Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹30.1 LAccepted-AOC 60 310A 3 KHERIA MOD JAGNER ROAD AGRA 01 | AGRA | UTTAR PRADESH | 282001 | 1 | Accepted-AOC Due to L-1 and credit | |
| 2 | 2₹31.7 L+₹61,964.75 (2.00%)Rejected-Finance 59 100 AJIT NAGAR GATE KHERIA AGRA 282008 | AGRA | AGRA | UTTAR PRADESH | 282008 | 2 | Rejected-Finance Being other than L-1 | |
| 3 | 3₹32.7 L+₹1.7 L (5.41%)Rejected-Finance VILL NANDA KA NAGLA DHAOLI AGRA 282001 | AGRA | AGRA | UTTAR PRADESH | 282001 | 3 | Rejected-Finance Being other than L-1 | |
| 4 | 4₹32.9 L+₹1.9 L (6.09%)Rejected-Finance C 89 CECC VILL POST PATHOLI AGRA UP | AGRA | AGRA | UTTAR PRADESH | 283105 | 4 | Rejected-Finance Being other than L-1 | |
| 5 | 5₹33.9 L+₹2.9 L (9.19%)Rejected-Finance DADAWA KURIYAR KHAS BASTI BASTI UTTAR PRADESH 272178 | BASTI | UTTAR PRADESH | 272178 | 5 | Rejected-Finance Being other than L-1 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
22 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) ADM AREA AGRA
GE (AF) ADM AREA AGRA
REPAIR , REPLACEMENT TO JOINERY AND OTHER CONNETCED WORKS UNDER AGE BR-I OF GE(AF) ADM AREA AT AF STN AGRA.
2024_MES_661916_1
8000-2158/E8
Open Tender
Civil Works - Highways
Item Rate
180 days
GE (AF) ADM AREA AGRA
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
GE (AF) ADM AREA AGRA
₹70,000
Yes
18 Sept 2024
25 Jun 2024
24 Jul 2024
25 Jun 2024
22 Jul 2024
9 Jul 2024
Amount
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 sqm each complete all as specified and directed.
S&F solid PVC door frames of size 50mm x 47mm made out of 5mm single side prelaminated PVC sheet and edges will be painted to match with prelaminated sheet reinforced with MS square tube complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either toside and as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in M.S frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement. Supplying and fixing in the frame at site as specified of drawing all as specified and directed..
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing, serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for glazed ceramic designed coloured tiles size 450x350x7 mm thick/350x250x7 mm thick on vertical surface such as dado/skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured over rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4) as in backing coat of tiling complete all as specified and directed.
Taking down chowkats with shutters (without taking down of shutter from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and directed.
Taking down shutter of any description exc 1.00 Sqm and n.exc 2 Sqm each complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F in repair framed work as in doors chowkhats or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe-290 (Gde E165) complete all as specified and directed.
M&L for Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
S&F Pressed steel frames 125x60mm made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and directed.
S&F Pressed steel frames 105x60mm made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and directed.
M&L PCC (1:2:4) type C0 using 12.50 mm graded aggregate as infilling in pressed steel Chowkhats complete all as specified and directed.
S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F solid WPC door frames of size 100mm x 50 mm single rebate made out of solid WPC with standard Grade Density 780 Kg/CBM single side prelaminated PVC sheet and edges will be painted to match with prelaminated sheet complete all as specified and directed.
S&F for Factory Made Solid PVC Moulded door Shutter,with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.
S&F for vertical Blinds made of glass fibre fabrics in width 5” (or 4”). Minimum overlapping of ¾” in fabric. Top aluminium anodized rail of 1.4 mm thickness. 2 inch wide channel with front lamination of same fabric. Runners having stainless steel hooks with built-in shock spring and self aligning slip clutch. End control box composed of double gear system. Stainless steel spacers. Botton weight fully plastic covered linked with plastic bead chain, complete all as specified and directed. Note: Colour and design, make shall be approved by GE.
S&F 35mm thick skelton/gauzed shutter factory make open rebated and prepared to receive glass gauged etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed.
S&F 100 mm size butt hinges stainless steel medium weight complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F 150mm size aluminium anodised alloy handles fabricated type complete all as specified and directed.
S&F 300mm long mild steel, sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts sliding bolt not less than 16mm dia of shoot/bolt of extruded section complete all as specified and directed.
Taking down shutter of any description each not exceeding 1Sqm each complete all as specified and directed.
Supply and fix well-seasoned second class hard wood plain, solid, straight Chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S&F 2nd class hard wood 30 mm thick glazed and skeleton shutters for windows/ventilators, open rebated and prepared to receive glass, gauge, divided in to square, with plain chamfered or rounded, mitered and rebated sash bars any number etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc,sizes of members of shutters as specified in SSR part I, Section 8, clause 8.24 (b),fitted to chowkat complete all as specified and directed.
