SPECIAL REPAIR TO ROOFING OF BLDG NO. NP 27, T-7,T-5, NP-21, NP-22, NP-125,T-56,T-60 AND T-61 AT BHADORIYA AND DHANGU COMPLEX, SPECIAL REPAIR TO 06 TOILET BLOCKS OF 167 MH LAB-03 (NP-02), FWC-01 (NP-02), ICU-01 (NP-03), MAIN OFFICE (T-03), ADDN/ALTN

Amount

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs in depth in foundation, for laying of cables, pipes etc. and getting out in any type of soil complete all as specified and directed.

Removing surplus excavated material from site to a distance exceeding 100m but not exceeding 200 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm broken graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M & L for reinforced cement concrete M-25 (Design Mix) (using 20 mm aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed

M & L for reinforced cement concrete M-25 (Design Mix) (using 20 mm aggregate) in columns, pillars, piers, posts and struts, complete all as specified and directed

M & L for reinforced cement concrete M-25 (Design Mix) (using 20 mm aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed

M&L Formwork to sides of Rough finished flat surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and directed

M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surfaces of concrete, square, rectangular or polygonal, complete all as specified and directed

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), Rough finished surfaces of concrete, Flat surface, , complete all as specified and directed

M&L Formwork to sides and soffits of rough finished flat surfaces of concrete i.e. floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and directed

M&L Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L TMT bars 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including bending, cranking etc. and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed.

M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.

M&L for two coats of cement base paint over a coat of primer over prepared surface of wall , complete all as specified and directed.

M&L for hard core broken stone of gauge n.exc 63 mm deposited , spread and levelled in layers n.exc 15 cm thick, watered rammed to a true surface complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in sub base of floors to receive topping layer complete all as specified and directed.

M&L for providing glazed ceramic coloured wall tiles of size 450mmx350mmx7mm thick, set, jointed in colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M&L for Non skid ceramic colour tiles 7 to 8 mm thick (sq/ rect) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S&F steel window/ventilator with tubular frame factory made of size 79mm x 39mm, 16 gauge rectangular tubular frame with side hung shutter both for glazed and wire gauge with glazing bars 12x3mm flat iron incl projecting type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, including two coats of synthetic enamel paint over one coat of red oxide primer all as specified & as shown on drg No CEPZ/TD-245/01 and 246/02 sheet ½ & 2/2 (excluding glass & wire gauge).

M&L for 75mm thick PCC, type C-2, 1:3:6, ( using 40mm graded crushed stone aggregate) as in plinth protection finishing the surface even and smooth without using extra cement complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet used instead of Plain colour PVC sheet and edges will be painted to match with prelam sheet reinforced with MS Square tube, supplying & fixing in opening as per specification and drawing. Note : Door frame shall be water proof, termite proof, elegant and should have excellent screw holding strength to fix hinges and hold doors properly for long life)

S&F Factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles) with 5 mm thick moulded prelam PVC sheet on the front face and 5 mm prelam PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each panes including glass pin, complete all as specified and directed.

S&F galvanized mild steel wire cloths 0.46mm nominal dia and average width of aperture 1.18mm & fixed with tint tacks or galvanized wire staples complete all as specified and directed.

S&F 15mm bore GI tubing medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, complete all as specified and directed.

S&F GI tube 20mm bore medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

S&F 15mm bore Angle valve, cast copper alloy fancy type chromium plated ISI marked with crutch or butter fly handle high pressure screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F bib taps, long body fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore, complete all as specified and directed.

S&F 10 litres PVC low level flushing cistern (white colour) syphonic action type with inlet ball valve float and push type handle including bracket, PVC 32mm dia flush pipe with coupling and fixed complete all as specified and directed.

S&F 75mm bore PVC floor trap with grating complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction double, (double T equal or unequal) complete all as specified and directed.

S&F mild steel, chromium plated Soap Dish fixed with and incl CP screws all as specified and directed.

S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and including PTMT valve 20mm high pressure with polyethylene float and fly nuts, complete all as specified and directed.

S&F vitreous china wash hand basin oval shape any size including cutting for and pining in ends of brackets or erecting stand, waste coupling and PVC waste pipe, 32mm dia to be fixed in MS brackets complete all as specified.

S&F of 75mm PVC (SWR) drain pipes 75 mm bore single socketed in any length with rubber ring joint fixed to walls complete all as specified and as directed.

S&F Vitreous China wash down water closet pan (Pedestal pattern) including P or S trap, fixing bolts & connecting to drain pipe including plastic seat cover with flat bottom cover and mild steel chromium plated hinging device and connection to flush pipe, anti symphonic pipe complete, all as specified and directed.

S&F Hand Shower (Health Faucet) with 15mm dia,1.25 m long Flexible Tube Chrome Finish & Wall Hook for Water closet complete all as specified and directed.

M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like fixed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. Note:- The rate included for making gas pipe holes 25mm dia with rounded holes and all open edges to be half rounded.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified.

S&F pillar tap, cast copper alloy, chromium plated, fancy type with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.

S&F stop valve 15 mm dia cast copper alloy fancy type, chromium plated with long shank and cup (concealed type) screwed on high pressure with crutch or butterfly handle screwed bolts ends, for iron pipe or for union and fixed complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

S&F brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), complete all as specified and directed.

S&F Toilet paper holder with flat recessed type stainless steel including CP screws all as specified and directed.

S&F of 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F of 75mm bore PVC (SWR) reducers complete all as specified and directed.

M&L for septic tank for 10 users designated to carry sewage and sludge water, including excavation in any type of soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete all as specified, shown on drawings and directed.

S&F of 150 mm dia RCC NP2 pipe laid and jointed complete including providing 100 mm thick cement concrete (1:4:8) type D-2 using 40mm graded crushed stone agg as in bed for pipes incl packing under and huaunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Surface dressing n. exc 15 cm deep in any type of soil, complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

S&F machine pressed precast concrete interlocking paver blocks with grey cement and no pigment, any shape and size conforming to IS 15658:2006 of 60 mm thickness M35 grade complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in coping, benching, PCC, block for hold fast including all necessary from work complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

Excavation in post holes not exceeding 0.50cum getting out in Hard/dense soil, returning, filling in layers not exceeding 50 mtr and making good surfaces complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in flooring, PCC path, ramps, hard standing, or as in similar work finished even and fair without using extra cement including necessary formwork where required complete all as specified and as directed.

M&L for reinforced cement concrete Type B1 1:2:4 using 20 mm aggregate in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified.

M&L for reinforced cement concrete (Nominal Mix) Type B1 1:2:4 using 20 mm aggregate in columns, pillars, piers, posts and struts.

M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement and curing the surface, complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying min 1.0mm thick wall care putty on the surfaces and making surface smooth and applying one coat of primer (as per manufacturer's recommendations) on the surfaces and applying two coats of distemper oil emulsion without any brush marks on the surface in any tint as approved by Engr in charge all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and directed.

S & F powder coated Anodised aluminium frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc. with Powder Coating (minimum thickness of powder coating 50 micron & min weight of member not less than 0.55 kg/Rm), complete all as specified and directed.

S & F Powder coated Anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including powder coating of any colour (Thickness or powder coating not less than 50 micron), complete all as specified and directed.

S&F Powder coated Anodised aluminium (min. thickness of power coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (2 no. minm), minm 3 nos aluminium tower bolt 75 mm long, aluminium handle 2nos 125mm, hinges type B-21 100mm long (2 no.) complete all as specified and directed.

S&F 5 mm thick tinted glass in door/window shutters with aluminium beading/glazing clip of both side complete all as specified and directed.

S& F for aluminium mortice lock, vertical tyle 75mm size of 4 lever all as specified and as directed by Engineer in Charge.

S&F floor door stopper of overall length of cover plate 140mm or 150mm aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F aluminium (die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

S&F solid PVC Wall lining consisting of 5mm thick prelam PVC sheet inclusive of solvent cement and fixing at site on pvc frame as per specifications and drawings complete all as specified as directed.

S&F 5mm thick PVC sheet fillets of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified as directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling including cornices plasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc. and applying two coats of oil bound distemper on ceiling, complete all as specified and directed.

M&L for cutting opening through brick wall for doors, window and other openings or enlarging existing openings, converting windows into door etc. or cutting out for defective brickwork including making plastering the damaged surface & making good and cleaning and stacking bricks, removing surplus serviceable bricks etc. to store and removing the rubbish not exceeding 50m complete all as specified as directed.

