Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.0 CrAccepted-AOC AT P O BACHRA P S PIPARWAR PIN 829201 | CHATRA | JHARKHAND | 829201 | ₹1.0 Cr | L1 | Accepted-AOC Quoted rate is 9.50 percent Above evaluated rate |
| 2 | L2₹1.1 Cr+₹2.4 L (2.28%)Rejected-Finance AT BOCM COLONY POST RAY P S KHALARI DISTT RANCHI JHARKHAND | RANCHI | RANCHI | JHARKHAND | ₹1.1 Cr+₹2.4 L (2.28%) | L2 | Rejected-Finance unsuccessful not being lowest bidder |
| 3 | Rejected-Technical AT PO CHINTA MANI NIWAS BESIDE CENTRAL SCHOOL RAJENDRA NAGAR COLONY PO HEHAL DIST RANCHI JHARKHAND 834005 | RANCHI | RANCHI | JHARKHAND | 834005 | - | - | Rejected-Technical Disqualified due to not replied against clarification sought. |
| 4 | Rejected-Technical | - | - | Rejected-Technical Disqualified due to not replied against clarification sought. |
| Sl No | Description | Qty | Unit | M/S D.K. ENTERPRISES L1 | M/S S K MISHRA AND SONS L2 |
|---|---|---|---|---|---|
| 1.01 | Preparationandconsolidationofsubgradewithpowerroadrollerof8to12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including makinggoodthe
undulationsetc.andre-rolling the subgrade and disposal of surplus earth with lead upto 50 metres. | 3,643.5 | Sqm | 140.49 ₹5,11,875.32 Lowest | 143.7 ₹5,23,570.95 |
| 1.02 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriageof mixed material by tipper stowork site, forallleads & lifts, spreading inuniformlayers of specified thickness with motorgrader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications anddirections of Engineer-in-Charge. With material conforming to GradeII(size range 53 mm to 0.075 mm) having CBR Value-25 | 546.52 | Cum | 2,859.48 ₹15,62,777.31 Lowest | 2,924.77 ₹15,98,459.92 |
| 1.03 | Providingandlayinginpositioncementconcreteofspecifiedgrade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1Cement :3 coarse sand (zone-III) derived from natural sources :6 graded stone aggregate 20 mm nominal size derived from natural sources) | 364.35 | Cum | 6,478.02 ₹23,60,266.59 Lowest | 6,625.92 ₹24,14,153.95 |
| 1.04 | Providingandlayinginpositioncementconcreteofspecifiedgrade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1Cement:1½ coarsesand(zone-Ili) derivedfromnaturalsources.3 graded stone aggregate 20 mm nominal size derived from natural sources) | 546.52 | Cum | 7,604.56 ₹41,56,082.15 Lowest | 7,778.18 ₹42,50,969.82 |
| 1.05 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns | 472.5 | Sqm | 287.49 ₹1,35,839.02 Lowest | 294.06 ₹1,38,943.35 |
| 1.06 | Manufacturing,supplyingandfixingretroreflectiveoverheadsignage boards madeupof 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heatactivate dretror eflective sheeting conforming to type-IIIofASTM-D-4956-01asapprovedbyEngineer-in- charge, letters, borders etc. as per IRC:67-2001insilverwhitewithblue
colour back ground and with high intensity grade, paste donsubstrate by pressuresensitive adhesive backing which shall be activated by applying
pressure conforming to class II of ASTM-D-4956-01and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with the ftresistant measures, including the cost of painting with two or more coats of epoxy painting reycolour on the back side of aluminium sheet including appropriate priming coat. Therate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge. (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).Overhead informatory road signage | 9 | Sqm | 5,309.66 ₹47,786.94 Lowest | 5,430.88 ₹48,877.92 |
| 1.07 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying apriming coat of approved steel primer all complete. | 603.3 | KG | 85.35 ₹51,489.78 Lowest | 87.27 ₹52,650.59 |
| 1.08 | Total impact of GST for the purpose of CTC | 1 | Nos | 15,88,701.08 ₹15,88,701.08 Lowest | 16,24,972.77 ₹16,24,972.77 |
Tender Value
₹95.1 L
EMD Value
₹1.2 L
Closing Date
29 Mar 2025, 11:00 amClosed
Staff Officer (Civil), PPR Area
GM OFFICE PPR AREA
Repair of colony road of post office colony and Ashok Vihar colony under GM Unit, Piparwar Area.
2025_CCL_332349_1
GM(PPR)/Civil/E-tender/2024-25 /3867
Open Tender
Civil Works - Roads
Item Rate
90 days
post office colony and Ashok Vihar colony
AS PER NIT
5 documents required · 5 mandatory
₹1.2 L
29 Aug 2025
13 Mar 2025
31 Mar 2025
14 Mar 2025
29 Mar 2025
14 Mar 2025
14 Mar 2025 - 25 Mar 2025
Amount
Preparationandconsolidationofsubgradewithpowerroadrollerof8to12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including makinggoodthe undulationsetc.andre-rolling the subgrade and disposal of surplus earth with lead upto 50 metres.
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriageof mixed material by tipper stowork site, forallleads & lifts, spreading inuniformlayers of specified thickness with motorgrader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications anddirections of Engineer-in-Charge. With material conforming to GradeII(size range 53 mm to 0.075 mm) having CBR Value-25
Providingandlayinginpositioncementconcreteofspecifiedgrade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1Cement :3 coarse sand (zone-III) derived from natural sources :6 graded stone aggregate 20 mm nominal size derived from natural sources)
Providingandlayinginpositioncementconcreteofspecifiedgrade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1Cement:1½ coarsesand(zone-Ili) derivedfromnaturalsources.3 graded stone aggregate 20 mm nominal size derived from natural sources)
Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns
Manufacturing,supplyingandfixingretroreflectiveoverheadsignage boards madeupof 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heatactivate dretror eflective sheeting conforming to type-IIIofASTM-D-4956-01asapprovedbyEngineer-in- charge, letters, borders etc. as per IRC:67-2001insilverwhitewithblue colour back ground and with high intensity grade, paste donsubstrate by pressuresensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with the ftresistant measures, including the cost of painting with two or more coats of epoxy painting reycolour on the back side of aluminium sheet including appropriate priming coat. Therate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge. (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).Overhead informatory road signage
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying apriming coat of approved steel primer all complete.
Total impact of GST for the purpose of CTC
M/S S K MISHRA AND SONS (BID ID -1144497)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .