COMPREHENSIVE MAINT AND PERIODICAL SERVICES TO CERTAIN UNIT OTM AND MD ACCN UNDER AGE B/R-II UNDER GE N BIKANER AT MIL STN BIKANER

Amount

Demolition of cement conc. In any description and inc any position not otherwise specially provided complete all as specified and as directed by Engineer in charge.

Dismanting floor, hearth or wall tiling including cement mortar bedding and removal of rubbish out of the premises as specified and as directed by Engineer in charge.

Taking down cement plaster on brick or stone walls, including raking out joints, hacking for key, scrubbing down with water etc as specified and as directed by Engineer in charge.

M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not execeeding 0.5 sqm in each pane for metal frames including hacking out old broken glass (any thickness, size, quality or description) complete as specified and as directed by Engineer in charge.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete (capacity of tanks 500 Ltrs & 1000 Ltrs ltrs) as specified and as directed by Engineer in charge.

M& L GI Tubing, medium grade galvanised, 15 mm bore with all fittings and fixed to walls and ceilings or laid in floors including taking up or down steel tubing 15 mm dia and connections and stacking neatly for offering credit as specified and as directed by Engineer in charge.

M& L GI Tubing , medium grade galvanised, 20 mm bore with all fittings and fixed to walls and ceilings or laid in floors including taking up or down steel tubing 20 mm dia and connections and stacking neatly for offering credit as specified and as directed by Engineer in charge.

S&F in GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm including taking up or down steel tubing 20 mm dia and connections and stacking neatly for offering credit as specified and as directed by Engineer in charge. complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fied of 25 mm as specified and as directed by Engineer in charge.

S & F in repair PVC valveless syphonic action type flushing cistern, 10 ltr capacity low level , white with inlet, ball valve, float and handle including brackets fixed in repairs as specified and as directed by Engineer in charge.

S&F in repairPVC connections 15 mm size with PTMT nuts of length 450 mm as specified and as directed by Engineer in charge.

S&F in repair Brass chromium plated WHB mixer non telephonic for mixing hot and cold water screwed down for iron pipe 15 mm bore complete all as specified and as directed by Engineer-in-Charge.

S&F in repair brass CP wall mixer non telephonic for mixing hot and cold water screwed down for iron pipe 15mm bore as specified and as directed by Engineer in charge.

M&L in repair Bib tap 15 mm dia long body , fancy type, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe and fixed as specified and as directed by Engineer in charge.

S&F in repair angle valve cast copper alloy fancy type CP with long shank and cup and screwed for 15 mm iron pipe fixed as directed by Engineer in charge. Cera cat Part No F8040204 or Equivalent

M&L in repair Pillar taps, 15mm dia, Chromium plated fancy type, Swan neck , cast copper alloy with capstan heads, screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe and fixedas specified and as directed by Engineer in charge.

S& F in repair Plastic water closet seat, any colour , closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device as directed by Engineer in charge.

S&F in repair health faucet with 1 mtr silver foil connection long tube and hook and knob all as specified and directed by Engineer-in-Charge.. Cera Cat part No F8030104AB and equivalent .

S&F in repair CP Waste coupling 32/40mm including waste pipe complete all as specified and as directed by Engineer in charge.

Attending the complaints of AGE B/R like fixing screws to tower bolt/Aldrop bolt/ stoppers,Handle/ Hings in respect of Easening of ( Steel/wooden/Aluminum) door/Windows of any description and size , by cleaning ,adjusting in position and making the same functional incl small repairs if reqd. with and incl greasing , oiling complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) size up to 4.00 sqm each as specified and as directed by Engineer in charge.

S&F 1.25 mm thick Pressed steel frames of size 125mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns as specified and as directed by Engineer in charge.

S&F 1.25 mm thick Pressed steel frames of size 105mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns as specified and as directed by Engineer in charge.

M&L Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube suppling & fixing in opening all as specified and as directed by Engineer in charge.

M&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bttom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, Panneling of plain color PVC sheet to be fitted in the MS frame welded /sealed to the stiles &rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site all as specfied and as directed.

M&L Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) One side Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by "RAJSHRI" an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and including automatic lock, disgner handle , stainless Steel piano hinges of required size with necessary full body threaded star headed counter sunk SS Screws ect fixed in repairs all as per direction of Engineer -In-Charge

M&L Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length etc fixed in repair complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

Taking down shutters of any description up to 2.00 Sqm each pane as specified and as directed by Engineer in charge.

S& F 35 mm thick Flush shutters for door solid core construction, with block board core, and ply wood face panels with lipping to match complete all as specified and as directed by Engineer-in-Charge.

S&F Second class hard wood, glazed and skelleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc without sash bar, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, size of members as directed supplied and fitted to chowkats as specified and as directed by Engineer in charge.

M&L Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints in repair as specified by Engineer in charge.

Providing and fixing in repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief

Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty/rubber gasket in square n exc 0.50 sqm in each pane for metal frames complete all as specified and as directed by Engineer in charge.

S&F in repair 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty/rubber gasket in square exc 0.50 sqm in each pane for metal frames complete as specified and as directed by Engineer in charge.

S&F Stainless steel wire cloth o.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples as specified and as directed by Engineer in charge.

S&F curtain rods, 20mm dia mild steel, chromium plated including brackets, stops etc and fixed in repairs as specified and as directed by Engineer in charge.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples as specified and as directed by Engineer in charge.

S&F in repair door closer of cast iron body, hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701mm to 850mm wide and of weight between 36 to 60 kg, ISI marked complete all as specified and as directed by Engr-in-charge.

S&F Butt hings, 100 mm long, extructed aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 as specified by Engineer in charge.

S&F Extruded aluminium alloy handles, 100 mm long, fabricated type anodisedas specified by Engineer in charge .

S&F Aluminium, anodised , 100 mm long, barrel tower bolts of extruded section and fixed as specified by Engineer in charge

S&F Aluminium alloy, anodised, sliding door bolt 300mm long, with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed as specified by Engineer in charge.

S&F in repair Butt hings, 100 mm long, extructed aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 as specified by Engineer in charge.

S&F in repair Extruded aluminium alloy handles, 100 mm long, fabricated type anodised as specified by Engineer in charge

S&F in repair Aluminium, anodised , 100 mm long, barrel tower bolts of extruded section and fixed as specified by Engineer in charge

S&F in repair Hasp and staple 100mm aluminium anodised, safety type, with mild steel hinges pin including bolt to hinge plate and fixed with screws as specified and as directed by Engineer in charge..

S&F in repair 75mm Aluminium mortice lock vertical type 4 lever complete all as specified and as directed by Engr-in-charge.

S&F in repair Mild steel, 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed in repair as specified and as directed by Engineer in charge.

M&L in repair 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of prime erected in position as indicated,complete: push pull or manual type as specified and as directed by Engineer in charge.

S&F in repair Ball bearing for rolling shutters as specified and as directed by Engineer in charge.

M&L Glazed ceremic tiles coloured 450X300mmX7mm/350x250x7 mm thick coloured,set and jointed in neat cement slurry and pointed in white cement or coloured to match colour matching with floor tiles as on vertical surfaces laid over 10mm thick renderind in CM in 1:4 as specified and as directed by Engineer in charge.

M and L for coloured Non skid ceramic tiles exceeding 0.11 sqm but not exceeding 0.18 sqm 7 to 8mm thick in floors set and jointed in neat cement slurry and pointed in coloured cement to match the floor laid over 15mm thick screed in cement mortar 1:6 as specified and as directed by Engineer in charge.

M&L light coloured Vitrified Ceramic tiles 10 mm thick (square /rectangular) area of each tile not exceeding 0.36 sqm, in floors on 15mm thick screeding in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete as specified and as directed by Engineer in charge..

M and L for18- 20mm thick granite (of any type) work in steps, jambs,pillars, window cills, cooking platforms and like in 20 mm thick screed bed cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of stone slab and tiles of any description or thickness in floor, apron etc laid bedded and pointed in any mortar as specified and as directed by Engineer in charge.

M & L PCC 25 mm thick 1:2:4 type B0 (12.50 mm graded aggregate) in any position in ground floor/roof complete all as specified and as directed by engr-in-charge.

M&L 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate finished even and smooth without using extra cement laid in panels complete complete all as specifed and as directed by engineer in Charge.

M&L for Fly ash Brick work with sub class ‘B’ old burnt brick , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 including demolition of brick work built in cement mortar including all quions arches pillars etc complete.

M& Lfor Rendering 10 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished fair and even as directed by engineer in charge.

M&L for Rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even as directed by engineer in charge.

M&L for Rendering 5mm thick on fair faces of conc. Surfaces in cement mortar 1:3,even and smooth w/o using extra cement as on ceiling.

Supply only liquid water proofing compound ISI Marked complete all as specified and as directed by Engineer-in-Charge.

M&L for preparing new surface of wood of any desc over 10cm width or girth and applying two coats of synthetic enamel paint .over pink primer as directed by engineer in charge.

M&L preparing new surface of steel of any desc over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide as directed by engineer in charge.

M&L Preparing the old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint as directed by engineer in charge.

M&L Preparing the old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint as directed by engineer in charge.

M&L for Preparing of old decorated surfaces of wall and applying one coat of distemper oil emuision with roller including applying white wall care putty for filling the undulations as required as directed by engineer in charge.

M&L for Preparing of old decorated surfaces of wall and applying two coat of distemper oil emuision with roller including applying white wall care putty for filling the undulations as required as directed by engineer in charge.

M&L for Preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer with roller , white or tinted complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparing of old decorated surfaces of ceiling and applying one coat of distemper oil emuision as specified and as directed by Engineer in charge.

M&L for Preparing new plastered surfaces of ceiling and applying three coat of white wash as directed by engineer in charge.

M & L for preparation of New surfaces of walls applying two coat of cement based paint of first quality by using over a coat of primer all as specified in manufacturers instruction all as specified and directed by Engineer in charge.

M & L for preparation of old surfaces of walls applying one coat of cement based paint of first quality as specified in manufacturers instruction all as specified and directed by Engineer in charge.

Taking down carefully (aluminium) point wiring complete of any type (batten/ surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or +F9:F16ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as spcified and directed. M & L for Modular point wiring with and including single core FRLSH PVC insulated and unsheathed stranded copper conductor cable of size 1.5 sqmm 1100 volts grade drawn through and including suitable size of PVC concealed conduit with accessories with laminated top cover fixed on MS sunken box for housing of switch, socket, regulator etc complete with and including 1.5 sqmm FRLSH PVC insulated and unsheathed stranded copper conductor cable as earth wire and connected to common earth dolly and making good to the disturbed surfaces of wall, floor, ceiling etc and making good to the disturbed surfaces of wall, floor, ceiling etc to match with exisiting surface complete all as specified and as directed by Engr-in-Charge as per following. Note :- (i) Cost of cutting/leaving forming chases for conduits, sinking for modular metal flush boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) The quoted rates of this item shall deemed to include for moduar metal flush boxes of requiste module and modular cover plates with frame of requisite module of colour as approved by GE. (a) One Light/fan/ex-fan point controlled by one switch.

(b) one socket point on the same board with other switch complete.

(c) One 3 pin 5 amps socket on independent board.

Ditto all as per item No-76 above but with 2.5 sqmm copper wire for 3 pin socket outlet 15 Amp on independent board complete and all as directed by Engr-in-charge.

Ditto all as per item No-76 above but with 4 sqmm copper wire for 3 pin socket outlet 15 Amp on independent board complete and all as directed by Engr-in-charge.

Ditto all as per item No 76 above but but one light point controlled by two 02 way switch board complete and all as directed by Engr-in-charge.

Taking down submain wiring Aluminium/ copper of any size including earth continuity condutor on teak wood or conduit and removing from site and making good the disturbed surface of wall etc complete all as specified and directed. M & L for submain (single phase) wiring complete with and including 6.0 sqmm single core,(FRLSH) fire retardant, PVC insulated and unsheathed multistranded copper conductor cable, 1100 Volts grade, drawn through Existing PVC conduit including accessories and fixed on walls and 6 sqmm, fire retardant, PVC insulated, multistranded copper conductor cable for earthing and connected to common earth dolly complete all as specified and as directed by Engr Note :- (i) Two runs of 6.0 sqmm PVC insulated wire and one run of 6 sqmm wire and one run of PVC conduit shall be measured as one unit length.

Ditto all as per item no 77 but submain (single phase) wiring complete with and including 6.0 sqmm two single core,(FRLSH) fire retardant, PVC insulated and unsheathed multistranded copper conductor cable, 1100 Volts grade, drawn through PVC concealed of suitable size including accessories and fixed on walls and 6 sqmm, fire retardant, PVC insulated, multistranded copper conductor cable for earthing and connected to common earth dolly complete all as specified and as directed by Engr-in-Charge.

Taking down old U/S existing DB any type including MCB/MCCB of any capacity and any size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed. S&F MCCB TPN DB,4 way Vertical type,440V,3 phase with rated busbar 200 Amps, double door type suitable for MCCB as a incomer and MCBs as out going double door type ,grouted in walls with Fixing arrangemant complete all as specified and directed. Make-Legrand cat No-5077 50 or equivalent in C&S,Havells, bentex.

Ditto all as per item no 78 above but double door, sheet metal enclosure, powder coated for MCB DB SPN 12 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991

Ditto all as per item no 78 above but double door, sheet metal enclosure, powder coated for MCB DB SPN 8 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge.

Ditto all as per item no 78 above but double door, sheet metal enclosure, powder coated for MCB DB SPN 4 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge.

S & F MCB SPN, 6-32 Amps , 240/415 volts, breaking capacity 16KA in replacement complete all as specified and as dircted by Engr-in-charge.

Ditto all as per item no 69 above MCB SP, 6-32 Amps , 240 volts, breaking capacity 10KA in replacement complete all as specified and as dircted by Engr-in-charge.

S&F MCCB 63 amps, 4 pole, 415 volts, fixed type breaking capacity 25KA in replacement complete all as specified and as directed by Engr-in-charge.

Ditto all as per item no 80 above but MCCB 100 amps, 4 pole, 415 volts, overload and Short circuit adjutable type breaking capacity 25 KA .

Ditto all as per item no 80 above but MCCB 125 amps, 4 pole, 415 volts, overload and Short circuit adjutable type breaking capacity 25 KA .

Ditto all as per item no 80 above but MCCB 63 amps, 3 pole, 415 volts, overload and Short circuit adjutable type breaking capacity 25 KA .

Ditto all as per item no 80 above but MCCB 100 amps, 3 pole, 415 volts, overload and Short circuit adjutable type breaking capacity 25 KA .

S&F switch Modular type, 6 Amp, 1 module single pole one way, 230 Volts complete all as specified and as directed by Engr- in -charge. Make-Havells SAP Code AHFSXXW061, Legrand Cat no- 679200, C&S Cat no- CG2011PWNR.

Ditto all as per item no 81 above but switch Modular type, 16 Amp, 1 module single pole one way, 230 Volts. Make-Havells SAP Code AHFSXXW161, Legrand Cat no- 679209, C&S Cat no- CG20573PWNR. .

Ditto all as per item no 81 above but Bell push Modular type, 6 Amp, 1 module single pole , 230 Volts . Make-Havells SAP Code AHRSBXW061, Legrand Cat no- 679229, C&S Cat no- CG20509PWNR.

S&F socket outlet 3 Pin 6/16 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge. Make-Havells SAP Code AHFKCXW163, Legrand Cat no- 679218, C&S Cat no- CG20352PWNR.

Ditto all as per item no 82 above but socket outlet 3 Pin 6 Amps modular type, 2/3 pin combined 2 module 230 Volts . Havells SAP Code AHFKPXW063, Legrand Cat no- 679235, C&S Cat no- CG20370PWNR.

supply and fixing fan step regulator modular type,120W -2 module electronic socket type five step controlled 230V AC 50 Hz for complete all as specified and directed by Engr-In-Charge. Make-Havells SAP Code AHLREFXW005, Legrand Cat no- 679241, C&S Cat no- CG20826PWNR.

S&F in repair modular white cover plate with frame but 1 module complete all as specified and as directed.

Ditto all as per item no 84 above but 2 module .

Ditto all as per item no 84 above but 3 module .

Ditto all as per item no 84 above but 4 module .

Ditto all as per item no 84 above but 6 module .

Ditto all as per item no 84 above but 8 module .

M&L single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified & directed by Engr-in-Charge. Make :- ABB/C&S/Legrand

S&F ceiling rose, surface backelite , three terminal AC, 230 volt complete all as specified & directed by Engr-in-Charge.

M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with LED bulb 9watt complete all as specified & directed by Engr-in-Charge.

Taking town and refixing LED tube light fitting, 20 watt/10 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified & directed by Engr-in-Charge

Taking down fan,sealing cable end,dismantling blades and removing fan and blades & refixing ceiling fan of any make, any sweep , keeping side in store in safe custody for painting of ceiling fan complete,in situ with synthetic enamel paint by spraying including filling cavities with filler,one coat after cleaning all dust and reassembling the fan complete including writing MES No at the site.

Taking down Exhaust fan,sealing cable end,dismantling blades and removing fan and blades & refixing Exhaust fan of any make, any sweep , keeping side in store in safe custody for painting of Exhaust fan complete,in situ with synthetic enamel paint byspraying including filling cavities with filler,one coat after cleaning all dust and reassembling the fan complete including writing MES No at the site.

Removing and refixing water heater storage type, puff insulation type of 25 ltrs capactiy and 1500 watts, BEE Star rated-5, with glass line inner shell with Hot & Cold pipe, water connection pipe, electric connection and necessary fixing arrangement complete all as specified and directed.

S&F decorative wall light, stainless steel, rust free fixture with white glass diffuser suitable for 09 watt led filament lamp base E27 complete all as specified and direceted by Engr-n-charge Make :- Havells Catpart No. LHFOAJD1TZ1I060 or equivallent make of Crompton/Philips

M&L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, earth electrode, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per all as specifed and directed.

General Note :- 1. Reapir and maintanace intimated to the contractor or his rep at any time day or night, through complaint slip or telephonically must be rectified by the contractor within 8 Hrs. If contractor fails to rectify the fault with in 8 Hrs a panelty of Rs 200 per day per complaint will be deducted till the fault/complaint is rectified. 2. All Material required for the repair and matainance work considered in the CA will be made available by the contractor with in 3 Hr. 3. Contractor will arrange two teams of electrician and helper inside of the cantonment for rectification of complaints 24/7 Hours through out the contract prrovision. 4. Contractor will deposit at least 90 % of material on immediate acceptance of the contract included in this contract in MES Store and same will be issued based on the complaint cell. 5. All item retrieved from replacement will be deposited to MES store and cost of same shall be included in quoted rate

S S CONSTRUCTION COMPANY (BID ID -3395749)

vikas builders (BID ID -3388115)

Durga Construction Company (BID ID -3386619)