M&L for vitrified 10 mm thick ( sq/ rect) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and directed.

M&L for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240, complete all as specified and directed.

M&L steel work in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) Forming holes with riveted, bolted, or welded attachments, complete all as specified and directed.

S&F Prepainted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws, complete all as specified and directed.

S&F pre painted galvalume aluminum zinc coated GI based plain steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws, complete all as specified and directed.

Preparing the new steel surfaces of any description over 10cm width or girth priming with red oxide zinc chrome and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for Non abrasive paving (rectified endura) cement concrete coloured tiles 300x300mmx10mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15mm thick screed bed in cement mortar 1:4 including demolition/ dismantling old surface/tiles, complete all as specified and directed.

M&L 75mm thick plain cement concrete type D-2 1:4:8 as in Sub base/sub floor in tiles/blocks complete all as spd and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in copings, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed

Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings, complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section inc old wooden trusses, purlins, rafter of any description complete all as specified and directed.

Dismantling of timber scantlings as in fillets, rails posts, rafters, purlins, etc. under 40 sq cm in section in un-framed work complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulations, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Providing and fixing tiled false ceiling of size 595x595 mm incl of ceiling tiles in true horizontal level suspended on inter locking matrix 32 mm metal grid of hot dipped galvanized steel sections (galvanized @120gms per sqm both side incl) consisting of 3600mm long main "T" of size 24x25mm and 0.30mm thick and PPGI sheet wall angle of size 24x24mm and 0.40mm thick. Bottom exposed capping of width 24mm of all T sections shell be 0.25mm thick. PPGI wall angle is fixed align the perimeter of ceilings to walls, partition or columns etc. with rawl plug and wooden screws at 300mm denters. Main T runners are than suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12mm dia and 38mm long dash fasteners, 6 mm threaded rod with bolt for hanging arrangement of ceiling at max 1200 mm center to center along main T and not more than 150mm with slipped joints, the last hanger at the end of each main runner should not be greater than 600mm from adjacent wall. than 1200mm long cross T is interlocked between the main T at 600 mm center to center to form at grid 1200x600mm and than secondary cross of length 600mm is interlocked at middle of 1200x600mm grid to form grids of 600mmx600mm . cross T at the ends having length more than 600mm are to be supported independently. Finally PVC laminated with aluminium foil back board tiles of size 600x600x7 to 8mm thick tiles having light refectors of >=75% are placed in the grid.

Demolition of brick work or stone/ boulder masonry/ precast block walling built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

M&L for brick work in cement mortar 1:4 of old size sub class ‘B' bricks straight or curved on plan exceeding 6mtr mean radius, complete all as specified and directed.

All as per description of serial item No. 89 here-in-above but except bricks complete all as specified and directed

Taking down chowkat or frame with shutter (without taking off shutter from the frame) not exceeding 1.50 Sqm each including taking out hold fast embedded in PCC, complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 Sqm and n.exc 4 Sqm each, complete all as specified and directed.

Taking down shutters of any description not exc 1.00 Sqm each, complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other frame/Chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properly of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length, complete all as specified and directed.

S&F Factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles) with 5 mm thick moulded prelam PVC sheet on the front face and 5 mm prelam PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 150mm long aluminium, anodized barrel tower bolts of extruded section ISI marked, complete all as specified and directed.

S&F 150mm extruded aluminium alloy handle fabricated anodized ISI marked, complete all as specified and directed.

S&F 100mm long butt hinges medium weight cold rolled ISI marked mild steel complete all as specified and directed including necessary welding if required .

S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

S&F Vitreous china urinal half stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal in back in cement; fixing automatic cistern with brackets, flush pipe, grating and union for discharge pipe, complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and including PTMT valve 20mm high pressure with polyethylene float and fly nuts including dismantling water tanks (capacity of tank exc. 250 ltr but n. exc. 500 ltr) and removing from site complete all as specified and directed.

M&L for providing glazed ceramic coloured wall tiles of size 450mmx350mmx7mm thick, set, jointed in colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:4 including dismantling of wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to a store and rubbish off premises, complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (sq/ rect) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 including dismantling of floor tiling incl cement mortar bedding (but not backing) removing serviceable tiles to a store and rubbish off premises complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for key scrubbing down with water complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even & smooth without using extra cement including scaffolding upto any height and curing the surface, complete all as specified and directed.

M&L for preparation of new surfaces of wall, roof projection/window chajjas and similar surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/L and UV resistance as per IS 15489:2004 alkali and fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 L/10 Sqm and including priming coat of exterior primer applied @ 0.90L/10 Sqm complete all as specified and directed by Engr-in-Charge. Note : - Tint/Shade shall be approved by Engr-in-Charge.

M&L for rendering 10mm thick on concrete in CM 1:3 in facia or edging of chajjas, ceiling and roof projection making the line in true shape finished even & smooth without using extra cement including scaffolding up to 7 meter height, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling, chajjas and roof projection and applying one coats of oil bound distemper, complete all as specified and directed.

Taking up or down GI pipe 15mm bore and connections, including cleaning for refixing or removal unserviceable pipe including S&F 15mm bore GI tubing medium grade galvanized ISI marked with all fittings complete on walls, complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) white including fixing bolts and connecting to drain pipe, including seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti syphonic pipe etc. complete all as specified and directed.

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anti syphonage pipe etc. and including 110mm bore PVC 'P' or 'S' trap complete incl making good to floor complete all as specified and directed.

M&L for (a) 15mm thick plaster in cement sand mortar (1:4) mixed with water proofing compound as approved as per manufacturer's instructions shall be applied both on floor and wall. The surfaces then shall be curved and allowed to dry. All the joints of pipe shall be sealed properly. (b) Apply a coat of Moisture Cured High Tensile Elastomeric Modified Poly Urethane Based Liquid Membrane on floor as well as on wall as per manufacturer's instructions of make/manufacturers as specified. (c) Manufacture/approved agencies for water proofing treatment to sunken slab/portion membrane shall be as per approved list (Note:- The Rate included for WPC)

M&L for 50mm bore 'medium grade' galvanized pipe as in spout including necessary cutting to wall/beam etc. and proper setting in cement mortar 1:3 complete all as specified and directed.

Demolition of Concrete of any description (unreinforced) and in any position, complete all as specified and directed.

M&L for PCC 1:5:10, type E-2 cement concrete in foundation, filling and mass concrete complete all as specified and directed.

S&F in repair vitreous china wash hand basin (flat back or angle back type) coloured of bowl size 550mmx400mm including waste and waste pipe PVC 32mm dia to be fixed over marble slabs or iron brackets complete all as specified and directed.

S&F in repairs 10 liters PVC low level flushing cistern (white colour) syphonic action type with inlet ball valve float and push type handle including bracket, PVC 32mm dia flush pipe with coupling and fixed complete all as specified and directed.

S&F PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed.

S&F in repair bib taps, fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore, complete all as specified and directed.

S&F in repair stop valve/ angle valve (ISI marked), 15mm dia, cast copper alloy, chromium plated fancy type screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe, complete all as specified and directed.

S&F in repair pillar tap, cast copper alloy, chromium plated, fancy type with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed.

S&F in repair Hand Shower (Health Faucet) with 15 mm dia,1.25 m long Flexible Tube Chrome Finish & Wall Hook for Water closet complete all as specified and directed.

M&L for remove all loose gravel cement mortar, dirt, oil, grease and foreign material by jet of dry air and clean the surface mechanically or by grinding to make it smooth before application loose existing bituminous material manually and with heal torch gun to get smooth plain finished surface with no loose material on existing surface including 15mm thick plaster in CM 1:3. Repair all joints & cracks with highly elastic bituminous cold applied putty tarplasic having penetration after setting upto 8mm Levelling of surface to give proper slope will be done as per site requirements with Shalipatch cold applied, bituminous motor & cold emulsion cum waterproofing liquid Shalikote T-10, Created SSD condition on surface with water. Prime the surface with Tarfelt LM or equivalent make of approved by GE mixed with portable water in the ration of 1.1 and apply @ 400gm per Sqm (As per surface conditions), Apply first coat of Tarfelt LM or equivalent make of approved by GE having elongation 200% conforming to ASTM-C-412 & having crack bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7 days 0.50mm conforming to ASTM-C-412 with no dilation of water on primed surface while the surface is still tacky with consumption of 700gm per Sqm. * Lay Geotex of 45 GSM/Fibre mesh simultaneously and paste it properly with overlap of 50mm. * Allow the first coat to dry for 10 to 12 Hrs. * Apply 2nd coat on cured first coat with consumption @ 700gm per Sqm in opposite direction of first coat by Brush or Roller. * Allow it to dry for 10-12hrs after apply 3rd coat with consumption @ 700gm per Sqm.

Dismantling/taking down of cast iron or unreinforced concrete or PVC soil waste and drain pipe of any size with all fittings complete all as specified and directed.

S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints, fixed to walls with sufficient number of Iron stack clamp complete all as specified and directed.

S&F PVC (SWR) bends of 110mm bore any radius complete all as specified and directed.

S&F in repair 75mm bore PVC floor trap with grating including jointing to waste pipe in cement concrete type B-1, 1:2:4, complete all as specified and directed.

S&F 32mm bore corrugated PVC waste pipe, complete all as specified and directed.

M&L for cutting chases, pinning in brick work for concealed water tubing and making good to facings where required and pointed in cement mortar 1:3 cutting not exceeding 10cm girth, complete all as specified and directed.

S&F in repair Toilet paper holder with flat recessed type stainless steel including CP screws all as specified and directed.

S&F in repair CP towel ring PTMT fixed with and including Chromium plated brass screws and cleats (min wt 90 gms), complete all as specified and directed.

S&F in repair 5.5mm thick glass shelf 12cm wide with CP bracket guard and 60cm long CP railing including Chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed.

Supply, fixing, stringing and drawing submain wiring with 2 run of single core, 4 sqmm PVC insulated and unsheathed, multi stranded copper conductor cable FRLS using colour code for phase red and neutral black with and including 4 sqmm PVC insulated and unsheathed FRLS conductor multi stranded cable in green colour connected to common earth point and connected to earth dolly drawn through PVC rigid conduit 20 mm bore, heavy grade (ISI marked) with and including all accessories, fixed to surface/ recessed complete all as specified and directed.

Supply and fixing in Replacement of LED Lamp 10 watt B-22 holder base with polycarbonate body and aluminium heat sink warm white complete all as specified and directed by Engineer - in - Charge.

S&F High performance IP66 LED Street light 20 watt, housing made of die-cast aluminium, with street optic lens, with all accessories and connecting up with and including provision of 3 core flexible copper wire of size 1.5sqmm from ceiling rose, and 20W LED light etc. drawn through and including 32mm bore GI light grade protection pipe upto 1.0m length with suitable fixing accessories on walls, complete all as specified and directed.

S & F SPN 8 way sheet metal enclosures factory made DB double door 230 V AC, 50 Hz AC 200 Amp rated bus bar complete all as specified and directed

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cm X6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc. including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I. all specified

Supply and lay in trenches/ on roof/ on wall/ steel water tubing galvanised medium grade 25mm dia with all fittings complete all as specified and directed.

S&F GI tubing medium grade Galvanized of size 40 mm bore laid in trenches or ground/ in wall surfaces with and including all fitting, all as specified by Engr-in-Charge.

S&F for 25mm dia gun metal gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed by Engr-in-charge.

M&L for Cutting cast iron pipes up to 80 mm dia and reducing to required length in position for insertion of new tees, branches, etc., complete all as specified and directed.

Dismantling of old U/S valve pit of size 120x120x90cm (internal dimensions of the chamber) including and removing the debris at a distance not exceeding 50 Mtr and M/L for brick masonry with cement mortar 1:6, 23 cm and flush pointing externally work proceeds in the same mortar complete (using 30% old bricks & 70% New bricks) complete with the following specifications and as directed by Engr-in-Charge. Note:- (1) 10mm thick plaster internally in CM 1:6, (ii) Flooring 40mm thick in PCC 1:2:4 type B-1 over 75 mm thick hard core of gauge not exe 63mm thick. (iii) Angle iron frame 40x40x6mm thick for cover and mild steel 3mm thick cover with locking arrangement, handle and necessary hinges etc., (iv) PCC 1:3:6 type C-2 100mm thick in foundation. (v) Two coats of synthetic enamelled paint to cover internally and externally over a paint of Red Oxide primer.

M & L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified and directed. Note: Punned thickness of sand shall be measured.

Supply and laying sub class 'B' bricks of old size (230x115x75 mm) or of size locally available , laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge

Supply, laying and testing in replacement of cable XLPE insulated armoured heavy duty electric cable with extruded insulation aluminium conductor, 1100 volts grade of cross-sectional area 16 Sqmm 4 Core, complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed

M&L for modular point wiring for light point with 1.5 sqmm (nominal area) PVC insulated FRLS and unsheathed multistranded copper conductor cable 1100 volts grade drawn through and including PVC rigid concealed conduit not less than 1.8 mm thick (ISI marked) with all accessories including suitable modular plate (Inner + Outer) and modular metallic boxes of suitable sizes including 1.5 sqmm PVC FRLS insulated unsheathed copper conductor multistranded cable for continuous earth conductor connected to common earth dolly, complete all as specified & directed. Note:- Proper colour coding is to be followed as per IS Specification.

All as per item No. 149.00 here-in-before but for one 5 pin 6 Amp socket outlet point on same board controlled by one way switch SP, one way 6 Amp, 240 Volts

All as per item No 149.00 here-in-before but using 2.5 Sqmm (nominal area) multistranded copper conductor cable including 2.5 Sqmm size FRLSH PVC insulated and sheathed copper conductor cable as earth conductor (green colour) connected to common earth dolly for one 6 pin socket outlet 16 Amps multi purpose on independent point complete all as specified and directed.

M&L in replacement for Modular switch 1 way 6A, 1 module complete all as specified and directed.

S & F Socket, 6A - 2/3 pin combined 2 module, (ISI marked) complete all as specified and directed. .

S & F SPN 4 way sheet metal enclosures factory made DB double door 230 V AC, 50 Hz AC 200 Amp rated bus bar complete all as specified and directed

S&F 240V, 10 KA miniature circuit breaker (MCB) of single pole and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

S&F in replacement of MCB Protected Socket With sheet steel Enclosure single pole 20 Amp with 3 pin plug top for AC/ Geyser connection from Socket point to stabilizer complete all as specified and directed.

M&L for ceiling rose 2-3 terminal size 65x20mm, complete all as specified and directed.

Taking out/down water heater of any type and capacity and servicing of the same incl cleaning heating element, water pipe, checking of electrical connections, and checking of NRV, safety valve/air release valve etc. and refixing of the same after servicing, connecting with inlet and out let water connection and electrical connection and testing complete all as specified and directed.

Supply and installing of the electric water storage heater of ABS body type of 25 ltr capacity with rated power 2 KW, 5 star rated, vertical type, thermally insulated mild steel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode, NRV, thermostat, indicators and temperature adjustable knob including steel braided flexible connection for pipe of size 15 mm dia bore with GI hexagonal adopters/Nuts on the both sides for inlet (cold water supply) & outlet (hot water supply) and including provision of wall mounting arrangement and mounding wall with suitable size of anchor bolts with complete connection of water including testing after installation complete all as specified and directed by Engr-in-Charge .

Supply and fixing of LED lights fitting 1x 20W,minimum 3.5 feet 220V, AC decorative box type with driver, holder including LED tube light connecting up with flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing of surface and wall mounted 10W LED natural white Engineering plastic batten, with white acrylic cover duly prewired and connecting complete all as specified and directed by Engr-in-Charge.

Taking down and refixing of Ceiling fan & Exhaust fan any size or type from the existing site and refixing the same at same place after carrying out necessary repair work including two coats of synthetic enamel paint of any approved colour after cleaning etc. all as specified and directed by Engineer - in - Charge.

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers and complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M & L for cutting hole in brick/stone masonry wall and provision of PCC 1:3:6 for making proper suitable size of hole to matching with size of exhaust fan for proper ventilation including MS bolts 04 Nos for fixing exhaust fan all as spd and directed. Note : (i) Rates are deemed to be included to making the cutting hole smoothly and colour wash as per existing colour. (ii) Rates are deemed to be including charges of hiring T & P, i.e. ladder square folding and insurance of labour deployed, being holes are made to be at mutlistorey bldgs of different height .

Note: (i) In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account. (ii) The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum.

VIJAY CONSTRUCTION CO (BID ID -3324710)

Jay Ann Construction Company (BID ID -3317776)