for Steel work as in tubular trusses,bars including special shaped washer etc. omplete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

M & L for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk or screw, including bending and welding angles, as necessary,gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165complete all as specified and directed. (Brackets over 10 kg each to be measured under 'Structural Steel')

M & L for preparation of newly plastered surfaces of wall and aplying 2 coat of cement base paint complete all as specified and directed.

M & L for Hard core of broken stone or boulder of gauge n.exc 63 mm,deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surfaces complete all as specified and directed.

Surface excavation n.exc 30cm deep & averaging 15cm deep & getting out in soft loose soil complete all as specified and directed.

M & L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

M & L for Providing and laying machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Material and labour for complete removal of existing treatment including fascias, cornices etc by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and loose plaster to be completely removed by skilled labour and repair of external wall/ chajjas to be done with repair mortar to get even surface including preparation of old surface of wall/ ceiling by filling cracks by Berger Bison Putty/ crack fill paste of Berger Paints or equivalent make and make good smoothen surfae by sand paper and applying two coats of premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance of Berger Paints Ltd or equivalent of other approved make with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.9 ltr (undiluted)/10 sqm mtrs diluted with water in 1:1 ratio as per manufacture's instruction and all coats incl primer to be applied with fuly automatic airless spray machine of paint appliaction with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI all as specified and directed. Allow 6-8 hrs to dry the surrface in subsequent coats of paint and including necessary scaffolding at any height complete all as specified and directed Make : Berger Paints Weathercoat Long Life Flexo/ Nerolac Paints excel Total/ Asian Paint Apex Ultima/ JK Maximo Ultra Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'AB' on page no. 103 of tender documents as per Sch 'A' Note No 19 Page No 17).

E/M Portion

Taking out carefully copper/aluminium point wiring,Light,fan,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete

Taking down distribution boards/wooden board ,switch fuse units,steel enclosures for MCB of any type and removing from site all as specified and as directed by the Engineer in charge.

Taking down existing unserviceable submain wiring any size and making good the disturbed surface all as specified and as directed.

Material and labour for point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface complete all as specified and as directed.

All as per item No 145 above but for one fan point controlled by one piano switchcomplete all as specified and as directed.

All as per item no 145 above but for one bell point controled by one bell push complete all as specified and as directed.

All as per ser item No 145 hereinbefore but for one 3 pin socket outlet 5 Amp Same complete all as specified and as directed.

All as per ser item No 145 hereinbefore but for one 3 pin socket outlet 5 Amp independent.

All as per Item no 145 here-in-before but for one15 Amp 3pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and as directed.

Supply and fix of Switch piano flush type single pole, one way 5 Amp ,complete all as specified and as directed.

Supply and fix of Switch socket out let combination universal type, 2 in 1, 2 and 3 pin 5 Amp, piano flush type, 240 volts, complete all as specified and as directed.

Supply and fix of Switch socket outlet combination universal type, 2 in 1, 3 pin 5 and 15 Amp, piano flush type, 240 volts, complete all as specified and as directed.

Supply and fix of Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.

Supply and fix Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings , complete all as specified and as directed.

S & F Electronic fan regulator stepped type,two module with five step 240 volts,100Watt suitable for 1200/1400 mm sweep AC ceiling fan complete, all as directed.

Supply and fix of Bell push flush type piano 5 Amp complete, complete all as specified and as directed.

Supply and fix Bell multi music 230 volt ,AC single polecomplete all as specified and as directed.

Supply and fix of Tube light fitting integrated type suitable for LED 20W indoor decorative aluminium extruded T5 LED batten complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed.

Supply and fix factory made epoxy powder coated Distribution board TPN 4 ways ,415 Volts with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing complete all as specified and confirming to IS : 8623.

Supply and fix factory made epoxy powder coated Distribution board SPN 8 ways (SPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing complete all as specified and confirming to IS : 8623.

Supply and fix MCB SP-06 to 32 Amp,10KA, 240 volts complete complete all as specified and as directed.

Supply and fix in replacement of MCB SPN 40 Amp, 240 volts 50Hz AC supply, complete all as specified and as directed.

S&F MCB SPN 63 Amps 240 Volts, B Curve 240 volts 50Hz AC supply, complete all as specified and as directed.

S & F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 25 KA , complete all as specified and as directed.

Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 4 sqmm and one single core PVC insulated (unsheathed) solid copper conductor FRLS cable of size 4 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement moter 1:3 and making good disturbed surface complete all as specified and as directed.

Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm and one single core PVC insulated (unsheathed) solid copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement moter 1:3 and making good disturbed surface complete all as specified and as directed.

M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to GI earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dia and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) and pouring extra Clay Soil of qty not less than one cubic meter into the earth pit and also removal of excavated soil not less than 50 mtr from the earthing place all as specified and directed and tested on completion. including testing complete all as specified and as directed.

Supply and fix in repairs factory made epoxy powder coated Distribution board SPN 4 ways (SPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing complete all as specified and confirming to IS : 8623, complete all as specified and as directed.

M & L for taking down exhaust fan 300/450 mm sweep complete cleaning the grease oil etc spray painting with 2 coats of synthetic emamelled paint over a coat of primer including replacement of bearing, capacitor, cotton pin, rubber coal, MS nuts bolts washer, connector prewired from connector from connector to ceiling rose with twin core flexible copper conductor cable 24/0.02 refixing in position connecting testing etc complete all as specified and directed.

Supply and fixing LED Bldg security light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with suitable size and length of 1.5 sqmm copper conductor with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

M & L for taking down ceiling fan 1200 mm sweep complete cleaning the grease oil etc spray painting with 2 coats of synthetic emamelled paint over a coat of primer including replacement of bearing, capacitor, cotton pin, rubber coal, MS nuts bolts washer, connector prewired from connector from connector to ceiling rose with twin core flexible copper conductor cable 24/0.02 refixing in position connecting testing etc complete all as specified and directed.

S&F GI Tubing medium grade 25 mm dia with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and directed.

S&F 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed.

Excavation in trenches, n. exc1.5 m wide and n. exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 sq m on plan and n. exc1.5 m in depth and getting out in soft / loose soil complete all as specified and as directed.

Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5m above from the starting point complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed.

Cutting existing GI/CI/DI water mains of dia 100/150 mm for alterations or additions (Each Cut measured) and screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to from connector all as specified and directed by Engr-in-Charge.

M/S Shiv Enterprises (BID ID -3436577)

S R CONSTRUCTIONS (BID ID -3436562)

AKSHAY CONSTRUCTION COMPANY (BID ID -3435337)

M/S VED PAUL MAHAJAN (BID ID -3437395)

GENESIS INDIA (BID ID -3441246)