SUPPLY and FIXING NEW EXTERNAL WINDOWS Gr. FLOOR AFTER ROMOVING OLD WINDOW AT VIDHAN SABHA, LUCKNOW

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below (DSR : 15.13.1)

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : (DSR : 15.14.1)

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

Providing,& fixing first-class Sal wood frame (chaukhat) of approved quality, size, and section, including planning, dressing, rebating, grooving, mortise cutting, fitting, and fixing in position works, complete in all respects as per approved drawings, specifications, and directions of the Engineer-in-Charge. The rate shall include, tools, & labour required for satisfactory completion of the work

Providing First class teak wood window Shutters (Design 'A') as per Drawing & specification etc all as per direction of Architect In-charge. (AR)

Providing and fixing approved make tinted glass of specified thickness (5 mm or as specified), manufactured in accordance with relevant IS standards, cleaning and finishing complete in all respects, as per the approved shop drawings, manufacturer's specifications and the directions of the Engineer-in-Charge.

Providing and applying PU polish on window . This includes preparing the surfaces with IKEA base and sealing compound, followed by thorough scraping and rescraping to ensure a smooth base. The process involves sanding and applying the base coat three times before the final paint. The finish must be approved by the Architect-in-Charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR : 13.80)

Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). (DSR : 9.53)

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 75x65x4 mm (heavy type) (DSR : 9.72.5)