Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
Closing Date
26 Oct 2026, 11:00 am
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
60 days
Expenditure
General
83
3 conditions
I/We engage to supply the Western Railway with the articles specified above upon the terms of the Indian Railway Standard Condition of Contract latest revision and upon the terms of the Revised Special Conditions and Instructions for the guidance of the Contractors issued by the Western Railway S/137/F Revised May 2011 - Amendment No.3 of June 2016.
Railways reserves the rights to place order for entire / bulk quantity on firms who have successfully supplied same/similar items to any Railway/ PUs for which documentary evidence must be furnished along with their offer evidencing execution of such the purchase orders
Firm should submit authorization certificate from OEM.
21 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Earnest Money Deposit (EMD): (1) EMD shall be submitted by tenderer as specified in tender schedule, along with their online offer. There shall be no exemption from submission of EMD for any tender or by any tenderer except those exempted. (2) Exemption to submit EMD will be given in the following cases : (a) Micro and Small Enterprises (MSEs) against UDYAM certification. (b) Other Railways and Government Departments. (c) Vendors registered with Railways for the trade group of the item tendered.
SECURITY DEPOSIT (SD): 1. All successful tenderer shall deposit Security Deposit (SD) amount @5% of contract value rounded off to nearest higher Rs.10,subject to maximum Rs. 50 lakh for contract value upto Rs 50 Cr. In case of contract value above Rs 50 Cr. SDwill be Rs 1 Cr.2.There shall be no exemption from submission of Security Deposit (SD) for any tender or by any tenderer except following:i. The Contract value up to Rs.25(twenty-five) lakh.ii. Other Railways and Government Departments.iii. PSUs owned by Ministry of Railways and PSUs for the group of items that are manufactured by them.iv. In tenders issued against PAC,OEM in whose favour PAC has been issued.v.Vendors registered with Railways for the trade group of the item tendered for orders valued up to their monetary limit of registration.vi. Vendors appearing on theapproved vendor lists of RDSO/PUs/CORE, subject to approval status being valid on the date of tender closing.
1 location across Rajasthan · 20 Set total
SPANNER & Digital Torque Wrench,
83266983~WR
83266983
Open - Indigenous
Goods
Chittorgarh, Rajasthan
₹0
Exempted
1 Oct 2026
1 Oct 2026
5 items · 20 Set total
High Quality chrome plated DOUBLE ENDED SPANNER (OPEN) SET CONSISTING OF 13 PIECE I N EACH SET SIZES (6X7, 8X9, 10X11,12X13, 14X15, 16X17,18X19, 20X22, 21X23, 24X27, 25X28, 30X32 an d 42x46 mm) confirming to IS 20028-2004 ALONG WITH Prefer MAKE: Taparia/ Bosch/Stanley/Ridgid or Simi lar. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SENIOR SECTION ENGINEER (C&W) CHITTORGARH, WR | Rajasthan | 10.00 Set |
| Total | 10 Set | |
Supply of Adjustable Interchangeable Digital Torque Wrench, Range-80-400 NM, made in Sing le Piece of Aluminium Alloy Body with Accessories. Item description & Quantity in 01 Set as per Annexure.'A '. Preferred Make. Gedore, Britool, Armstrong or Similar. Calibration certificate traceable up to NABL should be attached along with supply. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SENIOR SECTION ENGINEER (C&W) CHITTORGARH, WR | Rajasthan | 2.00 Set |
| Total | 2 Set | |
A set consisting of double Chrome plated Bi - Hexagonal Double ended Ring Spanner confor ming to IS : 2029/1998 1 set required 13 ring spanners sizes given as follows: 6x7 mm, 8x9 mm, 10x11 m m, 12x13 mm,14x15 mm, 16x17 mm, 18x19 mm, 20x21 mm, 21x22 mm, 24x27 mm, 30x32 mm, 34x36 m m, 41x46 mm preferred make : Taparia/ Bosch/Stanley/Ridgid or Similar. [ Warranty Period: 30 Months af ter the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SENIOR SECTION ENGINEER (C&W) CHITTORGARH, WR | Rajasthan | 4.00 Set |
| Total | 4 Set | |
Set of Pipe wrench consist of 04 pieces of sizes : 300 mm, 350 mm, 450 mm, 600 mm - each 01 no., per set., Preferred make : Bosch, Stanley or Taparia or Similar. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SENIOR SECTION ENGINEER (C&W) CHITTORGARH, WR | Rajasthan | 2.00 Set |
| Total | 2 Set | |
Box Spanner Set ( as per IS 6131:1980) with accessories for 1/2 inch square drive up to 32 m m having sizes 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 26, 27, 28, 29, 30, 32 MM wit h 125 and 250 mm extension bar socket for 1/2 inch square drive, 300 MM T-handle for 1/2 inch square driv e, Universal joint double sided specialty for 1/2 inch square drive & 1/2" square drive reversible ratchet wit h case. Preferred Make: Taparia/ Eastmen/ Jhalani /Everest or similar. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SENIOR SECTION ENGINEER (C&W) CHITTORGARH, WR | Rajasthan | 2.00 Set |
| Total | 2 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
spechtorque.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .