8782 SPECIAL REPAIRS TO BLDG NO 27 PATIENTS COOK HOUSE AT ALC PUNE UNDER GE SOUTH PUNE

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) incl chequered tiling and Paver blocks complete all as specified and directed.

Dismantling stone slabs of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 25mm thick PCC type B-0 1:2:4 ( 12.50mm graded agg) as in levelling course complete all as specified and as directed.

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection and the like all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding complete and removing rubbish off from the premises complete all as specified and directed.

M&L for coloured glazed ceramic designed tiles in vertical surface 600x 300x 7mm thick set and jointed in neat cement slurry and jointed with 3 mm spacers and ponted in coloured epoxy grout to match the colour of tiles over incl. 10 mm thick backing coat in CM 1:4 to maintaine true plumb complete all as speicified and directed.

M & L granite (Telephonic jet black) work ( table rubbed and polished ) 18-20 mm thick in steps,risers, jambs, pillars, window cill , cooking platform and flooring including bedding layer 15 mm thick in CM 1:6 on stone / brick masonry / concrete surfaces including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as speicified and directed.

M & L Machine cut cuddapa stone slabs one side polished 20 to 25mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 20mm screed bed in cement mortar (1:6) complete all as specified and as directed.

Rounding edges of stone slab one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed.

M & L Mirror polished kota stone slab flooring 20-25 mm thick, over 20 mm thick cement screed base in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shed of slab with marble strip including rubbing and polishing complete all as specified and directed.

M&L for grinding of existing terrazo or kota stone flooring by carburudum stone of 320 to 400 grit size. After grinding the surface shall be washed clean and grouted with neat cement grout of cream like consistencty using the same coloured cementas in the original mix After grinding the surface shall again be washed clean and rubbed hard with felt and slightly moistened oxalic acid powder at the rate of 5 gm of oxalic acid for one sqm of floor area. After completion of grinding work the wax polish shall be sparingly applied with soft linen on the clean and dry surface. Then the polishing machine fitted tith bobs shall be run over it. Clean saw dust shall then be spread over the floor and polishing machine machine again applied.

S&F GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc including taking up or down carefully steel tubing and connections complete all as specified and directed of the following sizes :-

(a) 15mm bore

(b) 20mm bore

(c) 25 mm bore

S&F in repairs Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed of following bore of pipe :- (a) 25 mm bore

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades,shelves , lintels, etc.and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth in brick walls complete all as specified and as directed.

S&F in repair Counter wash basin of Size 550x460 including waste fittings brass chromium plated 32 mm including providing CI brackets, PVC waste pipe 32mm dia, waste coupling 32mm bore of CP incl 15mm bore CP fancy type pillar cock etc all as specified and directed.

S&F in repairs 15mm bore bib taps, brass chromium plated, cast copper alloy fancy type handle screwed down, screwed for iron pipes complete all as specified and as directed. .

S & F in repairs 15 mm stop valves / angular stop cock, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends complete all as specified and directed.

S & F Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats fixed in repairs complete all as specified and as directed.

S& F in repair 5mm thick sheet glass corner shelf, 250mm radius including CP railing and CP brackets, complete all as speicified and directed.

S & F in repairs chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S& F Stainless steel( 304 grade) triple bowl commercial sink of size 180 x 60/65x80/85 cm and 1.2 mm thick with legs including waste pipe fitting complete all as speicified and directed.

S& F premium grade stainless steel Commercial sink fauset single handle upgraded spring pull out sprayer, monobloc sink fauset 360 degree swivel spout with hose, pull down kitchen fauset with 360 rotation spout and 2 spray modes complete all as specified and directed.

S & F wall mounted commercial fauset with flexible pull down sprayers 47 inch fauset with 8 '' adjustable centres with 6/12 inch wall mont bracket inclucing all fiitings fitting complete all as speicified and directed.

S & F of stainless steel vegetables rack silver colour 6 feet height with 4 shelves weight tolerance capacity 150 KG complete all as speicified and directed.

S &F of stainless steel rectangular plate rack with 4 shelves in silver colour standing unit of not less thnan 5 feet height storage capacity 100/150 plates etc complete all as speicified and directed.

S & F Rotational moulded polyethylene water storage tanks of capacity 1000 Litre (cylindrical vertical with closed top) hoisted and fixed in position incl all necesarry GI fittings including dismantling of existing water tank complete all as specified and directed.

S&F in repairs mild steel chromium plated SS-302 grade grating (square) 125x125 mm with removable lead fixed over floor / nahani trap (with hole OR without hole), complete all as speicified and directed.

S & F Stainless steel kitchen channel gratings 304 grade 1000mm x100x 25 mm for kitchen drain complete all as speicified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including taking down existing pipe complete all as speicified and directed. Note :- Rate quoted shall deemed to be inclusive of necessary scaffolding / security measures as the work is to be carried out for elevated height upto 12 mtr height building.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall,including taking down existing pipe complete all as speicified and directed. Note :- Rate quoted shall deemed to be inclusive of necessary scaffolding / security measures as the work is to be carried out for elevated height upto 12 mtr height building.

S&F 110mm bore PVC (SWR) bends / Tee with acess door, complete all as speicified and directed.

S&F 75mm bore PVC (SWR) bends / Tee with acess door, complete all as speicified and directed.

Taking down shutters of any description n.exc 1.0 sqm each and rescuring or easing & adjusting after repair in door opening and connected carpentry work and refixing at same opening complete all as all specified.

Dismantling timber scantling in any position (unframed wok) exc 40sqcm in section complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting in roof covering complete all as specified and directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick , 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / ridgesl, fixed with self tapping screws complete all as specified and directed.

Dismantling of wrought or MS work of any description etc as directed.

M&L for MS framed work conforming to grade E-165 (Fe-290) or Fe-310-O of MS angle or other sections, such as grills, gratings with ends of bar shouldered and / or riveted or forged into spikes; framed guard bars; railings and like completed all as directed by Engineer-in-charge.

Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W(GdeE- 250) quality A complete all as specified and as directed.

M&L for preparing new surfaces of steel over 10cm in width or girth,not otherwise described and applying two coat of synthetic enamal (ordinary tint) over a coat of red oxide primer all as specified and as directed.

M & L Providing and fixing Gypsum Board 12.5 mm thick in ceiling fixed with screw (as per manufacturers instructions) to Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including two coats of oil bound distemper over primer over and including 1 mm thick white putty on ceiling including dismantling of existing false ceiling with gridcomplete all as specified and directed.

M & L for decorative POP cornices/moulding of pattern as per approved by Engr-in-charge of cross section area exc 13 Sqcm and not exc 25 Sqcm including two coats of oil bound distemper over primer on ceiling complete all as specified and directed.

M&L for preparation of new un decorated surfaces of ceiling incl, cornice and applying two coat of distemper oil emulsion over alkali resistant priming paint over 1 mm thk putty on ceiling all as spd and directed.

Taking down of chowkat with shutter nexc 1.50 sqm each without taking off shutters from the frame complete all as specified and directed.

Taking down of chowkat with shutter exc 1.50 sqm & nexc 4.0 sqm each without taking off shutters from the frame complete all as specified and directed.

S&F Stainless Steel 304 grade Silver finish curtain rod 25 mm bore all as specified & as directed.(Make : Herrlich Homes or equivalent.)

S &F in repairs stainless steel fancy type round shape ball bracket suitable for 25 mm bore curtain rod complete all as specified

S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to steel or wooden windows / door / shutters / frames etc. complete all as specified and as directed.

Fabrication & fitting in repair of modular kitchen with cabinet/ shelves & wardrobe/ cupboard made out of 18 mm thick PVC board plain colour & laminated sheet with piano hinges (sheet shall be laminated over PVC board with solvent adhesiv at external faces) including providing cabinet for keeping baskets/ cutlery basket with handles/ door shutters all as specified and directed NOTE : PVC sheet fittings & fixture will be measured and paid seperately as supply only under relevant items .

Supply only 18 mm thick Rajshri Celuka ply of Single Side Prelam/ Rigidlam color fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the engineer - in -charge. (Density- 575 to 600 Kg/CBM) (Make- Rajshri Plastiwood or its equvallent.

Supply only 18 mm thick PVC Celuka Ply Plain White color both side fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the engineer - in -charge. (Density- 575 to 600 Kg/CBM) (Make- Rajshri Plastiwood or its equvallent.

supply only 100 mm dia oval shape SS handle fancy type brass polished bright finish complete all as specified and directed

Supply only Chrome Plated Stainless Steel 304 grade wire basket for utenisils with necessary fixing clips fixed in cupboards etc complete in all respect complete all as specified and directed

Supply only Ball bearing runner 45 mm Telescopic (KTS - 20) full extension, load capacity 50 Kgs, complete all as specified and directed .

Supply only Auto closing hinges 35mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters, complete all as specified and directed, Make: KAFF, Godrej, Hettich.

S&F Aluminium powder coated door with chowkat on pivots alongwith hydraulic door closer door lock , handle,5mm th plane glass fixed with rubber beading in top panel and glazing clips MS clamps and 12mm th laminated particle board as bottom pannel both side laminated) using following sections for shutter and frame as given in 'JINDAL' catlogue complete all as specified and as directed. (a) Rectangular tube - 14005 (b) Vertical rail - 19501 (c) Top rail -19503 (d) Middle rail -20060 (e) Bottom rail- 19511

S & F pressed steel frames for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm filled with PCC 1:3:6 type C-0 all as specified.

S & F pressed steel frames for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm filled with PCC 1:3:6 type C-0 all as specified.

S&F IInd class hard wood 35mm thick factory made, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F IInd class hard wood 35mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F in repair 100 mm butt hinges, excruded aluminium alloy type B-21 with galvanised mild steel ISI markedhinge pin, anodised and fixed with wooden screws complete as specified and directed.

S&Fin repair Aluminium anodised 150mm handle cast type, complete as specified and directed.

Supply and fixing in repair 150 mm aluminium anodised barrel tower bolts of extruded section, ISI marked and fixed with steel screws, complete as specified and directed.

S&F in repair aluminium alloy sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 300 mm of ISI mark.complete all as specified and directed

S&F luminium anodised 150mm handle cast type, complete as specified and directed.

Supply and fixing in repair 150 mm aluminium anodised barrel tower bolts of extruded section, ISI marked and fixed with steel screws, complete as specified and directed.

S&F aluminium alloy sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 300 mm of ISI mark.complete all as specified and directed

M&L for prepration of new or previously untreated wooden surface and apply two coats synthetic enamelled paint over one coat of pink primer of any descriptiion, not otherwise described over 10cm width or girth

S&F three track sliding window with two or more shutter with 4mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S & F in repairs ventilators/louvers using 4mm thick x 10cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed (a) SP : 20048 (b) Glazing clips : 19352

S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

Demolition of brick/precast block walling built in cement mortar all as directed.

M&L for Brick work with Fly ash brick, straight or curved on plan exc 6M Mean radius built in type CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick in CM(1:6) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement), complete all as specified and directed.

M&L for 15mm rendering thick in CM (1:4) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement), complete all as specified and directed

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick/concrete surfaces sagol finish including taking down cement plaster all as specified and as directed.

M&L for rendering 15 mm thick in CM(1:4) on fair faces of brick/concrete surfaces including taking down cement plaster all as specified and as directed.

M & L for 5 mm thick rendering in cement mortar 1:3 on fair faces of of ceiling surfaces finished even and smooth including taking down cement plaster complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new decorated surfaces of ceiling and applying three coat of white wash complete all as specified and as directed by Engr-in-Charge.

M&L Two coats of Oil bound distamper including prepration of newly plastered wall surface over a coat of primer

Complete removal of existing treatment on wall and applying two coat of Oil Bound distemper over a coat of alkali resistence primer, white or tinted on wall complete all as speficied

Preparationof new surface and applying two coats of weather proof exterior acrylic emulsion paint (1st Quality) on walls, cornices, borders, facia of chajjas & projected columns over and including priming coat of exterior primer complete all as specified and directed. Note :- Exterior acrylic emulsion paint shall be anit-fungal, dust resistant, water repellant, crack-bridging, weather proof type 1st Quality.

Complete removal of existing treatment and applying two coats of weather proof exterior acrylic emulsion paint (1st Quality) on walls, cornices, borders, facia of chajjas & projected columns over and including priming coat of exterior primer complete all as specified and directed. Note :- Exterior acrylic emulsion paint shall be anit-fungal, dust resistant, water repellant, crack-bridging, weather proof type 1st Quality.

Writing letters on PVC coloured sheet of size 450mm x 200mm x 6mm thick, Writing letters / Numerical (Building No/ name)as directed by Engineer-in-Charge and fixing to Building with screws 4No Each, Any height of Building upto 12m height, size of letter 80 x 125mm with Max of 4 letters complete all as specified and as directed.

M& L for Two coats of wall care putty, level and smoothen the surface and cure the first coat lightly once it dries apply the second coat of 0.5-1 mm thickness once the first coat is fully dried and set. The thickness of each coat should not exceed 1mm and total thickness of putty should not be more than 2mm complete all as specified and directed.

M & L for rendering 10 mm thick in CM 1:3 on concrete surface/ Slab finished even and smooth without using extra cement with admixture of integral water proofing compound @ 3 % by weight of cement for filling depressions if any of to receive water proofing treatment(WPC shall be measured and paid)

Supply only integral water proofing compound

S& F of Apply a uniform coat of primer at 0.70 kg/sqm over cement plaster,3 mm thick and weighing not less than 3.6 kg/sqm Atactic PolypropylenePolymer (APP) modified bitumen - based prefabricated five layer water proofing membrane reinforced with non woven polyester matt black finished over compatible primer at 0.40 Ltr/sqm of density at 25 degree centigrade 0.87 - 0.89 kg/litre and viscosity 70-160 cps or cold sticker and torch application of membrane with 10 cm overlap both ways after necessary preparation of surface complete as per manufacturers instructions. Apply two coats of bitumastic - aluminium paint over the membrane incl dismantling/ taking out of existing roof treatment.

S&F of PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

M&L for 75 mm thick PCC type D 2 1:4:8 (using 40mm graded aggregate ) as in pavement,sub base and flooring etc.complete all as specified and as directed by Engr-in-Charge

M&L chequrred cement concrete tiles 30cm x 30cm x 20mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment over and incl 20mm thick screed bed in CM (1:4) including dismantling of old stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar. complete all as specified and as directed.

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L Reinforced concrete pipes, class NP2 bore dia 150mm laid and jointed complete with collars complete all as specified and as directed.

M&L for Plain Concrete type D2 1:4:8 in concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in all as specified and directed.

M&L For PCC 1:4:8 type 'D-2' (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed by Engr-in-Charge.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cm 1:4 complete all as specified and as directed.

M&L PCC 1:2:4 type BO (using 12.50mm graded aggregate) for haunching inside the manhole complete all as specified and as directed.

M&L Providing precast cement concrete Type B1, 1:2:4 (20mm graded aggregate) in landings, cover slabs (for man holes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cm 1:6 complete all as specified and as directed.

M&L for Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S& F of Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and as directed.

M&L for point wiring complete with 1.5 Sqmm two single core PVC insulated, sheathed 1100volts agrade cable with stranded copper conductor FRLSH grade conforming to IS-694 part II with ISI mark FRLSH grade drawn through and including suitable size rigid non metalic PVC casing n caping with all accessories, including suitable size sunkpresses steel or cast iron terminal box with 3mm thick plastic laminated sheet top cover fixed flush with wall surface by means of brass screw and sunk cup washers for mounting of switches, sockets, fan regulators etc including providing 1.5 Sqmm PVC insulated sheathed multistranded copper conductor cable as earth wire connected to metallic bodies of luminaires/fan etc at one end and to common earth dolly at other end all as specified for fan/light point complete all as specified and directed by Engr-in-Charge.

Same as item no 110 but for One 5 Amps socket point on independent board

Same as item no 110 but for One 5 Amps socket point on same board with other switches

M&L for point wiring with two single core 4 Sq.mm size multistranded copper conductor FRLSH PVC insulated cables and one single core 4.0 Sq.mm size green colour PVC insulated,multistranded copper conductor FRLSH PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including rigid PVC CONDUIT and conduit accessories,confirming to IS specifications,concealed in wall/ ceiling /trusses with suitable clamps, screws etc., including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting SOCKETS OUTLET 15 Amps multi purpose on independent board ches, sockets, fan regulators etc.,including connecting up and testing, all as specified and as directed.

M& L for dismantling and taking down fluorescent tube light frame single/double /street light fittings of any wattage or size for repair or replacement of burnt/worn out accessories complete all as specified and directed.

S&F in replacement of LED tubelight batten 20 W, 4 feet length,6500 k ,100 lms/watt, Aluminium housing, glare free, PH>0.95, THD<10% complete all as specified and directed by Engr-in-Charge.

Taking down fan/ exhaust fan sealing cable end,dismantling blades and removing fan and blades to stores

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan

S & F in repair five stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd.

Fixing only exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and should have supporting LM 79 & LM 80 test certificate from govt approved NABL accredited Lab complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs switch piano 6 Amps one way flush type, ISI marked, all as specified and directed by Engr-in-Charge.

Supply and fix in repairs socket outlet 2 in 1, 3 pin, 6 Amps flush type, make ISI marked, all as specified and directed by Engr-in-Charge.

S&F in repairs switch socket combination 3 pin, 16 Amp, flush type universal complete all as specified and directed by Engr-in-Charge.

M&L in repair for sub main wiring with two runs of single core PVC FRLSH insulated cable with copper conductor multistranded 1100 volts grade 4.0 sqmm through and including with suitable size of PVC casing and caping and its accessories, wall surface with fixing arrangement etc including one runs of 4.0 sqmm PVC insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all as specified and directed by Engr-in-Charge.

M&L in repair for sub main wiring with two runs of single core PVC FRLSH insulated cable with copper conductor multistranded 1100 volts grade 6.0 sqmm through and including with suitable size of PVC casing and caping and its accessories, wall surface with fixing arrangement etc including one runs of 6.0 sqmm PVC insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all as specified and directed by Engr-in-Charge.

M&L in repair for sub main wiring with four runs of single core PVC FRLSH insulated cable with copper conductor multistranded 1100 volts grade 6.0 sqmm through and including with suitable size of PVC casing and caping and its accessories, wall surface with fixing arrangement etc including one runs of 6.0 sqmm PVC insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repair of sheet metal enclosure MCB DB TPN 4 ways double door type with 100 amps rated tin plated copper busbar for each phase,neutral & earth link, standard conformity IEC 61439-3, complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair 415 V 10 KA 'C' curve MCB of TPN 16 to 32 Amp current carrying capacity in the DB complete with connection testing and commisioning complete all as specified and directed by Engr-in-Charge

Supply and fixing in repair 415 V 10 KA 'C' curve MCB of TPN 40 to 63 Amp current carrying capacity in the DB complete with connection testing and commisioning complete all as specified and directed by Engr-in-Charge

Supply and fixing in repair 415 V 10 KA 'C' curve MCB of TP 25 to 63 Amp current carrying capacity in the DB complete with connection testing and commisioning.

Supply & fixing in repair of sheet metal enclosure MCB DB SPN 8 ways double door type with 200 amps rated busbar all as specified and directed .

Supply and fixing in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP of 6 to 32 Amps current rating complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge

Supply and fixing in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN of 32 Amps current rating complete with connection testing and commissioning.

M & L in repair for MCCB 4 pole, 415 V of 100 Amps current rating with breaking capacity 16 KA complete with connection testing and commissioning complete all as specified and directed.

Supply & fixing in repair of sheet metal enclosure VTPN MCCB DB double door, 8 way upto suitable for MCCB 125 amp, insulated copper busbar assembly, IP43 type complete all as specified and directed by engineer in charge.

M&L for Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

Supply and fix in repair MCB TPN enclosure 4 module all as specified and directed by all Engr-in-charge.

Supply and fix in repair for Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

S&F in repairs titanium enameled heating element 2.0 KW of 50 liters storage type water heaters (geyser) duly mineral filled, ISI Marked complete all as specified and directed by Engr-in-Charge

S&F in repairs thermostat adjustable between 30 degree C to 85 degree C for 50 ltrs capacity geyser complete all as specified and directed.

S&F in repairs brass chrominum plated connection 15 mm dia 600 mm long (heavy duty) with 2 Nos brass chrominum plated nuts and washer for hot water complete all as specified and directed by Engr-in-Charge

M&L for Earthing complete with Galvanised Steel Earth Plate Electrode 600 X 600 X 6 mm thick buried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to galvanised earth lead wire 4.0mm dia for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per Electrical Plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. and disconnecting and taking down existing Earthing of any description complete all as specified and as directed. (Note : GI earth strip and GI protection pipe upto 7.5 mtr length shall be included in this item.)

Supply, laying and testing in repair cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 4 core complete all as specified and directed by Engr-in- Charge.

Supply, laying and testing in repair cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50.0 sq mm 3.5 core complete all as specified and directed by Engr-in- Charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for laying/taking out cable and getting out in soft/loose soil all as specified and directed.

Returning filling in soil including spreading leveling, watering and well ramming in layers not exceeding 25cm all as specified and directed.

Removing excavated material/soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

S&F DWC high density polyethelene pipes having 63/50 outer dia mm, inner as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 16098(Part I 2013) for protection of underground cable laid along pole/along wall/in PCC on GL and including all fittings as required at site complete all as specified and directed. Make -IS Approved

Taking down old XLPE armoured aluminium UG cable of any size , any capacity complete all as specified and directed by Engr-in-charge.