SPECIAL REPAIR TO LT NETWORK AND ALLIED WORKS AT VARIOUS POCKETS AND ENHANCEMENT OF WATER TANKS AND CONNECTED PIPE LINES OF SINGLE OFFICER ACCN AT PAVANIKA OF HQ MAO AT AF STATION MUMBAI UNDER GE(AF)THANE

Amount

Excavation in trenches n. exc. 1.5 M in width and 1.5 M in deep for laying of cable and getting out in Soft / loose soil, complete all as specified and directed by Engineer-in_Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25 cm ,complete all as specified and directed by Engineer-in-Charge.

Removing excavated material n. exc. 50 M away, depositing as directed at level n. exc. 1.5 M above starting point complete all as specified and directed by Engineer-in Charge.

M&L for providing crushed stone sand cushioning to UG cable including punning down of sand in layers complete all as specified and directed by Engineer-in-Charge.. Note: Punned thickness only shall be measured.

Supply and laying unreinforced precast concrete cable cover factory made embossed the mark “LT CABLE” class LV type1 flat size 250x150x40 mm laid in trenches complete all as specified and directed by Engineer-in-Charge.

Taking down GI pipe laying in trenches for UG cable protection of any sizes pipe complete all as specified and as diercted by Engineer-in-Charge.

Supply and lay in trenches / along the wall / floor pipes GI light grade of size 50 mm with and including all fittings and accessories for cable protection complete all as specified and directed by Engineer-in-Charge.

Supply and lay in trenches / along the wall / floor pipes GI light grade of size 80 mm with and including all fittings and accessories for cable protection complete all as specified and directed by Engineer-in-Charge.

Taking down any sizes of of LT UG cable XLPE with aluminum conductor multistranded , PVC insulated and PVC sheeted heavy duty 1100 Volts grade under ground cable complete all as specified and as directed by Engineer-in-Charge.

Supply and lay cable XLPE Insulated armored, heavy duty electric power cables (heavy duty) 1100 Volts grade cross sectional area with stranded aluminium conductor of size 10 sq mm 4 Core complete all as specified and directed by Engineer-in-Charge.

Supply and lay of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in armored, heavy duty electric power cables (heavy duty) 1100 Volts grade cross sectional area with stranded aluminium conductor of size 16 sq mm 4 Core complete all as specified and directed by Engineer-in-Charge.

Supply and lay of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in armored, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 25 sq mm 3.5 Core complete all as specified and directed by Engineer-in-Charge.

Supply and lay of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in armored, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 35 sq mm 3.5 Core complete all as specified and directed by Engineer-in-Charge.

Supply and lay of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in armored, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 50 sq mm 3.5 Core complete all as specified and directed.

Supply and lay of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in armored, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 70 sq mm 3.5 Core complete all as specified and directed by Engineer-in-Charge.

Supply and lay of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in armored, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 95 sq mm 3.5 Core complete all as specified and directed by Engineer-in-Charge.

Supply and lay of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in armored, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 120 sq mm 3.5 Core complete all as specified and directed by Engineer-in-Charge.

Supply and lay of LT UG cable XLPE with aluminum conductor multistranded 1100 volts grade in armored, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 150 sq mm 3.5 Core complete all as specified and directed by Engineer-in-Charge.

Supply, install, testing and commissioning of factory made and CPRI tested outdoor type floor mounted on PCC Plinth. LT panel board cubicle type panel board suitable for 415 volts, 3 phase, 4 wire, 50 Hz AC supply system having bus bar chamber with air insulated PVC sleeved with heat shrink of colour code on copper bus bar of rating 350 Amps for phases and 250 Amps for neutral fixed on porcelain insulators. The panel shall be weather proof, dust and vermin proof IP-54 class protection and fabricated out of 3.0 mm CRCA sheet duly powder coated after seven tank process and pedestal of size 50 x 50 x 6 mm thick MS angle iron frame work. the panel shall be both front and back openable type adequate space all around acessories such as LT switchgear and measuring instruments on both sides including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade marked or PVC sleeved copper strips of appropriate size as per standard in practices and including comprising of followings acessorties all as specified and directed by Engineer-in-Charge. INCOMING (a) MCCB 415 Volts, 250 Amp, rating 4 Pole (triple pole and neutral), (Service Breaking Capacity 35 KA - 01 No (b) Digital volt meter 0-500 Volts-01 (c) Digital Ampere meter 0-100 Amps with and including CTs-01 No OUTGOING (a) MCCB 415 Volts, 125 Amp, rating 4 Pole (triple pole and neutral), (Service Breaking Capacity 25 KA - 02 Nos. (b) MCCB 415 Volts, 100 Amp, rating 4 Pole (triple pole and neutral), (Service Breaking Capacity 25 KA - 01 Nos. (c) Internal wiring of panel with stranded copper cable of suitable size (d) Neon phase indicating lamp(Set of three)-01 Set (e) Stenceling of pannel board including marking of distribuitions

Supply, install, testing and commissioning of factory made and CPRI tested outdoor type floor mounted on PCC Plinth. LT panel board cubicle type panel board suitable for 415 volts, 3 phase, 4 wire, 50 Hz AC supply system having bus bar chamber with air insulated PVC sleeved with heat shrink of colour code on copper bus bar of rating 350 Amps for phases and 250 Amps for neutral fixed on porcelain insulators. The panel shall be weather proof, dust and vermin proof IP-54 class protection and fabricated out of 3.0 mm CRCA sheet duly powder coated after seven tank process and pedestal of size 50 x 50 x 6 mm thick MS angle iron frame work. the panel shall be both front and back openable type adequate space all around acessories such as LT switchgear and measuring instruments on both sides including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade marked or PVC sleeved copper strips of appropriate size as per standard in practices and including comprising of followings acessorties all as specified and directed by Engineer-in-Charge. INCOMING (a) MCCB 415 Volts, 250 Amp, rating 4 Pole (triple pole and neutral), (Service Breaking Capacity 35 KA - 01 No (b) Digital volt meter 0-500Volts-01 (c) Digital Ampere meter 0-100 Amps with and including CTs-01 No OUTGOING (a) MCCB 415 Volts, 100 Amp, rating 4 Pole (triple pole and neutral), (Service Breaking Capacity 25 KA - 04 Nos. (b) Internal wiring of panel with stranded copper cable of suitable size (c) Neon phase indicating lamp(Set of three)-01 Set (d) Stenceling of pannel board including marking of distribuitions

Supply, install, testing and commissioning of factory made and CPRI tested outdoor type floor mounted on PCC Plinth. LT panel board cubicle type panel board suitable for 415 volts, 3 phase, 4 wire, 50 Hz AC supply system having bus bar chamber with air insulated PVC sleeved with heat shrink of colour code on copper bus bar of rating 500 Amps for phases and 350 Amps for neutral fixed on porcelain insulators. The panel shall be weather proof, dust and vermin proof IP-54 class protection and fabricated out of 3.0 mm CRCA sheet duly powder coated after seven tank process and pedestal of size 50 x 50 x 6 mm thick MS angle iron frame work. the panel shall be both front and back openable type adequate space all around acessories such as LT switchgear and measuring instruments on both sides including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade marked or PVC sleeved copper strips of appropriate size as per standard in practices and including comprising of followings acessorties all as specified and directed. INCOMING (a) MCCB 415 Volts,400 Amp, rating 4 Pole (triple pole and neutral), (Service Breaking Capacity 35 KA - 01 No (b) Digital volt meter 0-500Volts-01 (c) Digital Ampere meter 0-100 Amps with and including CTs-01 No OUTGOING (a) MCCB 415 Volts, 160 Amp, rating 4 Pole (triple pole and neutral), (Service Breaking Capacity 25 KA - 04 Nos (b) MCCB 415 Volts, 125 Amp, rating 4 Pole (triple pole and neutral), (Service Breaking Capacity 25 KA) - 02 Nos. (c) Internal wiring of panel with stranded copper cable of suitable size (d) Neon phase indicating lamp(Set of three)-01 Set (e) Stenceling of pannel board including marking of distribuitions

Supply, install, testing and commissioning of factory made and CPRI tested outdoor type floor mounted on PCC Plinth. AMF panel board cubicle with base frame AMF panel working on suitable for DG Set 82.5 KVA 440 volts, 3 phase, 50 Hz AC supply S/C and adj O/L E/F relief, UV cool along with electrical and mechanical interlocks. it shall be extendable at both ends, with copper bus bars, fully compartmentalized, dust proof and vermin proof, IP-54 class protection and fabricated out of 3.0 mm CRCA sheet duly powder coated after seven tank process and pedestal of size 50 x 50 x 6 mm thick MS angle iron frame work, the specification and having the following details; (a) Copper bus bar 3 phase 4 wire suitable for 600 Amp (b) AC/DC relay (c ) AC/DC timer (d) KWH meter (e) AMF Controllar including electrical wiring ( f) Power contactor 4 pole 250 Amps-02 Nos (g) O/L relay for DG set (h) MCCB FP 250 Amp 35 KA-03 Nos (j) Digital VAFPAF meter for mains and DG Set

Supply, install, testing and commissioning of factory made and CPRI tested outdoor type floor mounted on PCC Plinth. AMF panel board cubicle with base frame AMF panel working on suitable for DG Set 40 KVA 440 volts, 3 phase, 50 Hz AC supply S/C and adj O/L E/F relief, UV cool along with electrical and mechanical interlocks. it shall be extendable at both ends, with copper bus bars, fully compartmentalized, dust proof and vermin proof, IP-54 class protection and fabricated out of 3.0 mm CRCA sheet duly powder coated after seven tank process and pedestal of size 50 x 50 x 6 mm thick MS angle iron frame work, the specification and having the following details; (a) Copper bus bar 3 phase 4 wire suitable for 600 Amp (b) AC/DC relay (c ) AC/DC timer (d) KWH meter (e) AMF Controllar including electrical wiring ( f) Power contactor 4 pole 250 Amps-02 Nos (g) O/L relay for DG set (h) MCCB FP 250 Amp 35 KA-03 Nos (j) Digital VAFPAF meter for mains and DG Set

Supply, install, testing and commissioning of factory made and CPRI tested outdoor type floor mounted on PCC Plinth. AMF panel board cubicle with base frame AMF panel working on suitable for DG Set 75 KVA 440 volts, 3 phase, 50 Hz AC supply S/C and adj O/L E/F relief, UV cool along with electrical and mechanical interlocks. it shall be extendable at both ends, with copper bus bars, fully compartmentalized, dust proof and vermin proof, IP-54 class protection and fabricated out of 3.0 mm CRCA sheet duly powder coated after seven tank process and pedestal of size 50 x 50 x 6 mm thick MS angle iron frame work, the specification and having the following details;(a) Copper bus bar 3 phase 4 wire suitable for 600 Amp (b) AC/DC relay (c ) AC/DC timer (d) KWH meter (e) AMF Controllar including electrical wiring ( f) Power contactor 4 pole 250 Amps-02 Nos (g) O/L relay for DG set (h) MCCB FP 250 Amp 35 KA-03 Nos (j) Digital VAFPAF meter for mains and DG Set

S&F Cable jointing kit for 1100V (Earthed) grade cable for straight through joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 50 to 95 sqmm complete all as specified and directed by Engineer-in-Charge.

M&L for cutting existing road/hard standing not exc 50x60 cm in wide & depth getting out excavated material for laying GI tube , for passing through LT cable, returning filling & well rammaing watering finish suraface 10 cm from top using PCC 1:3:6 including removal of surplus soil complete all as specified and directed by Engineer-in-Charge.

M & L for maintenance free chemical Gel based earthing,vGI pipe Pipe having 75 mm dia 3 mtr long with 25 Kg back fill compound all as required at site including testing on completion and taking down of old earthing all as directed by Engr in-Charge including FRP cover of suitable size Note : (a) Earth resistance of earth pit should be less than 1.0 Ohms on testing after completion. If the desired earth resistance is not obtained the earthing will be redone at no extra cost.

Supply and fix in replacement FRP cable looping box of size 250mm x 150mm x 100mm With connector block 4 Way , 1 Nos of MCB SP 6 Amp 10KA, etc including suitable Brass gland, including provision for connecting earth continuity conductor etc. all as specified and directed by Engineer-in-Charge.

Demolation of Cement concrete in ground floor and paving exc 15 cm thickness but above ground level including removal all as specified and directed by Engineer-in-Charge.

M&L for PCC (1:3:6) type B1 (using 20 mm graded stone aggregate as in sub base to floor 100 mm thick finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Supply and in repairs MCCB DB verticle type made of sheet steel , powder painted with nuetral bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 way Double door all as specified and directed by Engineer-in-Charge.

Supply in repair MCCB DB verticle type made of sheet steel , powder painted with nuetral bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 8 way Double door ,all as specified and directed by Engineer-in-Charge.

Taking down any type any breaking capacity MCCB complete all as specified and as directed by Engineer-in-Charge.

S & F in replacement MCCB 415 volts grade with adjustable short circuit and over load of following rating all as specified and directed by Engineer-in-Charge.

(a) 63 Amps, 25 KA, 3 Pole

(b) 100 Amps, 25 KA, 3 Pole

(c) 125 Amps, 25 KA, 3Pole

(d) 160 Amps, 36 KA, 3 Pole

(e) 200 Amps, 36KA, 3 Pole

(f) 250 Amps, 36 KA, 3 Pole

(g) 400 Amps, 36 KA, 3 Pole

M&L for MS chequered plates Fe 410-W (Gde E- 250) Quality 'A' of not less than 6 mm thick of sizes as per site requirement incl cutting , welding of strip on the edges for proper fixing and provn of handles for lifting & fixing arrangement as shown & directed.incl taking out the old & unserviceble chequered plates all as directed by Engineer-in-Charge.

Material and Labour for repairing of LT Panel of not exc of sizes 2.5 Mtr x 2 Mtr x 0.80 Mtr doors/shuttering to welding and bracing of hinges, tinkering, and replace worn out rusted unserviceable doors/compartment shutters front sides and back side lock system including replace worn out rubber gaskets/feeding of compartment doors/shutters, decorbonising of all cable terminals, Busbars (R,Y,B &N) aluminium/copper cleaning inside of panel housing with help of air belower heavy duty complete all as specified and directed by Engineer-in-Charge

Material and Labour for repairing of LT Panel of not exc of sizes 2 Mtr x 1.5 Mtr x 0.80 Mtr doors/shuttering to welding and bracing of hinges, tinkering, and replace worn out rusted unserviceable doors/compartment shutters front sides and back side lock system including replace worn out rubber gaskets/feeding of compartment doors/shutters, decorbonising of all cable terminals, Busbars (R,Y,B &N) aluminium/copper cleaning inside of panel housing with help of air belower heavy duty complete all as specified and directed by Engineer-in-Charge

Material and Labour for repairing of feeder pillar box of not exc of sizes 2 Mtr x 1.5 Mtr x 0.80 Mtr doors/shuttering to welding and bracing of hinges, tinkering, and replace worn out rusted unserviceable doors/compartment shutters front sides and back side lock system including replace worn out rubber gaskets/feeding of compartment doors/shutters, decorbonising of all cable terminals, Busbars (R,Y,B &N) aluminium/copper cleaning inside of panel housing with help of air belower heavy duty complete all as specified and directed by Engineer-in-Charge

Supply in repair LED indication lamp for indication of (R,Y,B) 230 Volts including connections and taking out unserviceable indication Lamp complete all as specified and directed by Engineer-in-Charge.

Supply in repair Volt meter 0-500 Volt digital type including connections and taking out unserviceable Volt meter complete all as specified and directed by Engineer-in-Charge.

Supply in repair Ampere meter 0-400Amps digital type including connections and taking out unserviceable Ampere meter complete all as specified and directed by Engineer-in-Charge.

S&F copper cable flexible PVC insulated 3 x 2.5 sqmm single core along with earth wire in PVC conduit from FRP box to street light fitting ,including aluminium flat clampt 25 X 4 mm -03 Nos with suitable nuts,bolts and washers etc all as specified and directed by Engr-in-Charge

Supply in repair LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp all as specified and directed by Engr in charge.

Supply in repair LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp all as specified and directed by Engr in charge.

Supply in repair post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.all as specified and directed by Engr in charge.

Dismantling water tanks and removing to store complete all as specified and directed by Engineer-in-Charge.

S & F for Rotational moulded polye-thylene water storage tanks capacity of 500 ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I , complete all as speified and directed by Engineer-in-Charge.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re- fixing or removal to store

Taking up or down25-32 mm bore steel tubing and connections, including cleaning for re- fixing or removal to store

Supplying and laying of 20mm outer dia ,CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer-in-charge.

Supplying and laying of 25 mm outer dia ,CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer-in-charge.

Supplying and laying of 32 mm outer dia ,CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer-in-charge.

Supply and fixing for 20 mm outer dia, CPVC pipe fitting for BALL VALVE complete all as specified and directed by Engineer in-Charge.

S & F in repairs for 20mm bore Ball valves high pressure of PTMT epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 g m s . / 25mm-455gms/ 40mm- 690 gms) complete all asspecifiedand directed by Engineer-in-Charge.

S&F Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings for any position at the height of 10 to 15 mtr ht including all safty measures, complete all as specified and directed by Engineer-in-Charge.

S& F for Rolled sections with FRW or induction butt welded MS tube black conforming to IS 1161-1979 grade Yst 240 as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates , complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of new steel and iron Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed by Engineer-in-Charge.

S & F for 20mm dia bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed by Engineer-in-Charge.

M/S KHUSHI ENTERPRISES (BID ID -3250650)

Vinod Enterprises (BID ID -3256961)