Loading…
Loading…
Tender Value
₹1.2 L
EMD Value
₹2,400
Closing Date
19 Jun 2026, 6:00 pmClosed
Block Development Officer
Rangli Rangliot Dev. Block, Takdah, Darjeeling
Extension and Repair Work of Makhamali Samaj Gharm, Takling-I GP
2026_DMD_5015185_1
16/RR/BDO/APAS/2025-26, date-09/06/2026 Fourth Call
Open Tender
CIVIL WORKS
Percentage
45 days
Takling-I
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹2,400
19 Jun 2026
9 Jun 2026
20 Jun 2026
10 Jun 2026
19 Jun 2026
10 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) form roof or wall after unscrewing bolts, nuts, screws etc. and stacking the marerial at site as directed. (Payment to be made on measurement of portion of roof or wall removed.). | 98.18 | Sqm | 41 | ₹4,025.38 |
| 2 | Stripping off worn out plaster and raking out
joints of walls, celings etc. upto any height and in
any floor including removing rubbish within a
lead of 75m as directed. | 84.9 | Sqm | 19 | ₹1,613.1 |
| 3 | Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). [Excluding cost of chipping over concrete surface]. | 84.89 | Sqm | 192 | ₹16,298.88 |
| 4 | Galvanized corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugaion minimum side lap. ( payment to be made on area of finished work). (GCI sheet to be supplied by contractor). | 58.91 | Sqm | 786 | ₹46,303.26 |
| 5 | Galvanised iron sheet ridging fitted with necessary bolt, screws, washers etc complete. (225 mm end lapping). | 1 | metre | 462 | ₹461.54 |
| 6 | Galvanized iron sheet eaves gutter fitted and fixed with necessary 50 mm X 6 mm.M.S.flat bar clamps bent to design, bolts. Nuts, washers etc. complete. Eaves gutter made of 0.63 mm. sheets.(300mm End lapping). | 1 | metre | 418.8 | ₹418.38 |
| 7 | Panel shutters of door and window, as per design (each panel consisting of single plank with out joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.In ground floor.(In case of non-supply of single plank, panel rate of reduction of 20% will be made). | - | Sqm | 1,598.4 | - |
| 8 | Taking out shutter of door and window, dismantaling by parts (for repair or replacement of damaged parts), reassembling and refitting and rehanging same with old fitting but with new screws as necessary.( where different part of same shutter are renewed under different item, payment under item 73 will be made once only). | - | Sqm | 126 | - |
| 9 | Colouring Whole Structure | 1 | No | 9,009.5 | ₹9,009.5 |
| 10 | Add GST @ 18% | 1 | No | 18,123.79 | ₹18,123.79 |
stage.html
html • 0.01 MB
tech_bid_open.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.61 MB
BOQ_5083809.xls
BOQ • 0.34 MB
SBD.pdf
Tender Documents • 0.39 MB
extensiontime.pdf
PDF • 0.08 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .