CPPP

Active

Works

Machineries/ Mechanical Engg Items

Renovation of Firefighting System including Installation of Pumps and Laying of MS Pipeline with Accessories at Multiple Slipway, Marine Dockyard, Sri Vijaya Puram

Andaman Lakshadweep Harbour Works

Multiple Slipway, Marine Dockyard, SVP | South Andamans, Andaman And Nicobar Islands

Amount: ₹19.2 LCloses: 4 Nov 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published13 Oct 2026
Closes4 Nov 2026
Bid Opening5 Nov 2026

Tender Value

₹19.2 L

EMD Value

₹38,459

Closing Date

4 Nov 2026, 3:00 pm

Tender Inviting Organisation

Name

Executive Engineer (CSWD), ALHW

Address

Executive Engineer (CSWD), Andaman Lakshadweep Harbour Works, Sri Vijaya Puram - 744101

Work Description

Renovation of Firefighting System including Installation of Pumps and Laying of MS Pipeline with Accessories at Multiple Slipway, Marine Dockyard, Sri Vijaya Puram

Tender Information

Tender ID

2026_ALHW_930103_1

Reference Number

ALHW/DCEM/TECH(T150)/2/2026 (e-3670) Dated 13-10-2026

Tender Type

Open Tender

Product Category

Machineries/ Mechanical Engg Items

Form of Contract

Works

Period of Work

60 days

Location

Multiple Slipway, Marine Dockyard, SVP

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredEMD as per NIeT condition. (.pdf)

RequiredCopy of Enlistment order and Experience as per NIeT condition. (.pdf)

RequiredCopy of Certificate of Financial Turnover and Form C-3 as per NIeT condition (.pdf)

RequiredCopy of PAN and Active GST Registration. (.pdf)

RequiredCopy of Affidavit and Integrity Agreement as per NIeT condition. (.pdf)

RequiredCopy of avg. annual financial turnover and P and L Stmt. and Banker/Networth Cert. as per NIeT. (.pdf)

Finance

RequiredFinancial Bid-BOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹38,459

Important Dates

Last Activity

13 Oct 2026

Published

13 Oct 2026

Bid Opening

5 Nov 2026

Download Starts

13 Oct 2026

Download Ends

4 Nov 2026

Submission Starts

13 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (16 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Cutting and removing RCC/rich mix by using pavement breaker including cost of hire charges of pavement breaker and the work shall be carried out as per the direction of the EIC.The rates including cost of hire charges of pavement breaker or air comprssor with POL and operator all labour charges for breaking and stacking of unserviceableand serviceable materials, gas cutter & minor T&P, transportation of materials, GST, LWC, ..etc , complete.	35	Cum	-	-
2	Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work upto plinth level.1:3:6 (1 cement, 3 pulverised stone sand and 4 grade stone aggregate 20mm nominal size).The work shall be carried out as per the direction of the EIC.. The rates including cost of cement, all other materials, all labour charges, materials, minor T&P, transportation of materials, GST, LWC, ..etc , complete.	16	Cum	-	-
3	Providing form work including centering shuttering so as to give rough finish strutting and propping etc. height of propping and centering below supporting floors to ceiling not exceeding 4m and removal of the same for in site reinforced concrete and plain concrete work in: (a) foundation footings bases of coloumns etc and mass concrete.The work shall be carried out as per the direction of the EIC.The rates including cost of all labour charges, all other materials, minor T&P, transportation of materials, GST, LWC, ..etc , complete.	15	Sqm	-	-
4	Providing and fixing Heavy Duty MS pipes conforming to IS 1239 (Part 1) Class 'C'of nominal bore 80 mm (3" dia) complete with fittings. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate is including the cost of MS pipes and fittings, cutting, threading, welding/jointing, trenching and refilling, all labour, materials, T&P, transportation, LWC, GST, etc., complete.	48	Mtr.	-	-
5	Providing and fixing Heavy Duty MS pipes conforming to IS 1239 (Part 1) Class 'C' of nominal bore 100 mm (4" dia) complete with fittings. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate is including the cost of MS pipes and fittings, cutting, threading, welding/jointing, trenching and refilling, all labour, materials, T&P, transportation, LWC, GST, etc., complete.	302	Mtr.	-	-
6	Providing and fixing approved quality Heavy Duty MS Bend conforming to IS 1239 (Part 2) of nominal bore 80 mm (3" dia), including cutting, threading, jointing, and welding. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate includes cost of MS bend, jointing materials, cutting/welding charges, all labour, T&P, transportation, LWC, GST, etc., complete	14	Nos.	-	-
7	Providing and fixing approved quality Heavy Duty MS Bend conforming to IS 1239 (Part 2) of nominal bore 100 mm (4" dia), including cutting, threading, jointing, and welding. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate includes cost of MS bend, jointing materials, cutting/welding charges, all labour, T&P, transportation, LWC, GST, etc., complete	26	Nos.	-	-
8	Making connection of MS distribution branch pipe to 100 mm (4") nominal bore main header line by providing and fixing Heavy Duty MS 'T' Joint conforming to IS 1239 (Part 2) [3" dia & 4"dia], including cutting, threading, and welding. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate includes cost of MS 'T' joint, cutting and welding charges, all labour, required jointing materials, minor T&P, transportation, LWC, GST, etc., complete	18	Nos.	-	-
9	Providing and fixing Gunmetal (GM) Single Landing / Hydrant Valve of 63 mm nominal size, ISI marked conforming to IS 5290, complete with blank cap, chain, and flanged/threaded jointing accessories. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate includes cost of GM hydrant valve, blank cap with chain, bolts, nuts, rubber washer/gasket, fixing, all labour, T&P, transportation, LWC, GST, etc., complete.	9	Nos.	-	-
10	Providing and fixing Heavy Duty Mild Steel (MS) companion flanges conforming to IS 6392 / IS 1239 for 80 mm (3") and 100 mm (4") nominal bore MS pipes, fittings, tees, and bends, including welding, alignment, and jointing with MS bolts, nuts, washers, rubber insertion gasket, and gasket shellac as required. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate includes cost of MS flanges, MS bolts and nuts, rubber gaskets, jointing compound, gas cutting, electric welding electrodes, hire charges of welding equipment, all labour, T&P, transportation, LWC, GST, etc., complete	118	Nos.	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 18.61 MB

Work Item Documents

BOQ_977397.xls

BOQ • 0.29 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Cutting and removing RCC/rich mix by using pavement breaker including cost of hire charges of pavement breaker and the work shall be carried out as per the direction of the EIC.The rates including cost of hire charges of pavement breaker or air comprssor with POL and operator all labour charges for breaking and stacking of unserviceableand serviceable materials, gas cutter & minor T&P, transportation of materials, GST, LWC, ..etc , complete.

Cum

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work upto plinth level.1:3:6 (1 cement, 3 pulverised stone sand and 4 grade stone aggregate 20mm nominal size).The work shall be carried out as per the direction of the EIC.. The rates including cost of cement, all other materials, all labour charges, materials, minor T&P, transportation of materials, GST, LWC, ..etc , complete.

Cum

Providing form work including centering shuttering so as to give rough finish strutting and propping etc. height of propping and centering below supporting floors to ceiling not exceeding 4m and removal of the same for in site reinforced concrete and plain concrete work in: (a) foundation footings bases of coloumns etc and mass concrete.The work shall be carried out as per the direction of the EIC.The rates including cost of all labour charges, all other materials, minor T&P, transportation of materials, GST, LWC, ..etc , complete.

Sqm

Providing and fixing Heavy Duty MS pipes conforming to IS 1239 (Part 1) Class 'C'of nominal bore 80 mm (3" dia) complete with fittings. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate is including the cost of MS pipes and fittings, cutting, threading, welding/jointing, trenching and refilling, all labour, materials, T&P, transportation, LWC, GST, etc., complete.

Mtr.

Providing and fixing Heavy Duty MS pipes conforming to IS 1239 (Part 1) Class 'C' of nominal bore 100 mm (4" dia) complete with fittings. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate is including the cost of MS pipes and fittings, cutting, threading, welding/jointing, trenching and refilling, all labour, materials, T&P, transportation, LWC, GST, etc., complete.

302

Mtr.

Providing and fixing approved quality Heavy Duty MS Bend conforming to IS 1239 (Part 2) of nominal bore 80 mm (3" dia), including cutting, threading, jointing, and welding. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate includes cost of MS bend, jointing materials, cutting/welding charges, all labour, T&P, transportation, LWC, GST, etc., complete

Nos.

Providing and fixing approved quality Heavy Duty MS Bend conforming to IS 1239 (Part 2) of nominal bore 100 mm (4" dia), including cutting, threading, jointing, and welding. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate includes cost of MS bend, jointing materials, cutting/welding charges, all labour, T&P, transportation, LWC, GST, etc., complete

Nos.

Making connection of MS distribution branch pipe to 100 mm (4") nominal bore main header line by providing and fixing Heavy Duty MS 'T' Joint conforming to IS 1239 (Part 2) [3" dia & 4"dia], including cutting, threading, and welding. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate includes cost of MS 'T' joint, cutting and welding charges, all labour, required jointing materials, minor T&P, transportation, LWC, GST, etc., complete

Nos.

Providing and fixing Gunmetal (GM) Single Landing / Hydrant Valve of 63 mm nominal size, ISI marked conforming to IS 5290, complete with blank cap, chain, and flanged/threaded jointing accessories. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate includes cost of GM hydrant valve, blank cap with chain, bolts, nuts, rubber washer/gasket, fixing, all labour, T&P, transportation, LWC, GST, etc., complete.

Nos.

Providing and fixing Heavy Duty Mild Steel (MS) companion flanges conforming to IS 6392 / IS 1239 for 80 mm (3") and 100 mm (4") nominal bore MS pipes, fittings, tees, and bends, including welding, alignment, and jointing with MS bolts, nuts, washers, rubber insertion gasket, and gasket shellac as required. The work shall be carried out as per the directions of the Engineer-in-Charge. The rate includes cost of MS flanges, MS bolts and nuts, rubber gaskets, jointing compound, gas cutting, electric welding electrodes, hire charges of welding equipment, all labour, T&P, transportation, LWC, GST, etc., complete

118

Nos.