REPAIR TO CHARPOY GI PIPE AND MISC FURNITURE ISSUED TO OTM/MD ACCN UNDER GE NORTH DELHI CANTT10

Amount

REPAIR TO CHARPOY GI PIPE WITH PLY TOP (FD-220)

S&F 12mm thick plywood commercial type BWR grade size 1950mm x 900mm x 12mm thick (in one piece only) as top of the charpoy GI Pipe with mild steel Screw bolt (Machine made) of size 75mm long, 6mm thick with hexagonal or square head at one end and screw the other with washer, including removal of old unserviceable ply top.complete all as per specified and directed.

M&L dismantling of existing unserviceable/broken long rail and S&F new long rail of GI pipe medium grade 32mm size bore duly ISI marked including threading at both ends complete all as specified and directed.

M&L dismantling of existing unserviceable/broken short rail and cutting of old long rail obtained from Srl No 1.02 to the required size for short rail including threading at both ends complete all as specified and directed.

Removing of old unserviceable legs of charpoy and S&F of new legs made out of old broken short rails retrieved from item Sr No 1.03 above by cutting and threading at one end and fixing 3mm thick base MS circular plates of 55mm dia duly painted at other end complete all as specified and directed.

S&F mild steel Iron strips 08 Nos of size 50mm x 6mm, 75mm long duly holed/drilled for tightening plywood and strip with countersunk screws/suitable nuts, bolts and washers and welded to rails of charpoys each side 02 Nos strips including two coats of synthetic enamel paint over a coat of red oxide/primer, complete all as directed. Note : One number of mild steel flat iron strip 50mm x 6mm x 75mm long is measured as one unit.

S&F flat mild steel iron 02 Nos of size 50mm x 6mm thick , 900mm long providing 02 Nos of holes /drilled in each flat iron for tightening plywood on flat iron along with longrail with countersunk screws/suitable nuts & bolts with washers on both sides of flat mild steel iron and including preparation of surface and applying two coats of synthetic enamel paint over a coat of red oxide/primer, complete all as directed. Note : One Number of MS flat iron strip 50mm x 6mm x 900mm long is measured as one unit.

M&L dismantling of existing unserviceable elbow GI three way and S&F new elbow GI three way suitable for GI Pipe med grade 32mm bore pipe complete all as specified and directed .

S&F in replacement of unserviceable check nut 6mm thick suitable for 32mm bore GI pipe charpoy of approved make complete all as specified and directed .

REPAIR TO TABLE COMPUTER WITH DRAWER 1346MM X 914MM X 504MM WISDOM STEEL (TP) :

Removing of unserviceable top of table computer in any positon, S&F new top made out of 18/19mm thick Ext grade MDF board of approved shade (ISI Marked) 4mm teak wood alround the edges with suitable screws.

Removing of unserviceable Bottom shelf of Table computer in any positon, S&F new bottom shelf made out of 18/19mm thick Ext grade prelaminated MDF board of existing shade(ISI Marked) to be fixed with suitable screws.

Removing of unserviceable telescopic channels in any position, S&F new steel telescopic channels with screws (ISI Marked). complete all as specified and directed.

All as per Srl No 2.03 here in before but key board tray of table computer complete all as specified and directed.

Repairs of damaged parts, scraping of existing coat of paints filing, finishing and painting of table computer with two coats of synthetic enamel paint of approved shade after giving a primer coat with red oxide with spray gun complete all as specified and directed.

REPAIR TO CHAIR REVOLVING MED BACK WITH ARMS CUSHIONED SEAT AND NET BACK WITH TILT MECHANISM (TP):

Dismantling of unserviceable Jali (Net) of back and S&F new Jali (Net) of approved quality & shade with fine finishing as per existing pattern complete all as specified and directed.

Labour for removing the existing worn out/ unserviceable seat of chair and S&F new seat upholstred with net duly finished, seat cushion made from moulded PU foam of 80mm thick 32 density as per existing shape and size complete all as specified and directed.

Labour for removing the existing worn out/ unserviceable net of seat of chair and S&F new net fabric of seat upholstred with net duly finished, as per existing shape and size complete all as specified and directed.

S&F in replacement of unserviceable Arm Rest of chair as per existing complete all as specified and directed.

S&F in replacement of unserviceable hydorlic system of chair as per existing complete all as specified and directed.

S&F in replacement of unserviceable pedestral assy with injection system in black as per existing shape and size to make the whole system serviceable complete all as specified and directed.

Dismantling of unserviceable rollers (wheel) of padestral system S&F new rollers of twin as per existing shape and size complete all as specified and directed.

REPAIR TO CHAIR VISITOR (TP) :

Dismantling of unserviceable Jali (Net) of back and S&F new Jali (Net) of back of chair of approved quality & shade with fine finishing as per existing shape and size/pattern and as directed.

Dismantling of unserviceable Jali (Net) of seat and S&F new Jali (Net) of seat of chair of approved quality & shade with fine finishing as per existing shape and size/pattern and as directed.

REPAIR TO CHAIR VISITOR REVOLVING GODREJ PC # H5002T (TP) :

Dismantling of unserviceable seat and S&F new 12mm TH hot pressed ply wood fully upholstred with rexine of approved shade and moulded Polyurethane foam with PVC liping all around as per existing shape and size and as directed.

Dismantling of unserviceable back and S&F new 12mm TH hot pressed ply wood fully upholstred with rexine of approved shade and moulded Polyurethane foam with PVC liping all around as per existing shape and size and as directed.

REPAIR TO BED HARD PLY TOP STEEL GODREJ (TP) :

S&F in replacement of unserviceable top of bed hard steel to be made of 12mm thick (7Ply) commercial plywood BWR grade, confirming to IS 303-1989 and ISI marked and to be fixed with appropriate sizes of SS nuts & bolts with washers without having any joints after tightening of frame by welding ply shape and size as per drg complete all as specified and directed.

M&L, scraping of existing coat of paints complete filling, finishing and painting of bed hard steel with two coats of synthetic enamel paint with spray after applying a coat of red oxide primer complete all as specified and directed.

S&F new PVC hard rubber Shoes as per drg or complete all as specified and directed.

REPAIR TO CHAIR VARANDAH JCOs/ORs (FD/MAP-II/05) :

S&F PVC seat & back 4mm thick wt not less than 1.85kg of seat & back and grooves 10 No on seat & back of size 90 x 10mm shall be used.

M&L with gas welding to broken components of steel frame so as to bring the whole item in serviceable condition, welding portion should be smoothed by grinder complete all as specified and directed.

M&L painting of chair steel frame with two coat of synthethic enamel paint of white shade after removing the rubber shoes and complete removal of existing coat of paint, including preparation of old surface by mild grinding, applying a primer coat of red oxide complete all as specified and directed.

S&F new PVC hard rubber shoes as per drg or complete all as specified and directed.

REPAIR TO TABLE DINING ORs OF ALLUMINIUM TOP (FD-165(M):

Dismantling of unserviceable top of Table S&F new top of table made up of 18/19mm block board of size 1900mm x 685mm best quality fixed with 22 guage of aluminium sheet with suitable screws on the top as per drg and as directed.

M&L with gas welding to broken components of steel frame so as to bring the whole item in serviceable condition, welding portion should be smoothed by grinder complete all as specified and directed.

M&L painting of steel frame with two coat of synthethic enamel paint of approved shade after removing the rubber shoes and complete removal of existing coat of paint, including preparation of old surface by mild grinding, applying a primer coat of red oxide complete all as specified and directed.

S&F new PVC hard Rubber Shoes as per drg or complete all as specified and directed.

REPAIR TO CHAIR CBA STEEL WITH ARMS (FD-75)

Labour for removing the existing worn out/ unserviceable seat of chair CBA steel and S&F new seat frame of size 460mm x 420mm made from commercial plywood 12mm thick and 50mm thick 32 D foam cushion, duly covered with cloth /rexine of approved quality and shade, duly stitched complete all as specified and directed.

All as per the description of srl item No 9.01 but for Back of Chair padded steel of size 460mm x 380mm

M&L for welding with 25mm x 3.0mm MS flat iron 510mm long with holes to fix Nuts and bolts to seat/back frame for fixing sheet/back frame including nuts complete all as specified and as directed for Chair CBA Steel (FD 75 (M)

S&F new PVC Caps complete all as specified and directed.

S&F new PVC arms as per sample, complete all as specified and directed.

Labour for scrapping down the old painted steel surface for carrying out repairs and filling with putty to obtain even surfaces applying primer to surfaces and applying two coats of synthetic enamel paint of approved shade by Engr-in-Charge over one coat of red oxide primer by spraying machine all as specified and directed.

M/s Kapil Furniture

M/S SUNIL TRADERS

M/s Makhan Lal

VARAROHA BUILDERS

M/s M M BAHL

M/S CHANDER SHEKHAR