S&F MS hold fast and similar article conforming to Fe-290 Gde-E-165-0 or Fe-310-o all as specified and directed.
S&F stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specifed and directed. (Note :- Quoted rates shall be deemed to include the cost of any type of beading required for fixing the wire mesh etc.)
S&F plain sheet glass 3mm thick , ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each complete all as specified and directed.
S&F 75 mm size butt hinges stainless steel medium weight complete all as specified and directed complete all as specified and directed.
S&F 100 mm long aluminium handles cast type anodised complete all as specified and directed.
S&F 125mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed..
S&F in repairs 3mm thick sheet glass , ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane including removing/ hacking out old broken glass wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F in repair tainless Steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples for steel windows all as specified and directed. (Note :- Quoted rates shall be deemed to include the cost of any type of beading required for fixing the wire mesh etc.)
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint including one coat of red oxide complete all as specified and directed.
S & F for box type Steel windows / ventilators with pressed steel frame made out of 1.25 mm thick steel having two rebate with glazed shutters and fly proofing shutters including guard bars, 75 mm thick hinges, 150 mm tower bolt, 150 mm handle and locking arrangements etc complete all as specified and shown in drg CE/Ald/TD-172 sheet 1/2 & 2/2.
M&L for PCC (1:3:6) type B-0 with using 12.5 mm graded stone aggregated as in cill, step and for inserting hold fast of doors and windows all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint including one coat of red oxide complete all as specified and directed.
S&F in repair stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets and finials fency type, stops fixed with ss screws etc complete all as specified and directed. Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.
Taking down cement plaster on brick wall including racking out joints, hacking for key, scrrubing down with water etc complete all as specified and directed.
M&L for 10mm thick cement plaster in CM (1:6) on fair faces of brick work finished even and smooth without using extra cement complete all as specified and directed.
M & L for rendering in cement plaster in 15 mm thick on other than fair faces of brick work , cement finished even & fair in CM 1:4 complete all as specified and directed.
M&L for two coat of oil bound distemper after preparation of new plastered surfaces of wall over a coat of clear cholle primer and including 1mm thick wall care putty complete all as specified and directed.
M&L for preparing old decorated surface of walls and applying two coat of cement base paint including prepration of surfaces complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint including one coat of red oxide complete all as specified and directed.
M&L for 12 mm thick frosted glass, cut to size, width n,exc 1.8 RM and height n,exc 2.1 RM of each panel, homogenious colour fixed in frames including necessary fittings, fixtures, brackets and accessories as required and removing old glass of any description complete all as specified and directed.
S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified and directed.
S & F powder coated anodised aluminium window and ventilator shutter, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screw, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified (Top / Bottom 20736=0.547kg/Rm complete all as specified and directed.
S & F 4 mm thick sheet glass ordinary quality and glazing complete with beads fixed with screws in square n exc 0.5sqm in each pane complete all as specified and directed.
M&L for resecuring or easing & adjusting Shutters of any description or any size each (without taking down shutters) complete all as specified and directed.
M&L for refixing the Shutters of any description or any size each in the same opening incl reneval of builders hardware, screws etc complete all as specified and as directed.
S&F in repairs 100 mm size butt hinges stainless steel medium weight complete all as specified and directed.
S&F in repairs 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F in repairs 150mm size aluminium anodised alloy handles fabricated type complete all as specified and directed.
S&F in repairs Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F solid WPC door frames of size 62 mm x 32 mm single rebate made out of solid WPC with standard Grade Density 780 Kg/CBM single side prelaminated PVC sheet and edges will be painted to match with prelaminated sheet for cupboard etc complete all as specified and directed.
S&F factory made pre-laminated PVC solid board 18-20 mm thick prelaminated on both sides with wooden finished on one side and white finished lamination on other side as in cup-board front shutters complete fixed in position in all respect all as specified and directed.
S & F Continuous (piano) hinges, mild steel, bright finish or elec trogalvanised ( width of flaps 40 mm when open in mm) complete all as specified and directed.
S&F Stainless Steel (304 Grade) Finished Handles 150 mm with stainless steel screws complete all as specified and directed.
S&F Stainless steel tower bolt of 100mm size for kitchen cabinet and bed room cupboard shutter complete all as specified and directed.
S&F Hasp and staple 100 mm wide, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F Stainless magnatic catcher of approved quality in cupboard and kitchen cabinet including fixing with necessary screws double strips(horizontal type complete all as specified and directed.
S&F for Solid PVC Wall Lining consisting of 5mm thick coloured PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including taking down of existing wall panelling complete all as specified and directed.
S&F for 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per manufacturers instruction, specification including taking down of existing wall panelling complete all as specified and directed.
deva engineers (BID ID -3061267)
GIRENDRA SINGH AND CO (BID ID -3061447)
C P Singh and Co (BID ID -3071019)
Abhi Construction (BID ID -3069988)
M/s M S Sharma and Co. (BID ID -3062150)
stage.html
html • 0.05 MB
tech_bid_open.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .