Repairs to Drain, Footpath, Hardstanding, Compound wall, Fencing, Gates and Retaining wall etc under AGE B/R-I of GE Brichgunj, Port Blair.

Amount

Dismantling of fencing wire mesh any size and description complete all as specified.

Dismantling wrought iron or mild steel of any description not otherwise provided for complete all as specified and directed.

Dismantling of posts or struts (wood, steel or RCC) of any section along with old, unserviceable barbed wire, if any, including taking out embedded portion from ground and making good disturbed ground complete all as specified and as directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out in Hard/dense soil returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm watering and removing surplus soil to a distance not exceeding 50m and making good surfaces complete all as specified and as directed.

M&L for PCC 1:3:6 type C2(using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

Providing reinforced cement concrete type B-1, 1:2:4 (20mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc for fencing, average sectional area exc 100 Sq cm, but not exc 250 Sq cm with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed

M&L for PCC 1:2:4 type B-I (using 20mm graded stone aggregate) as in leveling course complete all as specified and as directed.

M&L for high strength corrosion resistant TMT bars 10mm dia and over cut to length, bent to shape required including cranking and bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia) or securing with clips complete all as specified and as directed.

All as per item No 8 here in before but 5 to 10 mm dia as in stirrups, spacer etc complete all as specified and as directed.

Supply only PVC coated (1mm thick) chain link fencing exc 2.00 but n.exc 3.50 kg per sqm with size of mesh 50 x 50 mm and thickness of wire n.exc 2.83 mm all as specified and as directed.

Fixing only PVC coated chain link fencing including fixing of line wires any mesh, size and any type of standards, rails, straining bolts etc including provision of binding wires complete.(Supply of MS line wire and flat iron bolt & nuts measured and paid seperately) all as specified and as directed.

Supply only 6mm dia wire PVC coated for support/line wire to chain link fencing complete all as specified and as directed.

Supply only mild steel angles, bars, flats etc as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and as directed.

Supply only mild steel bolts with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5 cm long n.exc 10 cm long dia metre of neck exceeding 11 to 15 mm complete all as specified and as directed.

M&L for preparation new steel surfaces of any description exc 10cm width or girth when unconnected with other painting or when painted in a different tint, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for preparation new steel surfaces of any description n.exc 10cm width or girth when unconnected with other painting or when painted in a different tint, and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe.415.Gde-E-250 complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

M&L for 75mm thick cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) in sub base of flooring/hard standing,Path way all as specified and as directed.

M&L for 50mm thick cement concrete type B2,1:2:4 (using 20mm graded stone aggregate) finishing the surface even and fair complete all as specified and as directed.

Dismantling of floor, or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premishes.

M&L for Chequerred cement concrete tiles 300x300x25mm thick size set, jointed and pointed in neat cement slurry incl 15mm thick in CM 1:6 bedding layer of mortar all as specified and as directed.

M&L for Heavy duty Vitrified tiles of size 300x300x8 to10mm thick or high dimension (except thickness) of any colour any design durastone weather proof impacr resistant abrasion resistant exterior tiles as in floors etc set and jointed in neat cement slurry over and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Supply and spread sand, 50mm thick as cushioning for paver blocks etc, all as specified at site all as specified and as directed.

S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS standards of 60mm thickness, M-35 grade, laid over with grey cement and pigments all as specified and as directed.

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed.

M&L for providing cement concrete Type B1, 1:2:4 (using 20mm graded aggregate) as in kerb including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Excavation in trenches n.exc 1.5m and n.exc 1.5m in depth for foundation and getting out in soft/ loose soil.

Demolition of PCC Block walling built in CM 1:6 complete all as specified and as directed.

M&L for precast cement concrete solid block masonry with solid blocks using PCC 1:3:6, type C1 (using 20mm graded stone aggregate), exc. 10cm in width, set in CM 1:4 all as specified and as directed.

All as item no 31.00 here in before but except blocks.

M&L cement concrete in surface channels and drains type C2 1:3:6 (40 mm graded aggregate) all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete all as specified and as directed.

Demolition of reinforcement cement concrete for floors similar work including removal of all demolished material form site complete all as specified and as directed.

Pre-cast RCC slabs for covers over drains using Reinforced Cement concrete 1:2:4, type B1 (20 mm graded aggregate) set in cement mortar 1:4 all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Taking down cement plaster of any desciption from wall (drain) including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed

M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick work/block masonry or concrete surfaces finished fair and even complete.

M&L 15mm thick cement plaster on fair faces of PCC block work or concrete surfaces in CM (1:4) and finished even and fair without using extra cement, complete all as specified.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25mm thick (soft/loose soil)

Removing excavated soil exc 250 mtr but n.exc 500mtr and depositing where directed by Engr-in-Charge.

Demolition of Concrete of any description and in any position not otherwise specifically provided

M & L for reinforced cement concrete type B1, 1:2:4 (20mm graded aggrigate) grade M-20 in walls or retaining walls, any thickness, size or shape including attached pilasters, buttresses all as specified and directed

Use & waste of Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter.

M&L cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate in coping of wall as specified and as directed.

S&F in repair galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm specing and straining and fixing to any type of standard rail straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed (Each line wire to be measured).

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer on walls all as specified and directed.

M&L for two coats of weather proof exterior acrylic emulsion paint with anti fungal property on newly plastered wall surfaces over a coat of primer including preparation of surface etc complete all as specified and directed.

B.R. ENTERPRISES

SKV Engineering

M/s Ramesh Lal

M/s S A Traders

S K ENTERPRISES

CHANDER SEKER ENTERPRISE

Nirman Construction Company