EDCH-76/2024-25

Amount

Safe Carriage of following material from Electricty store center Hts to Pit site of work through the Kacha and Pakka road including loading and unloading at the respective ends including the cost of arrangement of labour, T&P, etc. which required for proper completion of work.(Distance 00-50 Kms.)

8.5/9 Mtr. long PCC Poles.

9/11 Mtr. S.T. Poles

ACSR Weasel conductor

Earthing Complete

Shackle Insulator

Stay Set Complete

Teoff Channel

33/11 KV Pin Insulator with Pin

Disc Insulator with Disc Fitting

F Bracket

11 KV X-Arm

50/95/120 sqmm. AB Cable

Suspension Clamp

Dead End Clamp

Distribution Box with clamp

Pearcing Connector

Guarding Angle with Clamp

G.I Wire 6/8/10 SWG

Neutral Cum Earth Wire

Cable Jointing Kit

11 KV XLPE cable

Errection of following Poles including Cutting of kharanja/mettalic road/concrete portion while digging pit & complete H.T./L.T. fittings as per RESPO manual and as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.

PCC poles 8.5/9 Mtr.

STP 9.0/11 Mtr.

Errection and grouting of stays as per RESPO Norms and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.

Fixing of earthing rod as per RESPO Norms and as per direction of supervising engineer.

Laying, sagging and stringing and jumpering / binding etc. of new & old ACSR Weasal conductor / GI in 11 KV / LT lines as per RESPO manual and as per direction of supervising engineer.

ACSR Weasal conductor

50/95/120 sqmm. AB Cable

XLPE Cable

Providing & Fixing of Following Clamps

11 KV X Arms Clamps for STP/PCC Pole

Nut,bolt & Washer

11 KV F Clamp for STP/PCC Pole

Earthwire Clamps

LT Clamp with Nut & Bolt

Cutting, chopping, triming of tree branches to clear the line route to give 2 mtr. horizontal and vertical clearance to the line coming in the route of different feeders as per direction of supervising engineer

Guarding/Reguarding of 11 KV line by laying, stringing, sagging and binding of 2 Nos. parallel GI wire 6 SWG after providing, fabrication and fixing of guarding angle and fabrication and fixing of X-guards (Tillis) of GI wire at distance of 3 Mtr.

Installation of extra ''T'' on the erected poles wherever required alongwith all fitting as per direction of supervising engineer including the cost of labour, T&P etc, required for proper completion of work. The "T" pole shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of material.

Dismentlling and removal of existing Line from the various area

Dismentlling Of Pole STP/PCC

Back Cartage

ACSR Weasel Conductor Scrap

Iron Scrap

SUMIT ENGINEERING (BID ID -4753736)

S.K. CONTRACTOR (BID ID -4751797)

R.N. ELECTRICAL WORKS (BID ID -4751357)

Bobby Electricals (BID ID -4748730)