MISC REPAIR TO DRAIN, COMPOUND WALL, FENCING, HARD STANDING, ETC., AND COMPREHENSIVE REPAIR, MAINT TO FLOORING, PLASTERING AND ROOFING IN CERTAIN BLDGS IN AGE BR-I AREA UNDER GE SAUGOR

Amount

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 including demolition of brick masonry, built in cement mortar incl all quoins, arches, pillars, etc and removing of rubbish off the premises complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15cm below or above ground floor and removing rubbish from site complete all as specified and directed

Demolition of reinforcement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40 mm graded stone aggregates) in foundations, filling and mass concrete including demolition of cement concrete of any description and in any position complete all as specified and directed.

M&L for RCC (Design Mix) M-25 (using 20mm graded stone aggregates) as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc basement slabs, under reamed plies and mass concrete

M&L for RCC (Design Mix) M-25 (using 20mm graded stone aggregates) as in columns, pillars, piers,posts and struts and the like complete all as specified and directed.

M&L for RCC (Design Mix) M-25 (using 20mm graded stone aggregates) as in Beams, cantilevers, bressummers, lintels over 1.5m span and the like complete all as specified and directed.

M&L for form work to sides of concrete foundation , footings .base of columns,sides and soffits of plinth beams and similar works as in rough finshed flat surface complete all as specified and directed.

M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular rough finished complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams,lintels,shelves and similar works as in rough finshed flat surface complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to lenth, bend to shape required, including cranking, bending, sprially for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed..

M&L for MS TMT bars 5mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed. .

M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on fair faces of brick /concrete surfaces finishing the surfaces even and smooth with out using extra cement complete all as specified and directed

M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on otherthan fair faces of brick / Concrete surfaces finishing the surfaces even and smooth without using extra cement etc complete all as specified and directed and directed.

M&L for 10mm thick rendering on cement mortar 1:4 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed

M&L for prepration of newly plastered wall sufaces & applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed . Make:- Asian ACE or equivalent make as approved by GE

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brick work, masonary, etc and making good disturbed ground complete all as specified and directed.

Dismantling of fencing wire mesh of any type complete all as specified

Excavating in post holes in any type of soil each not exc 0.5 cum , getting out and removing surplus soil to a distance not exc 50 m and making good surface complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregates) as in foundation, filling, mass concrete, sub-floors, floors, etc., complete all as specified and directed.

S&F mild steel angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire , etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling bolting or riveting, etc, and similar work and similar conforming to Fe-290, Gde E-165 complete all as specified and directed.

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required, includinig cranking, bending spirally for hooping of columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips quality confirming to Fe-410 W complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or sguare heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or screw nut n.exc 5 cm long dia of shank 12 mm complete all as specified and directed.

S&F chain link MS galvaised fenccing of any size or type including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. Make:-TATA/SAIL/JINDAL

M&L for painting steel surfaces exc 10 cm in width or girth with two coats of synthetic enamel paint over a coat red oxide primer including preparation of surfaces complete all as specified and directed.

M&L for preparation of newly steel and iron surfaces of any description n.exc 10cm in width or girth when connected with other painting, applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

S&F in replacement galvanised 2 strand steel barbed wire 2.24mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel wire, staples or steel pins, etc. complete all as specified and directed (Note:-Each line wire to be measured). Make:-TATA/SAIL/JINDAL

Surface exacavation not exceeding 30cm deep and average 15cm deep and getting out in soft/loose soil complete all as specified and directed

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregates) as in coping, benching to hold to lower portion of chain link fencing etc including nesessary formwork complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floor of pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for hardcore of gauge not exc 63 mm, with broken stone or boulderes deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface complete all as specified & directed.

M&L for machine pressed precast cement concrete coloured chemically treated rubber moulded interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658 - 2006 of 60mm thick, M-35 grade, laid over and including stone dust cushion of 40 mm thick complete all as specied and directed.

Dismantling unframed timber scantlings 40 sq. cm & over in section, in any position complete all as specified and directed.

S&F structural steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc., complete all as specified and directed.

S&F mild steel plates (plain or chequered) channels square cut to or notched forming holes with riveted bolted or welded attachment for Fe-410W complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5cm & n exc 30cm long dia of shank 16mm to 20mm complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, trapozoidal pattern with guard film of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws including dismantling old plain or corrugated asbestos sheeting , any gauge, thickness complete all as specified and directed.

S&F 0.50 mm thick galvalume sheet precoated coloured Profile ridge ,fixed with self driving screws including dismantling of GI sheets ridge complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removing rubbish from site complete all as specified and directed

M&L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / Concrete surfaces of finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed

M&L for preparing the new plastered surfaces and applying three coats of white wash on walls complete all as specified and direcrted.

M&L for preparing the old decorated surfaces and applying two coats of white wash on walls complete all as specified and direcrted.

M&L for prepration of new wall surfaces & applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making of 'V' shaped crakes and filling of all crakes with crakes seal of walls and applying two coat of interior emulsion distemper over a coat of wall primer incl. preparation of surfaces of walls etc complete all as specified and directed.

M&L for applying one coats exterior weather coat including preparation of surfaces of old walls etc complete all as specified and directed Make:- Asian Ace or equivalent make as approved by GE

M &L for Applying three coats of white wash on new plastered ceiling surface including preparation of surface complete all as specified and directed.

M &L for Applying two coats of white wash on old decorated ceiling surface including preparation of surface complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregates) as in plinth protection 75mm thick finishing cement concrete surfaces finished even & smooth without using extra cement joints to be filled with sealing compound grade 'A' complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) as in mass concrete as in foundation filling and mass concrete complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in sub base of floor to receive tiles or Kota stone complete all as specified and directed

Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding and rubbish off the premises, all as specified and directed..

M&L for glazed coloured ceramic tiles of size 450mmx 300mm x 7 to 8mm thick , joint free (rectified) on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed .

M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.18 sqm and n. exc. 0.36 sqm as in floor set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.18 sqm and n. exc. 0.36 sqm as in skirting, dado & jointed in neat cement slurry and pointed in white cement mixed with pigment to match laid over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed

M&L for 600mm x 600mmx 8mm to 10mm thick coloured Vitrified tiles in floors set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the tiles laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 600mm x 600mm x 8mm to 10mm thick coloured vitrified tiles in Skirting , dado & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the tiles laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for coloured designer tiles exterior grade ( ENDURA or equivalent ) 10 mm thick laid over and including 15 mm thick screed bed in CM(1:6) set and jointed in floor and pointed in neat cement slurry with grey cement and pigment in floor complete all as specified and directed.

M&L for 18mm to 20mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like laid over and including 15mm thick cement mortor 1:4 set jointed in neat cement slurry with fastners including pointing in white cement mixed with pigment to match shade of the slabs complete all as specified and directed.

M&L for rounding/ chamferring to edges of stone slabss one edge , such as in steps , cooking plateform and other similar situations complete all as specified and directed.

S & F GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24 x 38 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and incl S & F white Non Asbestos designer ceiling cement boards 4 mm thick including demolition of existing ceiling boards (fiber, pulp, insulation, etc.) or insulation board/slabs/blankets, any thickness, including frames complete all as specified and directed.

M&L for complete removal of existing treatment on wall and preparation of old surfaces & applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making of 'V' shaped crakes and filling of all crakes with crakes seal of walls and applying two coat of interior emulsion distemper over a coat of wall primer complete all as specified and directed.

dipangashu barick and associates

m/s mohansingh

HAFEEZ CONSTRUCTION

maharaja construction and suppliers

v k builder