Construction of 4 No. Type-I residential quarter for Cattle Sanctuary at Vill. Handa Kundi, Nalagarh, Distt. Solan (HP).

Amount

Excavation in foundations, trenches etc. in earth work in all kind of soil lift upto all height.stacking the excavated soil in all distance. Clear from the edge of the into plinths, sides of foundations etc. consolidating Nos. deposited layers by rammeing and watering and then disposing of all surplus excavated earth as directed within a all leads and lifts in all kind of soils.

Providing and laying cement concrete 1:6:12 (1cement :6sand :12 graded stone aggregate 40mm nominal size) and curring complete excluding the cost of form work in foundation and plinth

Brick work using common burnt clay building bricks in foundation and plinth in cement mortor 1:6 (1cement :6sand) Ist class bricks.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30 x 30 x 5mm so as to give a fair finish including centering,shuttering strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4mtrs. In all floors and heights and removal of the same for in-situ reinforced concrete and plain concrete work in:- a) Foundation, footings basis of columns etc. and mass concrete.

b) Beams, cantilevers, girders and lintels, sides of soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1mtr. In depth in all heights from floors.

c) Columns, pillars, posts and struts, Square, rectangular or polygonal in plan.

d) Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. upto 200mm in thickness.

e) Stair cases with sloping or stepped soffits excluding landing

f) Edges of slabs and breaks in floors and walls Under 20cm Wide.

Providing and laying reinforced cement concrete 1 : 1.5 : 3 (1cement : 1.5 sand : 3 graded stone aggregate 20mm nominal size) proporationally by weight with 43 grade cement @400 Kg/Cum minimum M-20 grade and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in and mixing with mechanical mixer and vibrator. as per HPPWD specification with updated BIS norms. a)Foundation, footing bases of columns and the like and mass concrete.

b) Columns, pillars, posts and struts upto all floor level.

c) Suspended floor, roofs, landing and shelves and their supports balconies beams, girders, bressumers and cantilever upto all floor levels

d) Spiral stair cases including landings etc. upto all floor level.

Providing tor steel reinforcement(Fe 415/500 D as per design) for R.C.C. work including bending binding and placing in position complete upto all floor level. Tor Steel.

Half brick masonary in common burnt clay building bricks in super structure in cement mortor 1:4 (1cement :4sand) Ist class bricks.upto all floors.

Providing brick work using common burnt clay building bricks in super structure above level upto all heights and all floor level in cement mortor 1:6 1 Cement : 6sand).in Ist class bricks.

Filling in plinth with sand under floors including watering, ramming consolidating and dressing complete.

Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jamb lock, beed and if required angle thrashold of mild steel angle of section 50x25mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with spilt and tails to Nos. jamb including steel butt hinges 2.5mm and shock absorber as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer in-charge. a) Profile-A.

b) Profile-B

C) Profile-C

Providing wood work in frame of doors, windows, clearstorey windows and other frames wrought framed and fixed in position. Sal Wood.

Providing and fixing panelled glazed or panelled and glazed shutter for doors,windows and clearstorey windows including black enamelled iron butt hinges with necessary screws. 40mm thick Ist class Deodar wood.

Providing and fixing wire gauge shutter using galvanised M.S.wire gauge of I.S. gauge designation 85G with wire of dia 0.56mm for doors, windows and clearstorey windows including bright finished black enamelled iron hinges with necessary screws. 40mm thick Ist class Deodar wood.

Providing and fixing particle board lining with butt jointing and nails (frame work and cover fillets to be measured and paid separately). 19mm thick.

Providing and fixing flush door shutters decorative type core of block board construction with frame of Ist class hard wood and well matched Ist class Indian Teak plyveneering with vertical grains or cross bends and face veneering on both faces of shutter.25mm thick including black enamelled M.S.Piano hinges.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolt and nuts screws etc. complete. 300 x 16mm.

Providing and fixing aluminium tower bolt (berrel type) anodized transparant or dyed to required shade and colour with screws etc. complete. a) 250 x 10mm size.

b) 150 x 10mm size.

Providing and fixing aluminium handles anodized transparant or dyed to reqd.colour and shade with necessary screws etc. complete. 125mm.

Providing and fixing bright finished hard drawn hooks and eyes.200mm.

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete.

providing and fixing 25mm diameter M.S. curtain rod and brackets including necessary fittings complete in all respects.

Providing and fixing bright finished or / and black enamelled iron ( Helical door spring 150mm )

Providing and fixing M.S.Grills of required patterns in wooden frames of windows etc. with M.S.flat, square or round bars with round headed bolts and nuts of by screws.Plain grills.

6mm cement plaster to ceiling with cement mortor 1:4 (1cement :4sand).

15mm cement plaster in single coat on rough side of brick/ stone/concrete walls for interior plastering upto floor two level including arrises internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girthand finished even and smooth in cement mortor 1:6(1cement :6sand).

15mm cement plaster in single coat on fair side of brick/ stone/concrete walls for interior plastering upto floor two level including arrises internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girthand finished even and smooth in cement mortor 1:6(1cement :6sand).

Providing and fixing on wall face PVC (D-Plast).rain water pipes of working pressure not less than 4.5kg/Sqm. Including filling the joints with approved adhesive complete. 100mm dia pipes.

Providing and fixing wall face PVC (D-Plats). accessories for rain water pipes including filling the joints with approved adhesive complete. a) PVC.Plain bend. 100mm nominal size.

b) PVC.Plain shoes 100mm nominal size.

Providing and fixing M.S.holder batt clamps of approved design to C.I. ort S.C. I pipes embeded in and including cement concrete blocks 10 x 10 x 10cm of 1:2:4 mix (1cement :2sand: 4graded stone aggregate 20mm nominal size) and cost of cutting holes and making good the wall etc.100mm diametre.

Making khurras 45 x 45cm with average minimum thickness of 5cm cement concrete 1:2:4 (1cement :2sand:4graded stone aggregate 20mm nominal size) finished with 12mm cement plaster 1:3 (1cement :3sand) and coat of neat cement rounding the outlet complete.

Kota stone slab flooring 20mm (average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 25mm thick.

Kota stone slab 25mm thick in riser of steps, skiting dado and pillars lain on 12mm (average) thick cement mortar 1:3(1cement :3sand) and jointed with grey cement slurry with pigment to match the shade of the slab including rubbing and polishing complete.

Preceast terrazzo tiles hydraulic compressed 20mm thick with marble chips of specified size laid in floors,treads of steps and landings on a bed of 25 mm average thickness of cement mortar 1:6 (1 cement : 6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) incliding rubbing and poloshing complete with tiles of following shaded: (colured tile ).

Prov.and laying spartic ceremic tiles 5.5 mm thick in flooring (300 X 300 mm.size) treads of steps laid on a bed of 12 mm thick cement mortar 1:3 ( 1 cement : 3 sand) finished with flush pointing in white cement.

White / coloured glazed tiles 6mm thick in skirting rises of steps and dado 12mm thick cement mortar 1:3 (1cement :3sand) and jointed with cement slurry.

painting top of roofs with bitumen of approved quality at 17kg. for 10sqm. impregnated with a coat of sand at 0.06cum per 10sqm. Including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete with residual type petroleum bitumen of penetration 80/100 grade.

Providing and fixing P.V.C. bitumen sheet 300 micron.

lime concrete terracing on roofs average thickness 10cm laid to fall with 25mm nominal size stone/brick aggregate and 50% lime mortar 1:2 (1lime putty :2 surkhi) rammed and finished with gur and balgiri treatment complete and covered with flat brick tiles grouted with cement mortar 1:3 (1cement :3sand) over 12mm layer of cement mortar 1:3 (1cement :3sand) and finished neat.

Providing gola in lime concrete with 25mm nominal size stone / brick aggregate and 50% of lime mortar 1:2 (1 lime putty :2 surkhi) under the drip course and finished with lime plaster 1:2 (1lime putty :2 surkhi) complete.

Providing plinth protectin 50mm thick in cement concrete 1:3:6 (1cement:3sand:6graded stone aggregate 20mm nominal size).Under layer for plinth protection of 75mm thick (un-consolidated)bed of dry brick/stone aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including prepaaation of ground as per instruction of the Engineer-in-charge.

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand papered complete with ready mixed pirming paint brushing red lead, red-oxide/zinc oxide chrome.

Painting two coats(excluding priming coat) over new steel and other metal surface either enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. Enamle white paint.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matterready mixed paint brushing with wood primer pink.

Painting two coat (excluding priming coat) on previously painted wood and wood based surface with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping. with ready mixed paint other than white.

Steel work welded with built up sections, trusses and framed work including cutting hoisting, fixing in position and applying a priming coat of red lead paint in grating framed guard bars, ladders railing, brackets and similar work.

Applying birla white wall care putty over plaster surface after throughly brushing the surface free from mortat drops, dust, loose material and other foreign matters sand appered smooth t give final matter finish to the surface complete.

Distempering (two coats) with oilbound washable distemper of approved brand and manufacture and of required shade on decorated wall surfaces to give an even shade after thoroughly brushing the surface cleaning of all grease, dirt,loose pieces of scales and also including preparing the surface even and sand papered smooth.

Finishing wall with weather proo exterior grade emulsion of Asian (Apex) brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.

Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal braces or 40mm x 40mm x 6mm angle iron 3.15mm M.S. gusset plates at junctions and corners 25mm dia pulley, 40mm x 40mm x 6mm angle and T iron guide at the top and bottom respectively, including applying a priming coat of red lead paint.

constructing course rubber hammer dressed U shape open surface drains with side wall 15x22 cm in cement mortar 1:6( 1 cement : 6 sand ) and inside plastering with cement plaster 1 : 3 ( 1 cement : 3 sand ) including earth work and laying 10cm cement concrete in 1 : 5 : 10 ( 1 cement : 5 sand :10 graded stone aggregate ) of 40mm nominal size) and 7.5 cm cement concrete 1 : 2 :4 ( 1 cement : 2 sand :4 graded stone aggregate ) of 20mm nominal size) and finished with a floating coat of neat cement complete as per standered design.

Excavation in drains & channels etc. in earth work in all kind of soil including dressing of side and and bed and disposing of surplus excavated earth upto all leads and lifts in all kind of soil disposed earth to be levelled and neatly dressed.

Providing and fixing wall , ceiling and floor galvanised mild steel tubes (medium grade) tube fitting and clamps including making good the wall, ceiling and floors.a) 15mm nominal bore.minium weight 1.22kg. Per running mtr.

Providing and laying in trenches galvanised mild steel tubes (medium grade) tube fitting (earth work in trenches to be measured and paid for separately) a) 20mm nominal bore. Minium weight 1.57kg. Per running mtr.

Making connection of galvanised mild steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee i/c cutting and threading the pipe complete.

Providing and fixing PVC pipe spigot and socket soils waste and ventilating pipes Ilead caulked joints to be measured and paid for separately). a) 100mm nominal bore.

b) 75mm nominal bore.

Providing and fixing PVC fittings and accessories. a) Plain bend 100mm nominal dia.

b) Single equal branch of required degree. Plain bend 100mm nominal size.

c) Double equal branch of required degree with oval access door insertion rubber washers 3mm thick bold and nuts complete. 100mm nominal size.

Providing and fixing PVC cowl. 100mm nominal size.

Providing and fixing PVC floor trap of self cleaning design with PVC screwed down or hinged grating with or without vent arm complete i/c cost of cutting and making good the walls and floors. 100mm nominal dia.

Providing and fixing viterious china wash down water closet (european type W.C.pan) with integral P or S trap including jointing the trap with soil pipes in cement mortar 1:1 (1cement :1sand) (seat and cover to be measured and paid for separately). Anglo Indian (Universal Closet) confirming to IS code 2556 Part-I and part-II only

Providing and fixing PVC10.00 / 12.50 / 15.00 ltrs. Viterous China low level flushing cistern with a pair of C.I.or Mild steel brackets complete with fittings such as lead valve less syphon. 15mm nominal size brass ball valve with polythene float, C.P.brass handles, unions and couplings for connections with inlet outlet and overflow pipes, 40mm dia C.P. flush bend including cutting holes and making good the same and connecting the flush bend with cistern and closet (overflow) pipe to be measured and paid for separately).

Providing and fixing plastic seat cover solid/ hollow type for wash down water closet with C.P.brass hinges and rubber washers. White plastic cover.confirming to grade I.S. 2548.

Providing and fixing jet for W.C. seat complete in all respects.

Providing and fixing viterous china wash basin with single hole for pillar tap with C.I or M.S. brackets painted white including cutting holes and making good the same but excluding fittings. Flat Back 630mm x 450mm.

Providing and fixing M.S steel kitchen sink with M.S.Brackets, including cutting holes in walls and making good the all necessary fittings complete in all respect. 750mm x 450mmx 250mm.

providing and fixing C.P.Brass waste for wash basin or sink. 32mm dia.

Providing and fixing 32mm dia PVC pipes for wash basin or sink including brass check nut.

Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers.

Providing and fixing C.P.Brass Towell rail complete with C.P.Brass brackets fixed to wooden plugs with C.P.brass. 600mm x 20mm.

Providing and fixing charomium plated brass soap dish with C.P.brass brackets fixed to wooden cleats with C.P.Brass screws.

Providing and fixing C.P.Brass bib tap with capstan head. 15mm dia,

Providing and fixing C.P.brass Pillar tap with capaston head. 15mm dia.

Providing and fixing brass stop cock. 15mm dia.

Providing and fixing bath shower. 15mm nominal size.

Providing and fixing brass full way valve with wheel. (i) 15mm nominal size.

Providing and fixing P.V.C. Connection pipe with brass unions. 45cm length.15mm nominal bore.

Providing and fixing 100mm sand cast iron grating for gully floor or nahani traps.

Providing and fixing P.V.C.water storage tank. 1000 ltrs. Capacitt with all necessary fittings.

Excavation in foundations, trenches etc. in earth work in kind of soil, stacking the excavated soil in all distance. Clear from the edge of the excavation and then returning the stacked soil in 15cm layers when required into plinths, sides of foundations etc. consolidating each deposited layers by rammeing and watering and then disposing of all surplus excavated earth as directed within a all leads and lifts in all kind of soils.

Providing and laying cement concrete 1:4:8 (1cement :4sand : 8 graded stone aggregate 40mm nominal size) and curring complete excluding the cost of form work in foundation and plinth.

Brick work using common burnt clay building bricks in foundation and plinth in cement mortor 1:4 (1cement :4sand) Ist class bricks.

Half brick masonary in common burnt clay building bricks in super structure in cement mortor 1:4 (1cement :4sand) Ist class bricks.upto all floors.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30 x 30 x 5mm so as to give a fair finish including centering,shuttering strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling in all height and removal of the same for in-situ reinforced concrete and plain concrete work in:- a) Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. upto 200mm in thickness.

Providing and laying cement concrete 1:2:4 (1cement :2sand :4graded stone aggregate 20mm nominal size) and curring complete xcluding cost of form work and re-inforcement for reinforced concrete work in:- a) Suspended floor, roofs, landing and shelves and their supports balconies beams, girders, bressumers and cantilever upto floor two level.

Providing mild steel/tor steel reinforcement for R.C.C. work including bending binding and placing in position complete upto floor two level. Tor steel.

15mm cement plasterin single coat on fair side of brick/ stone/concrete walls for interior plastering upto all floors level including arrises internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girthand finished even and smooth in cement mortor 1:6(1cement :6sand).

Finishing walls with float coat of neat cement slurry.

Supply and stacking at site brick aggregate 50mm nominal size.

Providing 200mm wide cast iron rungs with chequered or ribbed non slip surface including fixing in man hole woth 200 x 200 x100mm cement concrete 1:3;6 mix (1cement :3sand ;6graded stone aggregate 20mm nominal size.

Supplying R.C.C.fibre cover with frame for manhole cover for 560mm internal dia.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete i) 150mm

Constructing manhole with R.C.C. top slab in 1:2:4 (1cement:2sand:4grade stone aggregate 20mm nominal size) foundation concrete 1:4;8 (1cement: 4sand:8graded stone aggregate40mm nominal size) inside plastering 15mm thick with cement mortar 1:3(1cement:3sand)finished with floating coat of neat cement and making channels ion cement concrete 1:2:4 (1cement :2sand: 4graded stone aggregate 20mm nominal size) finished smooth complete I/c curing complete and testing. (a) Inside size 800x800mm and 500mm. Deep including R.C.C. cover and frame medium duty 455mmX610mm internal dia with 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1cement :3sand).complete.

b) Inside size 1200 x 900mm and 1.00 mtr. Deep including R.C.C. cover and frame medium duty 560mm internal dia with 200mm thick walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (1cement :3sand).complete.

Suresh Kumar