REPAIR TO CHAJJA, ROOF PROJECTION, FACIA PLINTH PROTECTION, PLASTERING INCL EXTERNAL PAINTING TO SINGLE LIVING BILLETS AND OTHER OTM ACCN IN DOMESTIC AREA AT AIR FORCE STATION UTARLAI

M& L for chipping of slab/columns/beams/chajjas/parapet/roof projection and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minium of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brush & appliying Fosroc Reebaklens RR rust rust remover or equivalent in two coats over rusted reinforcement surface and providing anti corrosive coating with two component epoxt based zinc rich primer/Rust passivation Inhibitor coat at the rate of 5 sqm/Ltr with Fosroc Nitozinc primer or equivalent to reinforcement surface as per manufacturers instructions including all scaffolding ,machinery,tools tackels and men materials and clearing of debries complete all as specified and as directed by Engr-in-charge. Make: Reebaklens RR rust rust remover, Nitozinc primer of Fosroc or equivalent in Dr Fixit/ACC/L&T/STP/Sika India /Asian paints/bostik/Choksey chemicals/Thermax limited/ Hindcon Chemicals . (Note : The work shall be carried out upto 12.00M height and through approved company authorised applicator)

M & L for applying bond coat on the prepared old surface of concrete/masonry to receive new polymer mortar/polymer modified martar or micro concrete with two coats of Fosroc Nitobond SBR or equivalent in Dr Fixit/STP/Bostik/Sika/Choksey chemicals/Thermax ltd/ CICO as per maufacturer specifications. Laying of reinstatement polymer mortar or micro concrete shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete. Item rate inclusive of all materials, labors, supervision, tools, tackles, transportation, fixing etc including taking down existing plaster/any type of treatment including all scaffolding ,machinery,tools tackels and men materials and clearing of debries complete as per specification and as directed. MAKE: Fosroc Nitobond SBR or equivalent in Dr Fixit/STP/Bostik /Sika India/ Choksey chemicals/Thermax ltd/ BASF/Asian paints/Hindcon Chemicals. Complete all as specified and directed by Engineer-in-Charge. Note : The work shall be carried out through approved company authorised applicator and upto 12m height.

M&L TMT bars 6mm to 8mm dia bar , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diameter including all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge. (Note : The work shall be carried out upto 12.0M height)

M&L driiling holes with 10 mm to 20mm dia and 75 to 100mm deep as required and filling the holes after inserting of reinforcement dia 8 to 16mm for anchoring at ends/shear connector and filled the holes with two component polyester resin anchoring grout (two pack system consist of 1 part of resin and 2 hardner part) hole with Fosroc Lokfix E55 S / E45T @ 150gm per holes with all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge. Make: Fosroc Lokfix E55 S / E45T or equivalent in Dr Fixit/STP/Seika/ bostik/Choksey chemicals/ Thermax ltd / BASF/Asian paints/Hindcon Chemicals/Hilti . Note : 1.reinforcement shall be paid and measured separately. 2. The work shall be carried out through approved company authorised applicator & upto 12m height.

M & L for perparation the surface and applying 40mm thick in layers ,each layer n.exc 20mm thick with polymer modifed mortar (PMM) on sufcace of slab/columns/beams/chajjas/ parapet /roof projection/balcony/staircase with Fosroc Renderoc SP40 or equivalent in Dr Fixit/STP/Asian paints / Sika / Bostik/CICO/Choksey chemicals/ Thermax ltd/Hindcon chemicals including all necessary scaffolding, man and material Complete all as specified and directed by Engineer-in-Charge. . Note : The work shall be carried out through approved company authorised applicator & upto 12m height.

M & L for 10mm thick cement plaster CM 1:3 with added intigral waterproofing compound including preparation on new plaster surface & applying two coat of cement base paint over one coat of primer. Fosroc Conplast WL Extra or equivalent in Dr Fixit/ACC/ L&T/STP/Bostik/Sika/ CICO/Choksey chemicals/ Thermax ltd as per manufacturer instruction including all scaffolding ,machinery,tools tackels and men materials and clearing of debries. Note : The work shall be carried out through approved company authorised applicator and upto 12.0M height Complete all as specified and directed by Engineer-in-Charge. . (WPC will be measured & paid seperately)

M&L preparation of old distempered wall surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and effloescent salts and trading oil and greasy spots and applying a coat of distemper oil emulsion any tinted over one coat of wall care putty. Complete all as specified and directed by Engineer-in-Charge.

M&L for preparation on old plaster surface of ceiling & applying one coat of white wash up to 12 mtr height of bldg. Complete as specified and directed by Engr-in-charge.

M&L for preparation on old plaster surface of walls & applying one coat of cement base paint up to 12 mtr height of bldg.Complete as specified and directed by Engr-in-charge.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, Complete all as specified and directed by Engineer-in-Charge.