59/EDC(H)/2025-26

Carriage of Material from E.S.C. Hardoi Dump site Including loading & unloading and proper stacking

PCC Pole 8.5 Mtr. Long

STP Pole 11 mtr. long

ACSR Weasel Conductor

ABC Cable (3×50+1×70+1×16) sq.mm

ABC Cable (3×95+1×70+1×16) sq.mm

V-Type Cross Arm with holding clamp

11 KV Pin Insulator with pin & nut

Stay Set Complete

Earthing Complete

11 KV Disc. Insulator T&C with fitting

G.I. Wire

D.B. Box with clamp

Erection of PCC Pole 8.5 meter long single pole with all accessories. All required material shall be supplied by the contractor Expect pole, pin insulator /disc insulator.

Erection of PCC Pole 8.5 meter long double pole with all accessories like clamp,nut,bolt etc.(clamp,nut bolt and other necessary items provided by the contractor expect PCC pole).

Erection of STP Pole 11.00 meter long single pole Expect pin insulator /disc insulator all material supply by the contractor.

Erection of STP 11.0 mtr Long double pole with all accessories like clamp, nut, bolt etc.(clamp,nut bolt, MS Channel, T-off Channel, Stone Pad, Dropper Channel, Sub Station Base Angle & other necessary items provided by the contractor expect STP pole)

Concreating of pole

Dissmentling & mounting of 10/25 KVA T/F on Single/Double Pole with all accessories. All required item shall be provided by the contractor expect pole and T/F.

Dissmentling & mounting of 63 KVA T/F on Double Pole with all accessories. All required item shall be provided by the contractor expect pole and T/F.

Providing Chemical Earthling of Existing transformer with Pipe 3 Meter Long, 14/17mm Dia, Copper Clad Steel Earth Electrodes 250 Microns Copper Coating Thicknes Earth Pit Chamber. All Connection to be done by GI Strip With Proper Dressing and Nut Bolt. No material Shall be Provided By Department

Dissmentling & Shifting of 250 KVA T/F on Newly constructed plinth with all accessories. All required item shall be provided by the contractor expect pole and T/F.

Construction of T/F plinth of size 2×2×1.5 mtr on a padding 0.25 Mtr deep in ground 1:5:10 cement sand and brick ballast on the top of padding brick work Ist class brick of 0.95 mtr height & 0.35 mtr wall will be constructed. Rest wall should be 0.23 mtr thick. Brick work in ratio 1:4 cement & cores Sand in the hollow portion the sand should be filled from the ground level upto 15 centimeter below from the top of wall, Cement, sand & brick Ballasts should be filled up to 15 centimeter.

Construction of retaining wall, fabrication & erection of Wire mesh fencing of size 3 + 3 & 2.0 M height around Transformer and Distribution Pillar Box with retaining wall & 1 no. gate with locking arrangement made of MS Angle iron of size 50x50x6 mm jointed with nuts and bolts. The panel must be supported with MS Flat of size 50x6 mm. Wire mesh of size 10 SWG rectangle type, as per norms of RESSPO. (All the material will be arranged by the contractor at his own cost).

Supply & fixing of danger board

Fixing of Distribution box 3 phase. (All the required material shall be supplied by the contractor expect D.B. Box)

Stringing & Sagging ABC Cable of size (3×50+1×70+1×16) sq.mm with all accessories like eye hook, dead and clamp. All material Supplied by the contractor expect ABC cable 3×50+1×70+1×16 sq mm.

Stringing & Sagging ABC Cable of size (3×95+1×70+1×16) sq.mm with all accessories like eye hook, dead and clamp. All material Supplied by the contractor expect ABC cable 3×50+1×70+1×16 sq mm.

Fixing of Earthing Rod complete with all material. (all material supplied by the contractor. Expect Earthing Rod)

Grouting and Nozzling of 11 KV stay set complete including fixing of necessary clamps. Accessories required including its grouting by civil material (sand, brick blast & cement). All material shall be supplied by the contractor.

Stringing & Sagging of 3Ø 11 KV line ACSR Weasel Conductor

Cutting of tree branches

Dismentling & carriage of old Existing line (approx. 12.50 Km.) with pole and other materials from site to Store/JE dump site

Please Enable Macros to View BoQ information